Benchmark #44326 - pibenchmarks.com

Brand: Samsung eMMC (MBG4G)
MMC (Embedded)
#775 / 1,539
4
#1,100 / 1,539
#67 / 71
#68 / 88
1,322

Overview
2021-04-24 10:51:34
#44,326
3,907
+2,585 (+66.16%)
Anonymous

Storage Details
Samsung eMMC (MBG4G)
MMC (Embedded)
27.7G
MMC
Samsung
MBG4G
Embedded
None

System Board Details
		Amazon.com
Toshiba Encore WT8-A
WT8-A
Toshiba
Intel Atom Z3740
4
4,000
Encore
1,066

Operating System

Debian GNU/Linux 10 (buster)
x86_64

Benchmark Results
59 MB/s
141.65 MB/s
135.42 MB/s
5,385 IOPS
5,122 IOPS
21,540 KB/s
20,490 KB/s
15,883 KB/s
15,571 KB/s
14,896 KB/s
16,496 KB/s

inxi Results
System: Kernel: 4.19.0-13-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-13-amd64 root=UUID=b09af36e-eb1b-4e4c-b96a-0df830e7bfab ro quiet Console: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: Laptop System: TOSHIBA product: TOSHIBA WT8-A v: PDW09E-00100EEN Mobo: TOSHIBA model: Encore v: Type2 - Board Version UEFI: TOSHIBA v: 1.80 date: 10/10/2014 Battery: ID-1: BATC charge: 14.2 Wh (75.9%) condition: 18.7/19.8 Wh (94.7%) volts: 4.0 min: 3.8 model: TOSHIBA MALTA type: Li-ion status: Not charging cycles: 167 Memory: RAM: total: 1.83 GiB used: 622.6 MiB (33.2%) Array-1: capacity: 4 GiB slots: 2 EC: None max-module-size: 2 GiB note: est. Device-1: DIMM0 size: 1024 MiB info: single-bank speed: 1066 MT/s type: DDR3 detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: N/A N/A Device-2: DIMM1 size: 1024 MiB info: single-bank speed: 1066 MT/s type: DDR3 detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: N/A N/A PCI Slots: Message: No PCI Slot data found. CPU: Info: Quad Core model: Intel Atom Z3740 bits: 64 type: MCP arch: Silvermont family: 6 model-id: 37 (55) stepping: 3 microcode: 321 cache: L1: 56 KiB L2: 1024 KiB bogomips: 10664 Speed: 931 MHz min/max: 533/1866 MHz base/boost: 1339/4000 volts: 3.5 V ext-clock: 133 MHz Core speeds (MHz): 1: 883 2: 679 3: 533 4: 533 Flags: 3dnowprefetch acpi aes aperfmperf apic arat arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept erms est flexpriority fpu fxsr ht ida lahf_lm lm mca mce mmx monitor movbe msr mtrr nonstop_tsc nopl nx pae pat pbe pclmulqdq pdcm pebs pge pni popcnt pse pse36 pti rdrand rdtscp rep_good sep smep ss sse sse2 sse4_1 sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq tsc_reliable vme vmx vnmi vpid xtopology xtpr Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT disabled Type: meltdown mitigation: PTI Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display vendor: Toshiba America Info Systems driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:0f31 class-ID: 0300 Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev,vesa tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio message: bus/chip ids unavailable Device-2: bytcr-rt5640 driver: bytcr-rt5640 message: bus/chip ids unavailable Sound Server-1: ALSA v: k4.19.0-13-amd64 running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: Realtek RTL8152 Fast Ethernet Adapter type: USB driver: r8152 bus-ID: 1-1.2.2:4 chip-ID: 0bda:8152 class-ID: 0000 IF: enx00e04c3600b2 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: temporary dynamic scope: global IP v6: type: mngtmpaddr noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth45a645d state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth51b25d3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth9244b20 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethd2680e0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethe0478ea state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethfa9b33d state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethfb5775c state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.12 GiB used: 12.89 GiB (44.2%) ID-1: /dev/mmcblk2 maj-min: 179:0 vendor: Samsung model: MBG4GC size: 29.12 GiB block-size: physical: 512 B logical: 512 B rotation: SSD rev: 0x6 scheme: GPT SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 27.67 GiB size: 27.11 GiB (97.98%) used: 12.53 GiB (46.2%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk2p2 maj-min: 179:2 label: N/A uuid: b09af36e-eb1b-4e4c-b96a-0df830e7bfab ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 204 KiB (0.0%) fs: vfat block-size: 512 B dev: /dev/mmcblk2p1 maj-min: 179:1 label: N/A uuid: 61F0-39F4 