Benchmark #4585 - pibenchmarks.com

Brand: Toshiba Canvio 2.5" MK Series
HDD (2.5" SATA)
#244 / 1,665
55
#1,358 / 1,665
#56 / 67
#17 / 20
1,078
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-02 21:41:43
#4,585
1,715
+637 (+37.14%)
jchambers
Dell

Storage Details
Toshiba Canvio 2.5" MK Series
HDD (2.5" SATA)
250
HDD
Toshiba
MK2576GSX
2.5 inch
SATA
5,400
None

System Board Details
		Amazon.com AliExpress
Dell OptiPlex 7010
OptiPlex 7010
Dell
3,600
0MN1TX
1,600

Operating System

Ubuntu 18.04.3 LTS
x86_64

Benchmark Results
70.5 MB/s
62.44 MB/s
55.51 MB/s
209 IOPS
352 IOPS
839 KB/s
1,408 KB/s
42,704 KB/s
42,605 KB/s
492 KB/s
914 KB/s

inxi Results
System: Host: jamesminer11 Kernel: 4.15.0-70-generic x86_64 bits: 64 compiler: gcc v: 7.4.0 parameters: BOOT_IMAGE=/boot/vmlinuz-4.15.0-70-generic root=UUID=e86984b1-6551-404a-a5ec-0d3f1f6211af ro intel_pstate=enable nopti kpti=off no_rfi_flush noibrs noibpb spectre_v2=off spec_store_bypass_disable=prctl nospec nogmb spec_store_bypass_disable=off nospec_store_bypass_disable Console: tty 1 dm: N/A Distro: Ubuntu 18.04.3 LTS (Bionic Beaver) Machine: Type: Laptop System: Dell product: OptiPlex 7010 v: 01 Chassis: type: 16 Mobo: Dell model: 0MN1TX v: A02 UEFI: Dell v: A15 date: 08/12/2013 Memory: RAM: total: 7.68 GiB used: 2.78 GiB (36.2%) Array-1: capacity: 16 GiB slots: 2 EC: None max module size: 8 GiB note: est. Device-1: DIMM1 size: 4 GiB speed: 1600 MT/s type: DDR3 detail: synchronous bus width: 64 bits total: 64 bits manufacturer: Samsung part-no: M378B5173DB0-CK0 Device-2: DIMM2 size: 4 GiB speed: 1600 MT/s type: DDR3 detail: synchronous bus width: 64 bits total: 64 bits manufacturer: Samsung part-no: M378B5173DB0-CK0 Slots: Message: No PCI slot data found. CPU: Topology: Quad Core model: Intel Core i5-3470S bits: 64 type: MCP arch: Ivy Bridge family: 6 model-id: 3A (58) stepping: 9 microcode: 21 L1 cache: 256 KiB L2 cache: 6144 KiB L3 cache: 6144 KiB bogomips: 23146 Speed: 3291 MHz min/max: 1600/3600 MHz Core speeds (MHz): 1: 3289 2: 3290 3: 3290 4: 3193 Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept erms est f16c flexpriority flush_l1d fpu fsgsbase fxsr ht ibpb ibrs ida lahf_lm lm mca mce md_clear mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pts rdrand rdtscp rep_good sep smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt xtopology xtpr Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable Type: l1tf mitigation: PTE Inversion Type: mds mitigation: Clear CPU buffers! SMT disabled Type: meltdown status: Vulnerable Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 status: Vulnerable, IBPB: disabled, STIBP: disabled Type: tsx_async_abort status: Not affected Graphics: Device-1: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0152 Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Message: No Device data found. Network: Device-1: Intel 82579LM Gigabit Network vendor: Dell driver: e1000e v: 3.2.6-k port: f080 bus ID: 00:19.0 chip ID: 8086:1502 IF: eno1 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 232.89 GiB used: 3.75 GiB (1.6%) ID-1: /dev/sda vendor: Toshiba model: MK2576GSX size: 232.89 GiB block size: physical: 512 B logical: 512 B speed: 3.0 Gb/s rotation: 5400 rpm rev: 2D scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 231.43 GiB size: 227.67 GiB (98.38%) used: 3.75 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: e86984b1-6551-404a-a5ec-0d3f1f6211af ID-2: /boot/efi raw size: 512.0 MiB size: 511.0 MiB (99.80%) used: 6.0 MiB (1.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 1CC0-2DD3 ID-3: swap-1 size: 977.0 MiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda3 label: N/A uuid: 46b52762-2751-4bbc-bfb4-ceda312895c3 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip ID: 8087:0024 Hub: 2-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 8087:0024 Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //us.archive.ubuntu.com/ubuntu/ bionic main restricted 2: deb http: //us.archive.ubuntu.com/ubuntu/ bionic-updates main restricted 3: deb http: //us.archive.ubuntu.com/ubuntu/ bionic universe 4: deb http: //us.archive.ubuntu.com/ubuntu/ bionic-updates universe 5: deb http: //us.archive.ubuntu.com/ubuntu/ bionic multiverse 6: deb http: //us.archive.ubuntu.com/ubuntu/ bionic-updates multiverse 7: deb http: //us.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse 8: deb http: //security.ubuntu.com/ubuntu bionic-security main restricted 9: deb http: //security.ubuntu.com/ubuntu bionic-security universe 10: deb http: //security.ubuntu.com/ubuntu bionic-security multiverse Processes: CPU top: 5 1: cpu: 299% command: ./xmr-stak-rx pid: 1702 mem: 2091.8 MiB (26.6%) 2: cpu: 0.1% command: [kworker/3:3] pid: 9674 mem: 0.00 MiB (0.0%) 3: cpu: 0.0% command: init pid: 1 mem: 8.80 MiB (0.1%) 4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 5: cpu: 0.0% command: [kworker/0:0h] pid: 4 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 2091.8 MiB (26.6%) command: ./xmr-stak-rx pid: 1702 cpu: 299% 2: mem: 19.7 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3 pid: 1619 cpu: 0.0% 3: mem: 16.8 MiB (0.2%) command: networkd-dispatcher started by: python3 pid: 1069 cpu: 0.0% 4: mem: 15.8 MiB (0.2%) command: networkmanager pid: 1047 cpu: 0.0% 5: mem: 15.3 MiB (0.1%) command: systemd-journald pid: 440 cpu: 0.0% Info: Processes: 131 Uptime: 1d 2h 32m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 alt: 5/7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

