Benchmark #46153 - pibenchmarks.com

Brand: Samsung 850 EVO
SSD (2.5" SATA)
#17 / 1,539
561
#444 / 1,539
#426 / 875
#97 / 363
6,521
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-05-28 12:54:14
#46,153
5,280
-1,241 (-23.50%)
flashcool

Storage Details
Samsung 850 EVO
SSD (2.5" SATA)
250G
SSD
Samsung
SSD850EVO250GB
2.5 inch
SATA
3.00
5,000
05e3:0731
0x05e3
0x0731 (GL3310 SATA 3Gb/s Bridge Controller)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
123 MB/s
119.03 MB/s
124.86 MB/s
4,992 IOPS
3,667 IOPS
19,970 KB/s
14,670 KB/s
17,879 KB/s
15,261 KB/s
18,924 KB/s
22,865 KB/s

inxi Results
System: Host: rpi4.emmanouilidistech.site Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=bfbfc3bc-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty pts/0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.81 GiB used: 376.3 MiB (9.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v4: 192.168.X.X/24 virtual: secondary scope: global broadcast: 192.168.X.X IP v6: 2a02:2149:a001:e00::2/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::dea6:32ff:fe45:691a/64 scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: 10.9.X.X/24 scope: global broadcast: 10.9.X.X IP v6: 2a02:2149:a001:e11::1/64 scope: global IP v6: fe80::c1d3:91a0:cf55:4934/64 virtual: stable-privacy scope: link IF-ID-2: tun1 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: 10.8.X.X/24 scope: global broadcast: 10.8.X.X IP v6: 2a02:2149:a001:e10::1/64 scope: global IP v6: fe80::a3fe:6f45:71bb:c1e/64 virtual: stable-privacy scope: link WAN IP: 194.219.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 262.61 GiB used: 135.65 GiB (51.7%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Silicon Motion model: SM32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB model: 05e3 U3 Hard Drive drive model: SSD 850 EVO 250GB family: based SSDs size: 232.89 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: SSD drive rev: 9072 drive rev: EMT02B6Q temp: 37 C scheme: GPT SMART: yes state: enabled health: PASSED on: 3y 117d 17h cycles: 1838 written: 24.11 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.47 GiB size: 28.95 GiB (98.25%) used: 6.62 GiB (22.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 3a324232-335f-4617-84c3-d4889840dc93 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 6284-658D ID-3: /mnt/Evo raw-size: 232.88 GiB size: 228.23 GiB (98.00%) used: 128.98 GiB (56.5%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 5116808a-333b-415f-b3a4-574d60f4a2d6 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: Genesys Logic GL3310 SATA 3Gb/s Bridge Controller type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 256mA chip-ID: 05e3:0731 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: 1519 apt: 1513 lib: 727 snap: 6 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https://deb.nodesource.com/node_15.x buster main 2: deb-src https://deb.nodesource.com/node_15.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/speedtest.list 1: deb https://ookla.bintray.com/debian generic main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 398 1: cpu: 0.5% command: bash pid: 25879 mem: 2.79 MiB (0.0%) 2: cpu: 0.3% command: expressvpnd pid: 682 mem: 43.3 MiB (1.1%) 3: cpu: 0.3% command: pihole-ftl pid: 1169 mem: 11.5 MiB (0.3%) 4: cpu: 0.2% command: snmpd pid: 630 mem: 5.14 MiB (0.1%) 5: cpu: 0.2% command: -bash pid: 24317 mem: 3.79 MiB (0.0%) Memory top: 5 of 398 1: mem: 43.3 MiB (1.1%) command: expressvpnd pid: 682 cpu: 0.3% 2: mem: 19.8 MiB (0.5%) command: snapd pid: 395 cpu: 0.0% 3: mem: 17.2 MiB (0.4%) command: php-fpm: pid: 487 cpu: 0.0% 4: mem: 16.6 MiB (0.4%) command: php-fpm: pid: 545 cpu: 0.0% 5: mem: 16.3 MiB (0.4%) command: php-fpm: pid: 544 cpu: 0.0% Info: Processes: 398 Uptime: 1d 20h 51m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: tty pts/0 (SSH) inxi: 3.3.04

