Benchmark #45481 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC16G)
A1 C10 U1
#7 / 1,539
884
#1,218 / 1,539
#202 / 369
1,084
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-05-13 00:01:16
#45,481
1,189
+105 (+8.83%)
Old6Fitty
sdcard

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC16G)
A1 C10 U1
14.6G
SD
SanDisk
SC16G
SDHC
5.00
0x03
SD
8.0
10/2020
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
21.6 MB/s
41.11 MB/s
38.13 MB/s
708 IOPS
3,081 IOPS
2,833 KB/s
12,326 KB/s
10,230 KB/s
3,813 KB/s
10,171 KB/s
2,330 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1280x720M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=02711bfc-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.85 GiB used: 887.5 MiB (11.0%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") s-diag: 338mm (13.3") Monitor-1: HDMI-1 res: 1024x768 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:soc class-ID: audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k4.19.118-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-019126707fbb state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-6f9d7957ddd1 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-4: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-5: veth4deb377 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth53a2966 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth6323edc state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethb4a5abe state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethf75f816 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: bcm2835-pl011 driver: uart_pl011 bus-ID: N/A chip-ID: brcm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 253.31 GiB used: 16.05 GiB (6.3%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC16G size: 14.84 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: A-Data model: SU800NS38 size: 238.47 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: 02K0S86E temp: 34 C scheme: MBR SMART: yes state: enabled health: PASSED on: 21 hrs cycles: 16 read: 2.8 MiB written: 3.1 MiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 14.58 GiB size: 14.3 GiB (98.02%) used: 8.21 GiB (57.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 3857a514-b0f4-49ce-8430-34762068bb6f ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 51.2 MiB (20.3%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 8D64-2011 ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 51.8 MiB (20.6%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 8D64-2011 ID-4: /media/pi/rootfs raw-size: 238.22 GiB size: 233.48 GiB (98.01%) used: 7.74 GiB (3.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 3857a514-b0f4-49ce-8430-34762068bb6f Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1426 lib: 696 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 209 1: cpu: 97.9% command: power-monitor.py started by: python3.7 pid: 2676 mem: 52.1 MiB (0.6%) 2: cpu: 16.6% command: [spi0] pid: 209 mem: 0.00 MiB (0.0%) 3: cpu: 10.6% command: influxd pid: 1591 mem: 231.0 MiB (2.8%) 4: cpu: 5.6% command: node pid: 2720 mem: 58.0 MiB (0.7%) 5: cpu: 3.6% command: docker-proxy pid: 1237 mem: 7.58 MiB (0.0%) Memory top: 5 of 209 1: mem: 231.0 MiB (2.8%) command: influxd pid: 1591 cpu: 10.6% 2: mem: 84.2 MiB (1.0%) command: node-red pid: 2390 cpu: 1.6% 3: mem: 70.7 MiB (0.8%) command: dockerd pid: 610 cpu: 0.7% 4: mem: 58.0 MiB (0.7%) command: node pid: 2720 cpu: 5.6% 5: mem: 52.1 MiB (0.6%) command: power-monitor.py started by: python3.7 pid: 2676 cpu: 97.9% Info: Processes: 209 Uptime: 17h 41m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1280x720M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=02711bfc-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.85 GiB used: 887.5 MiB (11.0%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc 
           class-ID: gpu 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") 
           s-diag: 338mm (13.3") 
           Monitor-1: HDMI-1 res: 1024x768 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:soc 
           class-ID: audio 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k4.19.118-v7l+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: br-019126707fbb state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: br-6f9d7957ddd1 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-4: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-5: veth4deb377 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth53a2966 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth6323edc state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethb4a5abe state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethf75f816 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: bcm2835-pl011 driver: uart_pl011 bus-ID: N/A chip-ID: brcm:fe201000 
           class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6119 hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 253.31 GiB used: 16.05 GiB (6.3%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC16G size: 14.84 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: A-Data model: SU800NS38 size: 238.47 GiB 
           block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD 
           rev: 02K0S86E temp: 34 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 21 hrs cycles: 16 read: 2.8 MiB 
           written: 3.1 MiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 14.58 GiB size: 14.3 GiB (98.02%) used: 8.21 GiB (57.4%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs 
           uuid: 3857a514-b0f4-49ce-8430-34762068bb6f 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 51.2 MiB (20.3%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 8D64-2011 
           ID-3: /media/pi/boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 51.8 MiB (20.6%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 8D64-2011 
           ID-4: /media/pi/rootfs raw-size: 238.22 GiB size: 233.48 GiB (98.01%) 
           used: 7.74 GiB (3.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 
           label: rootfs uuid: 3857a514-b0f4-49ce-8430-34762068bb6f 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1426 lib: 696 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 209 
           1: cpu: 97.9% command: power-monitor.py started by: python3.7 pid: 2676 
           mem: 52.1 MiB (0.6%) 
           2: cpu: 16.6% command: [spi0] pid: 209 mem: 0.00 MiB (0.0%) 
           3: cpu: 10.6% command: influxd pid: 1591 mem: 231.0 MiB (2.8%) 
           4: cpu: 5.6% command: node pid: 2720 mem: 58.0 MiB (0.7%) 
           5: cpu: 3.6% command: docker-proxy pid: 1237 mem: 7.58 MiB (0.0%) 
           Memory top: 5 of 209 
           1: mem: 231.0 MiB (2.8%) command: influxd pid: 1591 cpu: 10.6% 
           2: mem: 84.2 MiB (1.0%) command: node-red pid: 2390 cpu: 1.6% 
           3: mem: 70.7 MiB (0.8%) command: dockerd pid: 610 cpu: 0.7% 
           4: mem: 58.0 MiB (0.7%) command: node pid: 2720 cpu: 5.6% 
           5: mem: 52.1 MiB (0.6%) command: power-monitor.py started by: python3.7 pid: 2676 
           cpu: 97.9% 
Info:      Processes: 209 Uptime: 17h 41m Init: systemd v: 241 runlevel: 5 
           target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #45481 - Brand: SanDisk SD Ultra A1 (SC16G)