inxi Results

System:    Host: jamesminer11 Kernel: 4.15.0-70-generic x86_64 bits: 64 compiler: gcc v: 7.4.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.15.0-70-generic 
           root=UUID=e86984b1-6551-404a-a5ec-0d3f1f6211af ro intel_pstate=enable nopti kpti=off 
           no_rfi_flush noibrs noibpb spectre_v2=off spec_store_bypass_disable=prctl nospec nogmb 
           spec_store_bypass_disable=off nospec_store_bypass_disable 
           Console: tty 1 dm: N/A Distro: Ubuntu 18.04.3 LTS (Bionic Beaver) 
Machine:   Type: Laptop System: Dell product: OptiPlex 7010 v: 01 Chassis: 
           type: 16 Mobo: Dell model: 0MN1TX v: A02 UEFI: Dell v: A15 date: 08/12/2013 
Memory:    RAM: total: 7.68 GiB used: 2.78 GiB (36.2%) 
           Array-1: capacity: 16 GiB slots: 2 EC: None max module size: 8 GiB note: est. 
           Device-1: DIMM1 size: 4 GiB speed: 1600 MT/s type: DDR3 detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: Samsung part-no: M378B5173DB0-CK0 
           Device-2: DIMM2 size: 4 GiB speed: 1600 MT/s type: DDR3 detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: Samsung part-no: M378B5173DB0-CK0 
           Slots: Message: No PCI slot data found. 
CPU:       Topology: Quad Core model: Intel Core i5-3470S bits: 64 type: MCP arch: Ivy Bridge 
           family: 6 model-id: 3A (58) stepping: 9 microcode: 21 L1 cache: 256 KiB 
           L2 cache: 6144 KiB L3 cache: 6144 KiB bogomips: 23146 
           Speed: 3291 MHz min/max: 1600/3600 MHz Core speeds (MHz): 1: 3289 2: 3290 3: 3290 
           4: 3193 
           Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov constant_tsc 
           cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept erms est f16c 
           flexpriority flush_l1d fpu fsgsbase fxsr ht ibpb ibrs ida lahf_lm lm mca mce md_clear 
           mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pebs pge pln 
           pni popcnt pse pse36 pts rdrand rdtscp rep_good sep smep smx ss ssbd sse sse2 sse4_1 
           sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid 
           x2apic xsave xsaveopt xtopology xtpr 
           Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds mitigation: Clear CPU buffers! SMT disabled 
           Type: meltdown status: Vulnerable 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable, IBPB: disabled, STIBP: disabled 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics vendor: Dell 
           driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0152 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Message: No Device data found. 
Network:   Device-1: Intel 82579LM Gigabit Network vendor: Dell driver: e1000e v: 3.2.6-k 
           port: f080 bus ID: 00:19.0 chip ID: 8086:1502 
           IF: eno1 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 232.89 GiB used: 3.75 GiB (1.6%) 
           ID-1: /dev/sda vendor: Toshiba model: MK2576GSX size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 3.0 Gb/s rotation: 5400 rpm rev: 2D scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 231.43 GiB size: 227.67 GiB (98.38%) used: 3.75 GiB (1.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: e86984b1-6551-404a-a5ec-0d3f1f6211af 
           ID-2: /boot/efi raw size: 512.0 MiB size: 511.0 MiB (99.80%) used: 6.0 MiB (1.2%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: N/A uuid: 1CC0-2DD3 
           ID-3: swap-1 size: 977.0 MiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sda3 label: N/A 
           uuid: 46b52762-2751-4bbc-bfb4-ceda312895c3 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 speed: 480 Mb/s 
           chip ID: 8087:0024 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 speed: 480 Mb/s 
           chip ID: 8087:0024 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //us.archive.ubuntu.com/ubuntu/ bionic main restricted
           2: deb http: //us.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
           3: deb http: //us.archive.ubuntu.com/ubuntu/ bionic universe
           4: deb http: //us.archive.ubuntu.com/ubuntu/ bionic-updates universe
           5: deb http: //us.archive.ubuntu.com/ubuntu/ bionic multiverse
           6: deb http: //us.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
           7: deb http: //us.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
           8: deb http: //security.ubuntu.com/ubuntu bionic-security main restricted
           9: deb http: //security.ubuntu.com/ubuntu bionic-security universe
           10: deb http: //security.ubuntu.com/ubuntu bionic-security multiverse
Processes: CPU top: 5 
           1: cpu: 299% command: ./xmr-stak-rx pid: 1702 mem: 2091.8 MiB (26.6%) 
           2: cpu: 0.1% command: [kworker/3:3] pid: 9674 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.0% command: init pid: 1 mem: 8.80 MiB (0.1%) 
           4: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.0% command: [kworker/0:0h] pid: 4 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 2091.8 MiB (26.6%) command: ./xmr-stak-rx pid: 1702 cpu: 299% 
           2: mem: 19.7 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1619 cpu: 0.0% 
           3: mem: 16.8 MiB (0.2%) command: networkd-dispatcher started by: python3 pid: 1069 
           cpu: 0.0% 
           4: mem: 15.8 MiB (0.2%) command: networkmanager pid: 1047 cpu: 0.0% 
           5: mem: 15.3 MiB (0.1%) command: systemd-journald pid: 440 cpu: 0.0% 
Info:      Processes: 131 Uptime: 1d 2h 32m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 
           alt: 5/7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

Benchmark #4585 - Brand: Toshiba Canvio 2.5" MK Series