Benchmark #43664 - pibenchmarks.com

Brand: Geekworm X872 Pi NVMe Expansion Board
SSD (M.2 NVMe)
#247 / 1,679
65
#465 / 1,679
#449 / 984
#259 / 281
7,262
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2021-04-10 07:38:33
#43,664
9,700
+2,438 (+25.13%)
Koguma
ADATA XPG SSD SX8100 M.2 2280 XPG Gaming 512GB PCIe NVME using X872 adapter

Storage Details
Geekworm X872 Pi NVMe Expansion Board
SSD (M.2 NVMe)
128G
SSD
Geekworm
X872NVME
3.00
5,000
1d6b:0583
0x1d6b (Linux Foundation)
0x0583 (Digital Camera)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
131 MB/s
267.31 MB/s
260.11 MB/s
21,135 IOPS
29,767 IOPS
84,540 KB/s
119,069 KB/s
27,025 KB/s
28,570 KB/s
27,282 KB/s
34,079 KB/s

inxi Results
System: Kernel: 5.10.0-0.bpo.4-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0xb66b1645 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes elevator=deadline cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 net.ifnames=0 rootwait Console: tty pts/0 Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Memory: RAM: total: 7.7 GiB used: 520.8 MiB (6.6%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 170x35 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-0.bpo.4-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 478.78 GiB used: 6.82 GiB (1.4%) ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: SanDisk model: SU02G size: 1.84 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB model: X872 NVME size: 476.94 GiB block-size: physical: 4096 B logical: 512 B rotation: SSD rev: 0208 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 128 GiB size: 126.08 GiB (98.50%) used: 6.33 GiB (5.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: c89b2c77-ad36-4429-9d77-3c4047d33ac4 ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 120.7 MiB (40.4%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: CF4A-311E ID-3: /var/lib/rancher raw-size: 340.68 GiB size: 340.52 GiB (99.95%) used: 379.6 MiB (0.1%) fs: xfs block-size: 4096 B dev: /dev/sda3 maj-min: 8:3 label: RPIDATA uuid: eb735ca5-a5e2-4108-a23a-cf5a51186ca6 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: partition size: 7.96 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda4 maj-min: 8:4 label: RPISWAP uuid: c6677d3c-7d7c-4e68-89da-f97acc5d39a1 Unmounted: ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 250 MiB fs: ext3 label: N/A uuid: d23f4627-53fc-4905-ae31-588b8679a877 ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 150 MiB fs: ext3 label: N/A uuid: 426d3c23-64cc-4dd9-bc2e-816fc57a6c43 ID-3: /dev/mmcblk1p3 maj-min: 179:3 size: 1.28 GiB fs: vfat label: nook uuid: 4B3D-5A8D USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 152d:0583 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 431 lib: 222 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/puppet-tools.list 1: deb http: //apt.puppet.com buster puppet-tools Processes: CPU top: 5 of 132 1: cpu: 3.7% command: init pid: 1 mem: 9.15 MiB (0.1%) 2: cpu: 0.6% command: dockerd pid: 537 mem: 84.1 MiB (1.0%) 3: cpu: 0.3% command: containerd pid: 521 mem: 55.7 MiB (0.7%) 4: cpu: 0.2% command: systemd-journald pid: 227 mem: 7.29 MiB (0.0%) 5: cpu: 0.2% command: systemd-udevd pid: 240 mem: 4.39 MiB (0.0%) Memory top: 5 of 132 1: mem: 84.1 MiB (1.0%) command: dockerd pid: 537 cpu: 0.6% 2: mem: 55.7 MiB (0.7%) command: containerd pid: 521 cpu: 0.3% 3: mem: 9.15 MiB (0.1%) command: init pid: 1 cpu: 3.7% 4: mem: 8.02 MiB (0.1%) command: systemd pid: 699 cpu: 0.0% 5: mem: 7.29 MiB (0.0%) command: systemd-journald pid: 227 cpu: 0.2% Info: Processes: 132 Uptime: 2m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.0-0.bpo.4-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 
           parameters:  dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0xb66b1645 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw 
           fsck.repair=yes elevator=deadline cgroup_enable=cpuset cgroup_memory=1 
           cgroup_enable=memory swapaccount=1 net.ifnames=0 rootwait 
           Console: tty pts/0 Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Memory:    RAM: total: 7.7 GiB used: 520.8 MiB (6.6%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: N/A stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Display: server: No display server data found. Headless machine? tty: 170x35 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.0-0.bpo.4-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 478.78 GiB used: 6.82 GiB (1.4%) 
           ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: SanDisk model: SU02G size: 1.84 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB model: X872 NVME size: 476.94 GiB block-size: 
           physical: 4096 B logical: 512 B rotation: SSD rev: 0208 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 128 GiB size: 126.08 GiB (98.50%) used: 6.33 GiB (5.0%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: c89b2c77-ad36-4429-9d77-3c4047d33ac4 
           ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 120.7 MiB (40.4%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: CF4A-311E 
           ID-3: /var/lib/rancher raw-size: 340.68 GiB size: 340.52 GiB (99.95%) 
           used: 379.6 MiB (0.1%) fs: xfs block-size: 4096 B dev: /dev/sda3 maj-min: 8:3 
           label: RPIDATA uuid: eb735ca5-a5e2-4108-a23a-cf5a51186ca6 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 7.96 GiB used: 0 KiB (0.0%) priority: -2 
           dev: /dev/sda4 maj-min: 8:4 label: RPISWAP uuid: c6677d3c-7d7c-4e68-89da-f97acc5d39a1 
Unmounted: ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 250 MiB fs: ext3 label: N/A 
           uuid: d23f4627-53fc-4905-ae31-588b8679a877 
           ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 150 MiB fs: ext3 label: N/A 
           uuid: 426d3c23-64cc-4dd9-bc2e-816fc57a6c43 
           ID-3: /dev/mmcblk1p3 maj-min: 179:3 size: 1.28 GiB fs: vfat label: nook uuid: 4B3D-5A8D 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 152d:0583 class-ID: 0806 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 431 lib: 222 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/puppet-tools.list 
           1: deb http: //apt.puppet.com buster puppet-tools
Processes: CPU top: 5 of 132 
           1: cpu: 3.7% command: init pid: 1 mem: 9.15 MiB (0.1%) 
           2: cpu: 0.6% command: dockerd pid: 537 mem: 84.1 MiB (1.0%) 
           3: cpu: 0.3% command: containerd pid: 521 mem: 55.7 MiB (0.7%) 
           4: cpu: 0.2% command: systemd-journald pid: 227 mem: 7.29 MiB (0.0%) 
           5: cpu: 0.2% command: systemd-udevd pid: 240 mem: 4.39 MiB (0.0%) 
           Memory top: 5 of 132 
           1: mem: 84.1 MiB (1.0%) command: dockerd pid: 537 cpu: 0.6% 
           2: mem: 55.7 MiB (0.7%) command: containerd pid: 521 cpu: 0.3% 
           3: mem: 9.15 MiB (0.1%) command: init pid: 1 cpu: 3.7% 
           4: mem: 8.02 MiB (0.1%) command: systemd pid: 699 cpu: 0.0% 
           5: mem: 7.29 MiB (0.0%) command: systemd-journald pid: 227 cpu: 0.2% 
Info:      Processes: 132 Uptime: 2m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #43664 - Brand: Geekworm X872 Pi NVMe Expansion Board