Benchmark #45496 - pibenchmarks.com

Brand: Winkom ML-XL8240 2.5" SSD
SSD (2.5" SATA)
#1,312 / 1,665
1
#715 / 1,665
#692 / 977
#206 / 370
5,792

Overview
2021-05-13 12:39:06
#45,496
5,792
0 (0.00%)
pi

Storage Details
Winkom ML-XL8240 2.5" SSD
SSD (2.5" SATA)
240G
SSD
Winkom
ML-XL8240
SATA
1f75:0611
0x1f75 (Innostor Technology Corporation)
0x0611 (AlDiga AL-11U Quad-band GSM/GPRS/EDGE modem)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
20.3 MB/s
90.05 MB/s
89.12 MB/s
1,327 IOPS
10,711 IOPS
5,311 KB/s
42,845 KB/s
54,707 KB/s
19,650 KB/s
54,368 KB/s
21,087 KB/s

inxi Results
System: Host: raspi01 Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1680x1050M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=3530332a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.81 GiB used: 881.6 MiB (22.6%) gpu: 220 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.5x10.9") s-diag: 523mm (20.6") Monitor-1: HDMI-1 res: 1680x1050 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd00::faee:fdf2:9c42:fbe4/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2002:95ac:619d:0:accd:652c:1635:6add/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: 2002:25d1:1c41:0:445e:fa52:356e:1d6/128 type: noprefixroute scope: global IP v6: fe80::54bc:e5ff:d8d:de91/64 scope: link WAN IP: 149.172.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: XX:XX:XX:XX:XX:XX Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Use of uninitialized value in string ne at ./inxi line 10735. Drives: Local Storage: total: 1.13 TiB used: 35.35 GiB (3.1%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD My Passport 0740 drive model: WD10TMVW-11ZSMS5 family: Elements / My Passport (USB, AF) size: 931.48 GiB block-size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 5200 rpm drive WD-WXP1A7167815 rev: 1007 drive rev: 01.01A01 temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 131d 4h cycles: 894 ID-2: /dev/sdb maj-min: 8:16 type: USB model: Winkom M L-XL8240 size: 223.57 GiB block-size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: SSD drive rev: 2.52 temp: 30 C scheme: MBR SMART: yes state: enabled health: PASSED on: 4y 338d 11h cycles: 332 read: 3.9 MiB written: 24.8 MiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 931.23 GiB size: 915.61 GiB (98.32%) used: 26.3 GiB (2.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/Pagefile raw-size: 223.57 GiB size: 223.57 GiB (100.00%) used: 9.01 GiB (4.0%) fs: ntfs block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: Pagefile uuid: FC9C3A6C9C3A2196 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Western Digital My Passport Essential (WDBACY) type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 1058:0740 class-ID: 0806 Device-2: 2-2:3 info: Innostor type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 800mA chip-ID: 1f75:0611 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2125 lib: 974 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 190 1: cpu: 2.1% command: lxtask pid: 9575 mem: 20.5 MiB (0.5%) 2: cpu: 2.0% command: xorg pid: 769 mem: 78.9 MiB (2.1%) 3: cpu: 1.8% command: apache2 pid: 1208 mem: 62.2 MiB (1.6%) 4: cpu: 1.7% command: apache2 pid: 913 mem: 65.6 MiB (1.7%) 5: cpu: 1.4% command: apache2 pid: 9969 mem: 45.4 MiB (1.2%) Memory top: 5 of 190 1: mem: 112.3 MiB (3.0%) command: mysqld pid: 615 cpu: 0.5% 2: mem: 78.9 MiB (2.1%) command: xorg pid: 769 cpu: 2.0% 3: mem: 65.6 MiB (1.7%) command: apache2 pid: 913 cpu: 1.7% 4: mem: 64.9 MiB (1.7%) command: apache2 pid: 1557 cpu: 1.1% 5: mem: 63.4 MiB (1.7%) command: apache2 pid: 2062 cpu: 1.1% Info: Processes: 190 Uptime: 1h 11m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: Storage.sh inxi: 3.3.04

