Benchmark #44887 - pibenchmarks.com

Brand: Transcend SSD200 Series
SSD (2.5" SATA)
#272 / 1,679
57
#751 / 1,679
#724 / 984
#220 / 370
5,710
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-05-05 10:22:57
#44,887
5,138
-572 (-11.13%)
GRDfix
GRDfix

Storage Details
Transcend SSD200 Series
SSD (2.5" SATA)
128G
SSD
Transcend
TS128GSSD230S
2.5 inch
SATA
3.00
5,000
1d6b:0562
0x1d6b (Linux Foundation)
0x0562 (Netac Portable SSD Z6s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
127 MB/s
153.75 MB/s
151.26 MB/s
4,933 IOPS
4,266 IOPS
19,735 KB/s
17,066 KB/s
22,714 KB/s
17,934 KB/s
16,289 KB/s
21,159 KB/s

inxi Results
System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 video=HDMI-A-2:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0562:u console=ttyS0,115200 console=tty1 root=PARTUUID=ed514bd9-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.81 GiB used: 375 MiB (9.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev tty: 80x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.24 GiB used: 3.28 GiB (2.8%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Transcend model: TS128GSSD230S size: 119.24 GiB block-size: physical: 512 B logical: 512 B rotation: SSD rev: 0214 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.99 GiB size: 117.09 GiB (98.40%) used: 3.24 GiB (2.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 3857a514-b0f4-49ce-8430-34762068bb6f ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 8D64-2011 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c52b class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:0562 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1393 lib: 685 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 161 1: cpu: 4.1% command: init pid: 1 mem: 7.81 MiB (0.2%) 2: cpu: 1.4% command: xorg pid: 543 mem: 59.7 MiB (1.5%) 3: cpu: 1.2% command: lxpanel pid: 637 mem: 28.3 MiB (0.7%) 4: cpu: 1.2% command: pcmanfm pid: 638 mem: 24.3 MiB (0.6%) 5: cpu: 1.1% command: systemd-journald pid: 117 mem: 7.54 MiB (0.1%) Memory top: 5 of 161 1: mem: 59.7 MiB (1.5%) command: xorg pid: 543 cpu: 1.4% 2: mem: 28.3 MiB (0.7%) command: lxpanel pid: 637 cpu: 1.2% 3: mem: 27.1 MiB (0.7%) command: applet.py started by: python3 pid: 660 cpu: 1.0% 4: mem: 24.3 MiB (0.6%) command: pcmanfm pid: 638 cpu: 1.2% 5: mem: 14.0 MiB (0.3%) command: openbox pid: 635 cpu: 0.2% Info: Processes: 161 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 
           video=HDMI-A-1:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 
           video=HDMI-A-2:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0562:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=ed514bd9-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.81 GiB used: 375 MiB (9.6%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev tty: 80x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6119 hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 119.24 GiB used: 3.28 GiB (2.8%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Transcend model: TS128GSSD230S 
           size: 119.24 GiB block-size: physical: 512 B logical: 512 B rotation: SSD 
           rev: 0214 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 118.99 GiB size: 117.09 GiB (98.40%) used: 3.24 GiB (2.8%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 3857a514-b0f4-49ce-8430-34762068bb6f 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 8D64-2011 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA 
           chip-ID: 046d:c52b class-ID: 0300 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:0562 class-ID: 0806 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1393 lib: 685 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 161 
           1: cpu: 4.1% command: init pid: 1 mem: 7.81 MiB (0.2%) 
           2: cpu: 1.4% command: xorg pid: 543 mem: 59.7 MiB (1.5%) 
           3: cpu: 1.2% command: lxpanel pid: 637 mem: 28.3 MiB (0.7%) 
           4: cpu: 1.2% command: pcmanfm pid: 638 mem: 24.3 MiB (0.6%) 
           5: cpu: 1.1% command: systemd-journald pid: 117 mem: 7.54 MiB (0.1%) 
           Memory top: 5 of 161 
           1: mem: 59.7 MiB (1.5%) command: xorg pid: 543 cpu: 1.4% 
           2: mem: 28.3 MiB (0.7%) command: lxpanel pid: 637 cpu: 1.2% 
           3: mem: 27.1 MiB (0.7%) command: applet.py started by: python3 pid: 660 cpu: 1.0% 
           4: mem: 24.3 MiB (0.6%) command: pcmanfm pid: 638 cpu: 1.2% 
           5: mem: 14.0 MiB (0.3%) command: openbox pid: 635 cpu: 0.2% 
Info:      Processes: 161 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.04

Benchmark #44887 - Brand: Transcend SSD200 Series