inxi Results

System:
  Host: rpi4.emmanouilidistech.site Kernel: 5.10.17-v7l+ armv7l bits: 32 
  compiler: N/A 
  parameters: coherent_pool=1M 8250.nr_uarts=0 
  snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=PARTUUID=bfbfc3bc-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
  Console: tty pts/0 DM: LightDM 1.26.0 
  Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 
  rev: c03111 
Battery:
  Message: No system battery data found. Is one present? 
Memory:
  RAM: total: 3.81 GiB used: 376.3 MiB (9.6%) gpu: 76 MiB 
  RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP 
  arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 
  Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 
  3: 1500 4: 1500 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
  class-ID: gpu 
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc 
  class-ID: hdmi 
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc 
  class-ID: hdmi 
  Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting 
  tty: 80x24 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A 
  chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio 
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc 
  class-ID: hdmi 
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc 
  class-ID: hdmi 
  Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
  Sound Server-2: PulseAudio v: 12.2 running: no 
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
  chip-ID: brcm:fe300000 class-ID: mmcnr 
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
  chip-ID: brcm:fd580000 class-ID: ethernet 
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IP v4: 192.168.X.X/24 virtual: secondary scope: global 
  broadcast: 192.168.X.X 
  IP v6: 2a02:2149:a001:e00::2/64 type: dynamic mngtmpaddr noprefixroute 
  scope: global 
  IP v6: fe80::dea6:32ff:fe45:691a/64 scope: link 
  IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
  IP v4: 10.9.X.X/24 scope: global broadcast: 10.9.X.X 
  IP v6: 2a02:2149:a001:e11::1/64 scope: global 
  IP v6: fe80::c1d3:91a0:cf55:4934/64 virtual: stable-privacy scope: link 
  IF-ID-2: tun1 state: unknown speed: 10 Mbps duplex: full mac: N/A 
  IP v4: 10.8.X.X/24 scope: global broadcast: 10.8.X.X 
  IP v6: 2a02:2149:a001:e10::1/64 scope: global 
  IP v6: fe80::a3fe:6f45:71bb:c1e/64 virtual: stable-privacy scope: link 
  WAN IP: 194.219.X.X 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 
  class-ID: serial 
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX 
  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff 
  link-mode: slave accept service-classes: capturing, telephony 
Logical:
  Message: No logical block device data found. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 262.61 GiB used: 135.65 GiB (51.7%) 
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Silicon Motion model: SM32G 
  size: 29.72 GiB block-size: physical: 512 B logical: 512 B rotation: SSD 
  scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to generate data. 
  ID-2: /dev/sda maj-min: 8:0 type: USB model: 05e3 U3 Hard Drive 
  drive model: SSD 850 EVO 250GB family: based SSDs size: 232.89 GiB 
  block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
  rotation: SSD drive rev: 9072 
  drive rev: EMT02B6Q temp: 37 C scheme: GPT 
  SMART: yes state: enabled health: PASSED on: 3y 117d 17h cycles: 1838 
  written: 24.11 TiB 
  Message: No optical or floppy data found. 
Partition:
  ID-1: / raw-size: 29.47 GiB size: 28.95 GiB (98.25%) 
  used: 6.62 GiB (22.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 
  maj-min: 179:2 label: rootfs uuid: 3a324232-335f-4617-84c3-d4889840dc93 
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) 
  used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 
  maj-min: 179:1 label: boot uuid: 6284-658D 
  ID-3: /mnt/Evo raw-size: 232.88 GiB size: 228.23 GiB (98.00%) 
  used: 128.98 GiB (56.5%) fs: ext4 block-size: 4096 B dev: /dev/sda1 
  maj-min: 8:1 label: N/A uuid: 5116808a-333b-415f-b3a4-574d60f4a2d6 
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  power: 100mA chip-ID: 2109:3431 class-ID: 0900 
  Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 
  speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 
  Device-1: 2-2:2 info: Genesys Logic GL3310 SATA 3Gb/s Bridge Controller 
  type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
  speed: 5 Gb/s power: 256mA chip-ID: 05e3:0731 class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Packages: 1519 apt: 1513 lib: 727 snap: 6 
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/docker.list 
  1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
  Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
  1: deb https://deb.nodesource.com/node_15.x buster main
  2: deb-src https://deb.nodesource.com/node_15.x buster main
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
  Active apt repos in: /etc/apt/sources.list.d/speedtest.list 
  1: deb https://ookla.bintray.com/debian generic main
  No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes:
  CPU top: 5 of 398 
  1: cpu: 0.5% command: bash pid: 25879 mem: 2.79 MiB (0.0%) 
  2: cpu: 0.3% command: expressvpnd pid: 682 mem: 43.3 MiB (1.1%) 
  3: cpu: 0.3% command: pihole-ftl pid: 1169 mem: 11.5 MiB (0.3%) 
  4: cpu: 0.2% command: snmpd pid: 630 mem: 5.14 MiB (0.1%) 
  5: cpu: 0.2% command: -bash pid: 24317 mem: 3.79 MiB (0.0%) 
  Memory top: 5 of 398 
  1: mem: 43.3 MiB (1.1%) command: expressvpnd pid: 682 cpu: 0.3% 
  2: mem: 19.8 MiB (0.5%) command: snapd pid: 395 cpu: 0.0% 
  3: mem: 17.2 MiB (0.4%) command: php-fpm: pid: 487 cpu: 0.0% 
  4: mem: 16.6 MiB (0.4%) command: php-fpm: pid: 545 cpu: 0.0% 
  5: mem: 16.3 MiB (0.4%) command: php-fpm: pid: 544 cpu: 0.0% 
Info:
  Processes: 398 Uptime: 1d 20h 51m Init: systemd v: 241 runlevel: 5 
  target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) default: Bash v: 5.0.3 
  running-in: tty pts/0 (SSH) inxi: 3.3.04

Benchmark #46153 - Brand: Samsung 850 EVO