Benchmark #43786 - pibenchmarks.com

Brand: Crucial MX500 Series
SSD (2.5" SATA)
#24 / 1,665
517
#515 / 1,665
#498 / 977
#93 / 370
6,855
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-12 14:33:42
#43,786
9,095
+2,240 (+24.63%)
pi

Storage Details
Crucial MX500 Series
SSD (2.5" SATA)
500G
SSD
Crucial
CT500MX500SSD1
2.5 inch
SATA
3.00
5,000
1d6b:0715
0x1d6b (Linux Foundation)
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
2,000 (+500)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
233 MB/s
307.29 MB/s
287.55 MB/s
13,708 IOPS
24,556 IOPS
54,832 KB/s
98,225 KB/s
28,248 KB/s
29,013 KB/s
18,607 KB/s
30,396 KB/s

inxi Results
System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=ba08306c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Memory: RAM: total: 3.81 GiB used: 1.95 GiB (51.2%) gpu: 128 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1440 Speed: 2000 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-2d081f40aeec state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-8245648bf993 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: br-ca866444bb7a state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: br-dedeb6b0662b state: down mac: IP v4: scope: global broadcast: IF-ID-5: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-6: veth04f5c3e state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth304a5af state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth5ddec55 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethadf7b3e state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethae9ea75 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethe40f81d state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethe46791a state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethedc2526 state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethf9f60e1 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 465.76 GiB used: 12.94 GiB (2.8%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB block-size: physical: 4096 B logical: 512 B rotation: SSD rev: M3CR scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 465.51 GiB size: 458.2 GiB (98.43%) used: 12.89 GiB (2.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 66f68227-b1ae-4493-9ef5-e593576a6e81 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.7 MiB (19.3%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 4467-8C16 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 1.8 MiB (1.8%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA chip-ID: 2109:0715 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2054 lib: 923 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 246 1: cpu: 2.2% command: sidekiq pid: 4631 mem: 404.5 MiB (10.7%) 2: cpu: 2.0% command: influxd pid: 2449 mem: 104.8 MiB (2.7%) 3: cpu: 0.9% command: redis-server pid: 4492 mem: 3.59 MiB (0.0%) 4: cpu: 0.9% command: puma: pid: 14666 mem: 439.8 MiB (11.6%) 5: cpu: 0.8% command: puma: pid: 14807 mem: 434.8 MiB (11.5%) Memory top: 5 of 246 1: mem: 439.8 MiB (11.6%) command: puma: pid: 14666 cpu: 0.9% 2: mem: 434.8 MiB (11.5%) command: puma: pid: 14807 cpu: 0.8% 3: mem: 404.5 MiB (10.7%) command: sidekiq pid: 4631 cpu: 2.2% 4: mem: 393.7 MiB (10.4%) command: puma pid: 4576 cpu: 0.0% 5: mem: 104.8 MiB (2.7%) command: influxd pid: 2449 cpu: 2.0% Info: Processes: 246 Uptime: 11d 23h 44m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=ba08306c-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Memory:    RAM: total: 3.81 GiB used: 1.95 GiB (51.2%) gpu: 128 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1440 
           Speed: 2000 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 
           4: 2000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: no 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: br-2d081f40aeec state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: br-8245648bf993 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: br-ca866444bb7a state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: br-dedeb6b0662b state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-5: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-6: veth04f5c3e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth304a5af state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth5ddec55 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethadf7b3e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethae9ea75 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: vethe40f81d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: vethe46791a state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-13: vethedc2526 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-14: vethf9f60e1 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 465.76 GiB used: 12.94 GiB (2.8%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT500MX500SSD1 
           size: 465.76 GiB block-size: physical: 4096 B logical: 512 B rotation: SSD 
           rev: M3CR scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 465.51 GiB size: 458.2 GiB (98.43%) used: 12.89 GiB (2.8%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 66f68227-b1ae-4493-9ef5-e593576a6e81 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.7 MiB (19.3%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 4467-8C16 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 1.8 MiB (1.8%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s power: 8mA chip-ID: 2109:0715 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2054 lib: 923 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 246 
           1: cpu: 2.2% command: sidekiq pid: 4631 mem: 404.5 MiB (10.7%) 
           2: cpu: 2.0% command: influxd pid: 2449 mem: 104.8 MiB (2.7%) 
           3: cpu: 0.9% command: redis-server pid: 4492 mem: 3.59 MiB (0.0%) 
           4: cpu: 0.9% command: puma: pid: 14666 mem: 439.8 MiB (11.6%) 
           5: cpu: 0.8% command: puma: pid: 14807 mem: 434.8 MiB (11.5%) 
           Memory top: 5 of 246 
           1: mem: 439.8 MiB (11.6%) command: puma: pid: 14666 cpu: 0.9% 
           2: mem: 434.8 MiB (11.5%) command: puma: pid: 14807 cpu: 0.8% 
           3: mem: 404.5 MiB (10.7%) command: sidekiq pid: 4631 cpu: 2.2% 
           4: mem: 393.7 MiB (10.4%) command: puma pid: 4576 cpu: 0.0% 
           5: mem: 104.8 MiB (2.7%) command: influxd pid: 2449 cpu: 2.0% 
Info:      Processes: 246 Uptime: 11d 23h 44m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #43786 - Brand: Crucial MX500 Series