inxi Results

System:    Host: raspi01 Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           video=HDMI-A-1:1680x1050M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=3530332a-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.81 GiB used: 881.6 MiB (22.6%) gpu: 220 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 
           stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.5x10.9") s-diag: 523mm (20.6") 
           Monitor-1: HDMI-1 res: 1680x1050 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 
           class-ID: mmcnr 
           IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 
           class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fd00::faee:fdf2:9c42:fbe4/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: 2002:95ac:619d:0:accd:652c:1635:6add/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: 2002:25d1:1c41:0:445e:fa52:356e:1d6/128 type: noprefixroute scope: global 
           IP v6: fe80::54bc:e5ff:d8d:de91/64 scope: link 
           WAN IP: 149.172.X.X 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no 
           software: yes address: XX:XX:XX:XX:XX:XX 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Use of uninitialized value in string ne at ./inxi line 10735.
Drives:    Local Storage: total: 1.13 TiB used: 35.35 GiB (3.1%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD My Passport 0740 
           drive model: WD10TMVW-11ZSMS5 family: Elements / My Passport (USB, AF) size: 931.48 GiB block-size: 
           physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rotation: 5200 rpm 
           drive WD-WXP1A7167815 rev: 1007 drive rev: 01.01A01 temp: 33 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 131d 4h cycles: 894 
           ID-2: /dev/sdb maj-min: 8:16 type: USB model: Winkom M L-XL8240 size: 223.57 GiB block-size: 
           physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s rotation: SSD 
           drive rev: 2.52 temp: 30 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 4y 338d 11h cycles: 332 read: 3.9 MiB written: 24.8 MiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 931.23 GiB size: 915.61 GiB (98.32%) used: 26.3 GiB (2.9%) fs: ext4 block-size: 4096 B 
           dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B 
           dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/Pagefile raw-size: 223.57 GiB size: 223.57 GiB (100.00%) used: 9.01 GiB (4.0%) fs: ntfs 
           block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: Pagefile uuid: FC9C3A6C9C3A2196 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 
           class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 
           class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 
           class-ID: 0900 
           Device-1: 2-1:2 info: Western Digital My Passport Essential (WDBACY) type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 1058:0740 class-ID: 0806            Device-2: 2-2:3 info: Innostor type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
           speed: 5 Gb/s power: 800mA chip-ID: 1f75:0611 class-ID: 0806 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2125 lib: 974 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 190 
           1: cpu: 2.1% command: lxtask pid: 9575 mem: 20.5 MiB (0.5%) 
           2: cpu: 2.0% command: xorg pid: 769 mem: 78.9 MiB (2.1%) 
           3: cpu: 1.8% command: apache2 pid: 1208 mem: 62.2 MiB (1.6%) 
           4: cpu: 1.7% command: apache2 pid: 913 mem: 65.6 MiB (1.7%) 
           5: cpu: 1.4% command: apache2 pid: 9969 mem: 45.4 MiB (1.2%) 
           Memory top: 5 of 190 
           1: mem: 112.3 MiB (3.0%) command: mysqld pid: 615 cpu: 0.5% 
           2: mem: 78.9 MiB (2.1%) command: xorg pid: 769 cpu: 2.0% 
           3: mem: 65.6 MiB (1.7%) command: apache2 pid: 913 cpu: 1.7% 
           4: mem: 64.9 MiB (1.7%) command: apache2 pid: 1557 cpu: 1.1% 
           5: mem: 63.4 MiB (1.7%) command: apache2 pid: 2062 cpu: 1.1% 
Info:      Processes: 190 Uptime: 1h 11m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: Storage.sh 
           inxi: 3.3.04

Benchmark #45496 - Brand: Winkom ML-XL8240 2.5" SSD