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: partition size: 976 MiB used: 365.5 MiB (37.4%) priority: -2 dev: /dev/mmcblk2p3 maj-min: 179:3 label: N/A uuid: 9ed56873-886b-43d1-83ee-d4f461e49ed3 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Intel ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:07e6 class-ID: 0900 Hub-3: 1-1.2:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Device-1: 1-1.2.2:4 info: Realtek RTL8152 Fast Ethernet Adapter type: Network driver: r8152 interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 0bda:8152 class-ID: 0000 Sensors: System Temperatures: cpu: 41.0 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: apt: 1733 lib: 946 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian/ buster main 2: deb-src http: //deb.debian.org/debian/ buster main 3: deb http: //security.debian.org/debian-security buster/updates main 4: deb-src http: //security.debian.org/debian-security buster/updates main 5: deb http: //deb.debian.org/debian/ buster-updates main 6: deb-src http: //deb.debian.org/debian/ buster-updates main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=amd64] https: //download.docker.com/linux/debian buster stable Processes: CPU top: 5 of 202 1: cpu: 8.4% command: lcd_daemon.py started by: python3 pid: 1850 mem: 5.79 MiB (0.3%) 2: cpu: 6.9% command: python3 pid: 4370 mem: 78.0 MiB (4.1%) 3: cpu: 2.7% command: lcd4linux pid: 581 mem: 1.19 MiB (0.0%) 4: cpu: 1.0% command: [irq/25-inv6050:] pid: 160 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: dockerd pid: 637 mem: 33.9 MiB (1.8%) Memory top: 5 of 202 1: mem: 78.0 MiB (4.1%) command: python3 pid: 4370 cpu: 6.9% 2: mem: 47.3 MiB (2.5%) command: python3 pid: 2259 cpu: 0.4% 3: mem: 33.9 MiB (1.8%) command: dockerd pid: 637 cpu: 0.4% 4: mem: 20.0 MiB (1.0%) command: docker pid: 1878 cpu: 0.0% 5: mem: 14.6 MiB (0.7%) command: packagekitd pid: 10644 cpu: 0.3% Info: Processes: 202 Uptime: 15h 43m wakeups: 1 Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 4.19.0-13-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-13-amd64 
           root=UUID=b09af36e-eb1b-4e4c-b96a-0df830e7bfab ro quiet 
           Console: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: Laptop System: TOSHIBA product: TOSHIBA WT8-A v: PDW09E-00100EEN Mobo: TOSHIBA model: Encore v: Type2 - Board Version UEFI: TOSHIBA 
           v: 1.80 date: 10/10/2014 
Battery:   ID-1: BATC charge: 14.2 Wh (75.9%) condition: 18.7/19.8 Wh (94.7%) volts: 4.0 min: 3.8 
           model: TOSHIBA MALTA type: Li-ion status: Not charging cycles: 167 
Memory:    RAM: total: 1.83 GiB used: 622.6 MiB (33.2%) 
           Array-1: capacity: 4 GiB slots: 2 EC: None max-module-size: 2 GiB note: est. 
           Device-1: DIMM0 size: 1024 MiB info: single-bank speed: 1066 MT/s type: DDR3 
           detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: N/A 
           N/A 
           Device-2: DIMM1 size: 1024 MiB info: single-bank speed: 1066 MT/s type: DDR3 
           detail: synchronous bus-width: 32 bits total: 32 bits manufacturer: N/A part-no: N/A 
           N/A 
PCI Slots: Message: No PCI Slot data found. 
CPU:       Info: Quad Core model: Intel Atom Z3740 bits: 64 type: MCP arch: Silvermont family: 6 
           model-id: 37 (55) stepping: 3 microcode: 321 cache: L1: 56 KiB L2: 1024 KiB 
           bogomips: 10664 
           Speed: 931 MHz min/max: 533/1866 MHz base/boost: 1339/4000 volts: 3.5 V 
           ext-clock: 133 MHz Core speeds (MHz): 1: 883 2: 679 3: 533 4: 533 
           Flags: 3dnowprefetch acpi aes aperfmperf apic arat arch_perfmon bts clflush cmov 
           constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept erms est flexpriority 
           fpu fxsr ht ida lahf_lm lm mca mce mmx monitor movbe msr mtrr nonstop_tsc nopl nx pae 
           pat pbe pclmulqdq pdcm pebs pge pni popcnt pse pse36 pti rdrand rdtscp rep_good sep 
           smep ss sse sse2 sse4_1 sse4_2 ssse3 syscall tm tm2 tpr_shadow tsc tsc_adjust 
           tsc_deadline_timer tsc_known_freq tsc_reliable vme vmx vnmi vpid xtopology xtpr 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Not affected 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display 
           vendor: Toshiba America Info Systems driver: i915 v: kernel bus-ID: 00:02.0 
           chip-ID: 8086:0f31 class-ID: 0300 
           Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev,vesa tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio 
           message: bus/chip ids unavailable 
           Device-2: bytcr-rt5640 driver: bytcr-rt5640 message: bus/chip ids unavailable 
           Sound Server-1: ALSA v: k4.19.0-13-amd64 running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: no 
Network:   Device-1: Realtek RTL8152 Fast Ethernet Adapter type: USB driver: r8152 
           bus-ID: 1-1.2.2:4 chip-ID: 0bda:8152 class-ID: 0000 IF: enx00e04c3600b2 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: temporary dynamic scope: global 
           IP v6:  type: mngtmpaddr noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth45a645d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth51b25d3 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth9244b20 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethd2680e0 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethe0478ea state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethfa9b33d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethfb5775c state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Message: No bluetooth data found. 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 29.12 GiB used: 12.89 GiB (44.2%) 
           ID-1: /dev/mmcblk2 maj-min: 179:0 vendor: Samsung model: MBG4GC size: 29.12 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD rev: 0x6 
           scheme: GPT 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 27.67 GiB size: 27.11 GiB (97.98%) used: 12.53 GiB (46.2%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk2p2 maj-min: 179:2 label: N/A 
           uuid: b09af36e-eb1b-4e4c-b96a-0df830e7bfab 
           ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 204 KiB (0.0%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk2p1 maj-min: 179:1 label: N/A uuid: 61F0-39F4 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 976 MiB used: 365.5 MiB (37.4%) priority: -2 
           dev: /dev/mmcblk2p3 maj-min: 179:3 label: N/A 
           uuid: 9ed56873-886b-43d1-83ee-d4f461e49ed3 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Intel ports: 4 rev: 2.0 speed: 480 Mb/s chip-ID: 8087:07e6 
           class-ID: 0900 
           Hub-3: 1-1.2:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA 
           chip-ID: 1a40:0101 class-ID: 0900 
           Device-1: 1-1.2.2:4 info: Realtek RTL8152 Fast Ethernet Adapter type: Network 
           driver: r8152 interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 0bda:8152 
           class-ID: 0000 Sensors:   System Temperatures: cpu: 41.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: apt: 1733 lib: 946 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian/ buster main
           2: deb-src http: //deb.debian.org/debian/ buster main
           3: deb http: //security.debian.org/debian-security buster/updates main
           4: deb-src http: //security.debian.org/debian-security buster/updates main
           5: deb http: //deb.debian.org/debian/ buster-updates main
           6: deb-src http: //deb.debian.org/debian/ buster-updates main
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=amd64] https: //download.docker.com/linux/debian buster stable
Processes: CPU top: 5 of 202 
           1: cpu: 8.4% command: lcd_daemon.py started by: python3 pid: 1850 mem: 5.79 MiB (0.3%) 
           2: cpu: 6.9% command: python3 pid: 4370 mem: 78.0 MiB (4.1%) 
           3: cpu: 2.7% command: lcd4linux pid: 581 mem: 1.19 MiB (0.0%) 
           4: cpu: 1.0% command: [irq/25-inv6050:] pid: 160 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.4% command: dockerd pid: 637 mem: 33.9 MiB (1.8%) 
           Memory top: 5 of 202 
           1: mem: 78.0 MiB (4.1%) command: python3 pid: 4370 cpu: 6.9% 
           2: mem: 47.3 MiB (2.5%) command: python3 pid: 2259 cpu: 0.4% 
           3: mem: 33.9 MiB (1.8%) command: dockerd pid: 637 cpu: 0.4% 
           4: mem: 20.0 MiB (1.0%) command: docker pid: 1878 cpu: 0.0% 
           5: mem: 14.6 MiB (0.7%) command: packagekitd pid: 10644 cpu: 0.3% 
Info:      Processes: 202 Uptime: 15h 43m wakeups: 1 Init: systemd v: 241 runlevel: 3 
           target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #44326 - Brand: Samsung eMMC (MBG4G)