Benchmark #45010 - pibenchmarks.com

Brand: Seagate Barracuda 120 SSD
SSD (2.5" SATA)
#399 / 1,672
24
#882 / 1,672
#840 / 983
#284 / 370
4,680
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-05-07 15:06:23
#45,010
2,653
-2,027 (-76.40%)
ASM
RPI4 4 Gb RAM OverClock 2 Gh StarTech Adapter USB 3.0 UASP 5V 3A RPI Original Power Source

Storage Details
Seagate Barracuda 120 SSD
SSD (2.5" SATA)
250G
SSD
Seagate
BarraCuda120SSDZA250CM10003
2.5 inch
SATA
2.10
480
2109:55aa
0x2109
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
2,000 (+500)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
30.5 MB/s
29.71 MB/s
29.73 MB/s
4,023 IOPS
5,881 IOPS
16,094 KB/s
23,526 KB/s
10,659 KB/s
10,120 KB/s
9,060 KB/s
11,381 KB/s

inxi Results
System: Kernel: 5.10.33-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=ab12:34cd:u console=ttyS0,115200 console=tty1 root=PARTUUID=91a707a6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: c03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.81 GiB used: 557.8 MiB (14.3%) gpu: 256 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1440 Speed: 2000 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev tty: 240x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.33-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 232.89 GiB used: 7.88 GiB (3.4%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Seagate model: BarraCuda 120 SSD ZA250CM10003 size: 232.89 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: STRSD013 temp: 26 C scheme: MBR SMART: yes state: enabled health: PASSED on: 10 hrs cycles: 51 read: 26 KiB written: 36 KiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 232.63 GiB size: 227.98 GiB (98.00%) used: 7.83 GiB (3.4%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 53f56b45-d15e-4ec1-825a-1b58174d334e ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.9 MiB (19.0%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: C75E-7F41 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip-ID: 174c:55aa class-ID: 0806 Hub-3: 1-1.4:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Device-1: 1-1.4.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 Device-2: 1-1.4.2:6 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2059 lib: 941 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 156 1: cpu: 0.8% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 906 mem: 0.00 MiB (0.0%) 2: cpu: 0.7% command: packagekitd pid: 1055 mem: 13.3 MiB (0.3%) 3: cpu: 0.6% command: init pid: 1 mem: 8.14 MiB (0.2%) 4: cpu: 0.6% command: [kworker/0:2-events] pid: 77 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: bash pid: 909 mem: 2.81 MiB (0.0%) Memory top: 5 of 156 1: mem: 45.9 MiB (1.2%) command: xorg pid: 538 cpu: 0.2% 2: mem: 30.0 MiB (0.8%) command: lxpanel pid: 679 cpu: 0.1% 3: mem: 29.3 MiB (0.8%) command: applet.py started by: python3 pid: 700 cpu: 0.1% 4: mem: 22.6 MiB (0.6%) command: pcmanfm pid: 680 cpu: 0.0% 5: mem: 15.0 MiB (0.4%) command: openbox pid: 675 cpu: 0.0% Info: Processes: 156 Uptime: 10m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3+deb10u2 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 5.10.33-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 usb-storage.quirks=ab12:34cd:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=91a707a6-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: c03114 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.81 GiB used: 557.8 MiB (14.3%) gpu: 256 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1440 
           Speed: 2000 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 
           4: 2000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev tty: 240x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.33-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: 
           hardware: no software: yes address:  
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 232.89 GiB used: 7.88 GiB (3.4%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Seagate 
           model: BarraCuda 120 SSD ZA250CM10003 size: 232.89 GiB block-size: physical: 512 B 
           logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: STRSD013 
           temp: 26 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 10 hrs cycles: 51 read: 26 KiB 
           written: 36 KiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 232.63 GiB size: 227.98 GiB (98.00%) used: 7.83 GiB (3.4%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 53f56b45-d15e-4ec1-825a-1b58174d334e 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.9 MiB (19.0%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: C75E-7F41 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.2:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip-ID: 174c:55aa class-ID: 0806 Hub-3: 1-1.4:4 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           power: 100mA chip-ID: 05e3:0610 class-ID: 0900 
           Device-1: 1-1.4.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0006 class-ID: 0300 
           Device-2: 1-1.4.2:6 info: Pixart Imaging Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA 
           chip-ID: 093a:2510 class-ID: 0301 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2059 lib: 941 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 156 
           1: cpu: 0.8% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 906 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.7% command: packagekitd pid: 1055 mem: 13.3 MiB (0.3%) 
           3: cpu: 0.6% command: init pid: 1 mem: 8.14 MiB (0.2%) 
           4: cpu: 0.6% command: [kworker/0:2-events] pid: 77 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.5% command: bash pid: 909 mem: 2.81 MiB (0.0%) 
           Memory top: 5 of 156 
           1: mem: 45.9 MiB (1.2%) command: xorg pid: 538 cpu: 0.2% 
           2: mem: 30.0 MiB (0.8%) command: lxpanel pid: 679 cpu: 0.1% 
           3: mem: 29.3 MiB (0.8%) command: applet.py started by: python3 pid: 700 cpu: 0.1% 
           4: mem: 22.6 MiB (0.6%) command: pcmanfm pid: 680 cpu: 0.0% 
           5: mem: 15.0 MiB (0.4%) command: openbox pid: 675 cpu: 0.0% 
Info:      Processes: 156 Uptime: 10m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3+deb10u2 
           Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #45010 - Brand: Seagate Barracuda 120 SSD