Benchmark #4591 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,701
935
#437 / 1,701
#421 / 990
#53 / 370
7,565
	Amazon.com AliExpress

Overview
2019-12-03 01:29:50
#4,591
5,560
-2,005 (-36.06%)
Anonymous
Crucial P1 M.2 2280 512Gb NVme USB 3.1 UASP on Pi 4

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
SSD
JMicron
JMicronTech
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
189 MB/s
8,224 IOPS
16,176 IOPS
32,899 KB/s
64,707 KB/s
13,681 KB/s
13,797 KB/s
11,842 KB/s
14,073 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=UUID=f307a985-88e3-47d9-b269-49c52d4f2d91 rootfstype=btrfs rootflags=subvol=/@raspbian elevator=deadline fsck.repair=yes rootwait splash plymouth.ignore-serial-consoles audit=0 quiet Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 484.8 MiB (24.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr tty: 117x56 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-c567d6b03a53 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-4: veth12497d9 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth9f62b1b state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 525.24 GiB used: 82.49 GiB (15.7%) ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 0204 scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 64.00 GiB size: 64.00 GiB (100.00%) used: 16.33 GiB (25.5%) fs: btrfs block size: 4096 B dev: /dev/sda5 label: rpilinux uuid: f307a985-88e3-47d9-b269-49c52d4f2d91 ID-2: /.snapshots raw size: 64.00 GiB size: 64.00 GiB (100.00%) used: 16.33 GiB (25.5%) fs: btrfs block size: 4096 B dev: /dev/sda5 label: rpilinux uuid: f307a985-88e3-47d9-b269-49c52d4f2d91 ID-3: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 106.5 MiB (42.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B ID-4: /media/pi/DATA_USB raw size: 64.00 GiB size: 63.98 GiB (99.98%) used: 4.2 MiB (0.0%) fs: vfat block size: 512 B dev: /dev/sda4 label: DATA_USB uuid: DFC1-B3F2 ID-5: /media/pi/linuxusb raw size: 98.69 GiB size: 98.69 GiB (100.00%) used: 49.73 GiB (50.4%) fs: btrfs block size: 4096 B dev: /dev/sda2 label: linuxusb uuid: 5d97b8e0-a524-4e4d-bb2c-2bbf74b69ad9 ID-6: /var/lib/docker/overlay2/0d174ae1c60f3131d7b3fe85dcf38ec8e32ca38de836ab3bf83a9324c341d12e/merged raw size: N/A size: 64.00 GiB used: 16.33 GiB (25.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/b8718ec2c4570624843edbc68810ccecf4b8351ce3a213e888a8459de001ecca/merged raw size: N/A size: 64.00 GiB used: 16.33 GiB (25.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: EFI uuid: A419-7DDE ID-2: /dev/sda3 size: 64.00 GiB fs: crypto_luks label: N/A uuid: 8e7c706b-dc48-4eec-bfa9-b0833b733624 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.4.2:4 info: Microsoft Comfort Curve Keyboard 2000 V1.0 type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:00dd Device-2: 1-1.4.3:5 info: Logitech Unifying Receiver type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c534 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0562 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/zerotier.list 1: deb http: //download.zerotier.com/debian/buster buster main Processes: CPU top: 5 1: cpu: 3.6% command: syncthing pid: 536 mem: 50.5 MiB (2.6%) 2: cpu: 3.0% command: init pid: 1 mem: 8.32 MiB (0.4%) 3: cpu: 2.5% command: [kworker/u8:10-btrfs-delalloc] pid: 2061 mem: 0.00 MiB (0.0%) 4: cpu: 2.4% command: xorg pid: 615 mem: 47.7 MiB (2.4%) 5: cpu: 2.2% command: [kworker/u8:12-btrfs-submit] pid: 2064 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 73.0 MiB (3.7%) command: hp-systray started by: python3 pid: 1075 cpu: 0.6% 2: mem: 61.5 MiB (3.1%) command: dockerd pid: 546 cpu: 1.1% 3: mem: 50.5 MiB (2.6%) command: syncthing pid: 536 cpu: 3.6% 4: mem: 47.7 MiB (2.4%) command: xorg pid: 615 cpu: 2.4% 5: mem: 32.3 MiB (1.6%) command: containerd pid: 543 cpu: 0.3% Info: Processes: 240 Uptime: 3m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=UUID=f307a985-88e3-47d9-b269-49c52d4f2d91 rootfstype=btrfs 
