Benchmark #44439 - pibenchmarks.com

Brand: SanDisk U100
SSD (2.5" SATA)
#275 / 1,539
32
#952 / 1,539
#846 / 875
#340 / 363
2,074
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.fr Amazon.it

Overview
2021-04-27 06:16:15
#44,439
1,600
-474 (-29.63%)
Anonymous

Storage Details
SanDisk U100
SSD (2.5" SATA)
64G
SSD
SanDisk
SSDU10064GB
1.8 inch
SATA
2.10
480
0424:5580
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x5580 (SDCZ80 Flash Drive)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
ARMv7 v7l
4
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
16.3 MB/s
27.43 MB/s
27.84 MB/s
1,376 IOPS
1,874 IOPS
5,504 KB/s
7,496 KB/s
11,154 KB/s
7,476 KB/s
6,847 KB/s
7,640 KB/s

inxi Results
System: Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1000.2 MiB used: 385.9 MiB (38.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 82x26 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:4 chip-ID: 0424:7800 class-ID: ff00 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 59.63 GiB used: 9.28 GiB (15.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme drive model: SSD U100 64GB family: based SSDs size: 59.63 GiB block-size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: SSD rev: 0001 drive rev: KM.10.00 scheme: MBR SMART: yes state: enabled health: PASSED on: 9d 23h cycles: 288 read: 74.42 GiB written: 491.87 GiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.37 GiB size: 58.38 GiB (98.33%) used: 9.23 GiB (15.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.6 MiB (19.3%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 9F2D-0578 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 3.3 MiB (3.3%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 Device-2: 1-1.1.3:6 info: MGE UPS Systems UPS type: HID driver: usbfs interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 20mA chip-ID: 0463:ffff class-ID: 0300 Device-3: 1-1.2:5 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 0781:5580 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2169 lib: 1005 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 162 1: cpu: 4.6% command: [kworker/2:3-events] pid: 4881 mem: 0.00 MiB (0.0%) 2: cpu: 4.2% command: [kworker/2:1-mm_percpu_wq] pid: 4060 mem: 0.00 MiB (0.0%) 3: cpu: 0.9% command: pulseaudio pid: 969 mem: 8.70 MiB (0.9%) 4: cpu: 0.6% command: [kworker/u8:3-ext4-rsv-conversion] pid: 7770 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: smartd pid: 7956 mem: 3.17 MiB (0.3%) Memory top: 5 of 162 1: mem: 34.6 MiB (3.7%) command: xorg pid: 614 cpu: 0.0% 2: mem: 33.4 MiB (3.6%) command: lxpanel pid: 915 cpu: 0.2% 3: mem: 29.0 MiB (3.1%) command: applet.py started by: python3 pid: 930 cpu: 0.0% 4: mem: 21.7 MiB (2.3%) command: smokeping pid: 822 cpu: 0.0% 5: mem: 21.2 MiB (2.2%) command: pihole-ftl pid: 1090 cpu: 0.4% Info: Processes: 162 Uptime: 4d 20h 15m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           console=ttyAMA0,115200 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 1000.2 MiB used: 385.9 MiB (38.6%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 4 bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 82x26 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc 
           class-ID: mmcnr 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:4 
           chip-ID: 0424:7800 class-ID: ff00 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Message: No bluetooth data found. 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 59.63 GiB used: 9.28 GiB (15.6%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme 
           drive model: SSD U100 64GB family: based SSDs size: 59.63 GiB block-size: 
           physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: SSD rev: 0001 drive rev: KM.10.00 scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 9d 23h cycles: 288 read: 74.42 GiB 
           written: 491.87 GiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 59.37 GiB size: 58.38 GiB (98.33%) used: 9.23 GiB (15.8%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.6 MiB (19.3%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 9F2D-0578 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 3.3 MiB (3.3%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 0424:2514 class-ID: 0900 
           Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 
           speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 
           Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 
           Device-2: 1-1.1.3:6 info: MGE UPS Systems UPS type: HID driver: usbfs interfaces: 1 
           rev: 2.0 speed: 1.5 Mb/s power: 20mA chip-ID: 0463:ffff class-ID: 0300 Device-3: 1-1.2:5 info: SanDisk SDCZ80 Flash Drive type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA 
           chip-ID: 0781:5580 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2169 lib: 1005 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 162 
           1: cpu: 4.6% command: [kworker/2:3-events] pid: 4881 mem: 0.00 MiB (0.0%) 
           2: cpu: 4.2% command: [kworker/2:1-mm_percpu_wq] pid: 4060 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.9% command: pulseaudio pid: 969 mem: 8.70 MiB (0.9%) 
           4: cpu: 0.6% command: [kworker/u8:3-ext4-rsv-conversion] pid: 7770 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.5% command: smartd pid: 7956 mem: 3.17 MiB (0.3%) 
           Memory top: 5 of 162 
           1: mem: 34.6 MiB (3.7%) command: xorg pid: 614 cpu: 0.0% 
           2: mem: 33.4 MiB (3.6%) command: lxpanel pid: 915 cpu: 0.2% 
           3: mem: 29.0 MiB (3.1%) command: applet.py started by: python3 pid: 930 cpu: 0.0% 
           4: mem: 21.7 MiB (2.3%) command: smokeping pid: 822 cpu: 0.0% 
           5: mem: 21.2 MiB (2.2%) command: pihole-ftl pid: 1090 cpu: 0.4% 
Info:      Processes: 162 Uptime: 4d 20h 15m Init: systemd v: 241 runlevel: 5 
           target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #44439 - Brand: SanDisk U100