Benchmark #44659 - pibenchmarks.com

Brand: SanDisk Extreme Pro USB
SSD (Portable)
#49 / 1,672
303
#990 / 1,672
#910 / 983
#129 / 144
3,253
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-30 18:13:22
#44,659
2,112
-1,141 (-54.02%)
jobenvil
Raspberry Pi 3 Model B Plus rootfs on SanDisk Extreme USB 3.0 - overclock 1500 - RAM 540

Storage Details
SanDisk Extreme Pro USB
SSD (Portable)
31G
SSD
SanDisk
pSSD
1.8 inch
SATA
2.00
480
0781:5580
0x0781 (SanDisk Corp.)
0x5580 (SDCZ80 Flash Drive)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
ARMv7 v7l
4
1,500 (+100)
540 (+140)
540 (+40)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
29.4 MB/s
28.39 MB/s
29.58 MB/s
2,185 IOPS
2,045 IOPS
8,740 KB/s
8,180 KB/s
13,570 KB/s
12,574 KB/s
8,037 KB/s
9,321 KB/s

inxi Results
System: Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/sda2 rootfstype=ext4 rootwait ipv6.disable=1 Console: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1001.8 MiB used: 511.9 MiB (51.1%) gpu: 256 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 bogomips: 384 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:6 chip-ID: 0424:7800 class-ID: ff00 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.22 GiB used: 14.74 GiB (50.5%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme drive model: pSSD family: based SSDs size: 29.22 GiB block-size: physical: 512 B logical: 512 B sata: 2.6 speed: 6.0 Gb/s rotation: SSD rev: 0001 drive rev: 3 scheme: MBR SMART: yes state: enabled health: PASSED on: 330d 18h cycles: 352 read: 58.5 GiB written: 141.23 GiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 26.3 GiB size: 25.76 GiB (97.95%) used: 14.71 GiB (57.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A uuid: 1e102437-da6f-4b7f-aeac-f5a5cd9f38f9 ID-2: /boot raw-size: 56 MiB size: 55.9 MiB (99.90%) used: 35.4 MiB (63.3%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 787C-2FD4 Swap: Kernel: swappiness: 1 (default 60) cache-pressure: 50 (default 100) ID-1: swap-1 type: file size: 512 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Hub-3: 1-1.1:4 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 Device-2: 1-1.3:5 info: SanDisk SDCZ80 Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA chip-ID: 0781:5580 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1867 lib: 985 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi No active apt repos in: /etc/apt/sources.list.d/backports.list Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https: //repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/webmin.list 1: deb http: //download.webmin.com/download/repository sarge contrib Processes: CPU top: 5 of 144 1: cpu: 5.6% command: [kworker/1:2+events_freezable] pid: 71 mem: 0.00 MiB (0.0%) 2: cpu: 2.9% command: apps.plugin pid: 1032 mem: 4.14 MiB (0.5%) 3: cpu: 2.3% command: netdata pid: 798 mem: 45.9 MiB (6.1%) 4: cpu: 1.7% command: python.d.plugin started by: python pid: 1027 mem: 27.7 MiB (3.7%) 5: cpu: 1.0% command: node_exporter pid: 500 mem: 17.9 MiB (2.3%) Memory top: 5 of 144 1: mem: 45.9 MiB (6.1%) command: netdata pid: 798 cpu: 2.3% 2: mem: 27.7 MiB (3.7%) command: python.d.plugin started by: python pid: 1027 cpu: 1.7% 3: mem: 19.7 MiB (2.6%) command: cloudflared pid: 494 cpu: 0.1% 4: mem: 19.2 MiB (2.5%) command: miniserv.pl started by: perl pid: 973 cpu: 0.0% 5: mem: 17.9 MiB (2.3%) command: node_exporter pid: 500 cpu: 1.0% Info: Processes: 144 Uptime: 7m Init: systemd v: 241 runlevel: 5 default: 2 tool: systemctl Compilers: gcc: 8.3.0 alt: 4.6/4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           dwc_otg.lpm_enable=0 console=tty1 root=/dev/sda2 rootfstype=ext4 rootwait 
           ipv6.disable=1 
           Console: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 1001.8 MiB used: 511.9 MiB (51.1%) gpu: 256 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 4 bogomips: 384 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:3f300000 class-ID: mmcnr 
           Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:6 
           chip-ID: 0424:7800 class-ID: ff00 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           WAN IP:  
Bluetooth: Message: No bluetooth data found. 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 29.22 GiB used: 14.74 GiB (50.5%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme drive model: pSSD 
           family: based SSDs size: 29.22 GiB block-size: physical: 512 B logical: 512 B sata: 2.6 
           speed: 6.0 Gb/s rotation: SSD rev: 0001 
           drive rev: 3 scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 330d 18h cycles: 352 read: 58.5 GiB 
           written: 141.23 GiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 26.3 GiB size: 25.76 GiB (97.95%) used: 14.71 GiB (57.1%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A 
           uuid: 1e102437-da6f-4b7f-aeac-f5a5cd9f38f9 
           ID-2: /boot raw-size: 56 MiB size: 55.9 MiB (99.90%) used: 35.4 MiB (63.3%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 787C-2FD4 
Swap:      Kernel: swappiness: 1 (default 60) cache-pressure: 50 (default 100) 
           ID-1: swap-1 type: file size: 512 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 0424:2514 class-ID: 0900 
           Hub-3: 1-1.1:4 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 
           speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 
           Device-1: 1-1.1.1:6 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 
           Device-2: 1-1.3:5 info: SanDisk SDCZ80 Flash Drive type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 200mA 
           chip-ID: 0781:5580 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1867 lib: 985 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           No active apt repos in: /etc/apt/sources.list.d/backports.list 
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https: //repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/webmin.list 
           1: deb http: //download.webmin.com/download/repository sarge contrib
Processes: CPU top: 5 of 144 
           1: cpu: 5.6% command: [kworker/1:2+events_freezable] pid: 71 mem: 0.00 MiB (0.0%) 
           2: cpu: 2.9% command: apps.plugin pid: 1032 mem: 4.14 MiB (0.5%) 
           3: cpu: 2.3% command: netdata pid: 798 mem: 45.9 MiB (6.1%) 
           4: cpu: 1.7% command: python.d.plugin started by: python pid: 1027 mem: 27.7 MiB (3.7%) 
           5: cpu: 1.0% command: node_exporter pid: 500 mem: 17.9 MiB (2.3%) 
           Memory top: 5 of 144 
           1: mem: 45.9 MiB (6.1%) command: netdata pid: 798 cpu: 2.3% 
           2: mem: 27.7 MiB (3.7%) command: python.d.plugin started by: python pid: 1027 cpu: 1.7% 
           3: mem: 19.7 MiB (2.6%) command: cloudflared pid: 494 cpu: 0.1% 
           4: mem: 19.2 MiB (2.5%) command: miniserv.pl started by: perl pid: 973 cpu: 0.0% 
           5: mem: 17.9 MiB (2.3%) command: node_exporter pid: 500 cpu: 1.0% 
Info:      Processes: 144 Uptime: 7m Init: systemd v: 241 runlevel: 5 default: 2 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 4.6/4.9/6/8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.04

Benchmark #44659 - Brand: SanDisk Extreme Pro USB