Benchmark #4388 - pibenchmarks.com

Brand: Samsung SD EVO (00000)
C10 U1
#27 / 1,701
579
#1,421 / 1,701
#267 / 405
1,043
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-11-30 08:50:54
#4,388
976
-67 (-6.86%)
Anonymous
Samsung 64GB micoSD

Secure Digital (SD) Card Details
Samsung SD EVO (00000)
C10 U1
64
SD
Samsung
00000
SDXC
3.00
0x1b
SM
1.0
10/2013
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
14.7 MB/s
20.05 MB/s
21.01 MB/s
643 IOPS
2,161 IOPS
2,575 KB/s
8,644 KB/s
7,607 KB/s
2,663 KB/s
7,559 KB/s
2,774 KB/s

inxi Results
System: Host: raspberry Kernel: 4.19.57-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.0 MiB used: 243.8 MiB (24.3%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.57-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 chip ID: 0424:7800 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 58.56 GiB used: 25.31 GiB (43.2%) ID-1: /dev/mmcblk0 model: 00000 size: 58.56 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 58.50 GiB size: 57.52 GiB (98.32%) used: 25.29 GiB (44.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: 1263ae8d-aaf3-41b6-9ac0-03e7fecb5d6a ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) used: 23.5 MiB (42.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: CB99-4C7E Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //mirrordirector.raspbian.org/raspbian/ buster main contrib non-free rpi firmware 2: deb-src http: //mirrordirector.raspbian.org/raspbian/ buster main contrib non-free rpi firmware No active apt repos in: /etc/apt/sources.list.d/raspi.list Processes: CPU top: 5 1: cpu: 0.5% command: packagekitd pid: 3208 mem: 12.7 MiB (1.3%) 2: cpu: 0.4% command: -bash pid: 3095 mem: 4.03 MiB (0.4%) 3: cpu: 0.3% command: php-fpm: pid: 498 mem: 45.8 MiB (4.8%) 4: cpu: 0.3% command: php-fpm: pid: 499 mem: 43.5 MiB (4.6%) 5: cpu: 0.3% command: php-fpm: pid: 852 mem: 38.7 MiB (4.1%) Memory top: 5 1: mem: 57.9 MiB (6.1%) command: mysqld pid: 483 cpu: 0.0% 2: mem: 45.8 MiB (4.8%) command: php-fpm: pid: 498 cpu: 0.3% 3: mem: 43.5 MiB (4.6%) command: php-fpm: pid: 499 cpu: 0.3% 4: mem: 38.7 MiB (4.1%) command: php-fpm: pid: 852 cpu: 0.3% 5: mem: 23.5 MiB (2.5%) command: php-fpm: pid: 408 cpu: 0.0% Info: Processes: 118 Uptime: 8h 32m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 4.6/4.9/6/8 Client: Sudo v: 1.8.27 inxi: 3.0.37

inxi Results

System:    Host: raspberry Kernel: 4.19.57-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.0 MiB used: 243.8 MiB (24.3%) gpu: 64.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.57-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:4 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 58.56 GiB used: 25.31 GiB (43.2%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 58.56 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 58.50 GiB size: 57.52 GiB (98.32%) used: 25.29 GiB (44.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: N/A 
           uuid: 1263ae8d-aaf3-41b6-9ac0-03e7fecb5d6a 
           ID-2: /boot raw size: 56.0 MiB size: 55.9 MiB (99.90%) used: 23.5 MiB (42.1%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: CB99-4C7E 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirrordirector.raspbian.org/raspbian/ buster main contrib non-free rpi firmware
           2: deb-src http: //mirrordirector.raspbian.org/raspbian/ buster main contrib non-free rpi firmware
           No active apt repos in: /etc/apt/sources.list.d/raspi.list 
Processes: CPU top: 5 
           1: cpu: 0.5% command: packagekitd pid: 3208 mem: 12.7 MiB (1.3%) 
           2: cpu: 0.4% command: -bash pid: 3095 mem: 4.03 MiB (0.4%) 
           3: cpu: 0.3% command: php-fpm: pid: 498 mem: 45.8 MiB (4.8%) 
           4: cpu: 0.3% command: php-fpm: pid: 499 mem: 43.5 MiB (4.6%) 
           5: cpu: 0.3% command: php-fpm: pid: 852 mem: 38.7 MiB (4.1%) 
           Memory top: 5 
           1: mem: 57.9 MiB (6.1%) command: mysqld pid: 483 cpu: 0.0% 
           2: mem: 45.8 MiB (4.8%) command: php-fpm: pid: 498 cpu: 0.3% 
           3: mem: 43.5 MiB (4.6%) command: php-fpm: pid: 499 cpu: 0.3% 
           4: mem: 38.7 MiB (4.1%) command: php-fpm: pid: 852 cpu: 0.3% 
           5: mem: 23.5 MiB (2.5%) command: php-fpm: pid: 408 cpu: 0.0% 
Info:      Processes: 118 Uptime: 8h 32m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 4.6/4.9/6/8 Client: Sudo v: 1.8.27 
           inxi: 3.0.37

Benchmark #4388 - Brand: Samsung SD EVO (00000)