           rootflags=subvol=/@raspbian elevator=deadline fsck.repair=yes rootwait splash 
           plymouth.ignore-serial-consoles audit=0 quiet 
           Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 484.8 MiB (24.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           tty: 117x56 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-c567d6b03a53 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth12497d9 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth9f62b1b state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 525.24 GiB used: 82.49 GiB (15.7%) 
           ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 465.76 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0204 scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 64.00 GiB size: 64.00 GiB (100.00%) used: 16.33 GiB (25.5%) fs: btrfs 
           block size: 4096 B dev: /dev/sda5 label: rpilinux 
           uuid: f307a985-88e3-47d9-b269-49c52d4f2d91 
           ID-2: /.snapshots raw size: 64.00 GiB size: 64.00 GiB (100.00%) used: 16.33 GiB (25.5%) 
           fs: btrfs block size: 4096 B dev: /dev/sda5 label: rpilinux 
           uuid: f307a985-88e3-47d9-b269-49c52d4f2d91 
           ID-3: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 106.5 MiB (42.2%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
           ID-4: /media/pi/DATA_USB raw size: 64.00 GiB size: 63.98 GiB (99.98%) 
           used: 4.2 MiB (0.0%) fs: vfat block size: 512 B dev: /dev/sda4 label: DATA_USB 
           uuid: DFC1-B3F2 
           ID-5: /media/pi/linuxusb raw size: 98.69 GiB size: 98.69 GiB (100.00%) 
           used: 49.73 GiB (50.4%) fs: btrfs block size: 4096 B dev: /dev/sda2 label: linuxusb 
           uuid: 5d97b8e0-a524-4e4d-bb2c-2bbf74b69ad9 
           ID-6: /var/lib/docker/overlay2/0d174ae1c60f3131d7b3fe85dcf38ec8e32ca38de836ab3bf83a9324c341d12e/merged raw size: N/A size: 64.00 GiB used: 16.33 GiB (25.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/b8718ec2c4570624843edbc68810ccecf4b8351ce3a213e888a8459de001ecca/merged raw size: N/A size: 64.00 GiB used: 16.33 GiB (25.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: EFI uuid: A419-7DDE 
           ID-2: /dev/sda3 size: 64.00 GiB fs: crypto_luks label: N/A 
           uuid: 8e7c706b-dc48-4eec-bfa9-b0833b733624 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.4.2:4 info: Microsoft Comfort Curve Keyboard 2000 V1.0 type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 045e:00dd 
           Device-2: 1-1.4.3:5 info: Logitech Unifying Receiver type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c534 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0562 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/zerotier.list 
           1: deb http: //download.zerotier.com/debian/buster buster main
Processes: CPU top: 5 
           1: cpu: 3.6% command: syncthing pid: 536 mem: 50.5 MiB (2.6%) 
           2: cpu: 3.0% command: init pid: 1 mem: 8.32 MiB (0.4%) 
           3: cpu: 2.5% command: [kworker/u8:10-btrfs-delalloc] pid: 2061 mem: 0.00 MiB (0.0%) 
           4: cpu: 2.4% command: xorg pid: 615 mem: 47.7 MiB (2.4%) 
           5: cpu: 2.2% command: [kworker/u8:12-btrfs-submit] pid: 2064 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 73.0 MiB (3.7%) command: hp-systray started by: python3 pid: 1075 cpu: 0.6% 
           2: mem: 61.5 MiB (3.1%) command: dockerd pid: 546 cpu: 1.1% 
           3: mem: 50.5 MiB (2.6%) command: syncthing pid: 536 cpu: 3.6% 
           4: mem: 47.7 MiB (2.4%) command: xorg pid: 615 cpu: 2.4% 
           5: mem: 32.3 MiB (1.6%) command: containerd pid: 543 cpu: 0.3% 
Info:      Processes: 240 Uptime: 3m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #4591 - Brand: Undentified JMicron USB to SATA Adapter