Benchmark #44729 - pibenchmarks.com

Brand: Kingston A400S Series
SSD (2.5" SATA)
#1 / 1,675
2,842
#641 / 1,675
#619 / 984
#157 / 370
6,250
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-05-02 04:01:23
#44,729
7,581
+1,331 (+17.56%)
rrt
Kingston A400 SSD on Pi 4 using ORICO 2.5 inch Transparent 10Gbps Hard Drive Enclosure with Stand (2159C3-G2)

Storage Details
Kingston A400S Series
SSD (2.5" SATA)
120G
SSD
Kingston
SA400S37120
2.5 inch
SATA
3.00
5,000
1d6b:0715
0x1d6b (Linux Foundation)
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
50.9 MB/s
183.08 MB/s
94.85 MB/s
20,398 IOPS
23,246 IOPS
81,593 KB/s
92,985 KB/s
32,600 KB/s
23,813 KB/s
18,192 KB/s
28,084 KB/s

inxi Results
System: Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x2995f76d bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.71 GiB used: 1.68 GiB (45.3%) RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Message: No device data found. Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835 ALSA driver: bcm2835_alsa message: bus/chip ids unavailable Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth0aea054 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth29eae64 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth4d6396a state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth62f11e5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vetha2bd625 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vetha496039 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vetha4add91 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethb3dd86c state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethfb1c318 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 24.7 GiB (22.1%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SA400S37120 size: 111.79 GiB block-size: physical: 512 B logical: 512 B rev: SBFK scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.5 GiB size: 109.83 GiB (98.50%) used: 24.63 GiB (22.4%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 69.4 MiB (23.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 1E48-B72B Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Cygnal Integrated Products CP2102/CP2109 UART Bridge Controller [CP210x family] type: driver: cp210x interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 10c4:ea60 class-ID: 0000 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 2109:0715 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 691 lib: 236 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable Processes: CPU top: 5 of 209 1: cpu: 5.0% command: python3 pid: 4526 mem: 730.6 MiB (19.2%) 2: cpu: 0.9% command: python3 pid: 1523 mem: 118.2 MiB (3.1%) 3: cpu: 0.8% command: influxd pid: 4131 mem: 158.8 MiB (4.1%) 4: cpu: 0.6% command: [kworker/3:1-mm_percpu_wq] pid: 32096 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: pulseaudio pid: 25629 mem: 19.2 MiB (0.5%) Memory top: 5 of 209 1: mem: 730.6 MiB (19.2%) command: python3 pid: 4526 cpu: 5.0% 2: mem: 158.8 MiB (4.1%) command: influxd pid: 4131 cpu: 0.8% 3: mem: 118.2 MiB (3.1%) command: python3 pid: 1523 cpu: 0.9% 4: mem: 113.4 MiB (2.9%) command: dockerd pid: 485 cpu: 0.3% 5: mem: 106.1 MiB (2.7%) command: node pid: 30658 cpu: 0.4% Info: Processes: 209 Uptime: 1d 22h 10m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x2995f76d 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw 
           fsck.repair=yes net.ifnames=0 rootwait 
           Console: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.71 GiB used: 1.68 GiB (45.3%) 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Message: No device data found. 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835 ALSA driver: bcm2835_alsa message: bus/chip ids unavailable 
           Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth0aea054 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth29eae64 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth4d6396a state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth62f11e5 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vetha2bd625 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vetha496039 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vetha4add91 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethb3dd86c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: vethfb1c318 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 111.79 GiB used: 24.7 GiB (22.1%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SA400S37120 
           size: 111.79 GiB block-size: physical: 512 B logical: 512 B rev: SBFK 
           scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 111.5 GiB size: 109.83 GiB (98.50%) used: 24.63 GiB (22.4%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 
           ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 69.4 MiB (23.2%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 1E48-B72B 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.3:3 
           info: Cygnal Integrated Products CP2102/CP2109 UART Bridge Controller [CP210x family] 
           type:  driver: cp210x interfaces: 1 rev: 1.1 speed: 12 Mb/s 
           power: 100mA chip-ID: 10c4:ea60 class-ID: 0000 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s power: 896mA chip-ID: 2109:0715 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 691 lib: 236 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable
Processes: CPU top: 5 of 209 
           1: cpu: 5.0% command: python3 pid: 4526 mem: 730.6 MiB (19.2%) 
           2: cpu: 0.9% command: python3 pid: 1523 mem: 118.2 MiB (3.1%) 
           3: cpu: 0.8% command: influxd pid: 4131 mem: 158.8 MiB (4.1%) 
           4: cpu: 0.6% command: [kworker/3:1-mm_percpu_wq] pid: 32096 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.5% command: pulseaudio pid: 25629 mem: 19.2 MiB (0.5%) 
           Memory top: 5 of 209 
           1: mem: 730.6 MiB (19.2%) command: python3 pid: 4526 cpu: 5.0% 
           2: mem: 158.8 MiB (4.1%) command: influxd pid: 4131 cpu: 0.8% 
           3: mem: 118.2 MiB (3.1%) command: python3 pid: 1523 cpu: 0.9% 
           4: mem: 113.4 MiB (2.9%) command: dockerd pid: 485 cpu: 0.3% 
           5: mem: 106.1 MiB (2.7%) command: node pid: 30658 cpu: 0.4% 
Info:      Processes: 209 Uptime: 1d 22h 10m Init: systemd v: 241 runlevel: 5 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #44729 - Brand: Kingston A400S Series