Benchmark #46224 - pibenchmarks.com

Brand: SanDisk SD Extreme Pro A2 (SR128)
A2 C10 V30 U3
#71 / 1,539
153
#1,065 / 1,539
#77 / 369
1,416
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-05-31 10:54:59
#46,224
1,192
-224 (-18.79%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Extreme Pro A2 (SR128)
A2 C10 V30 U3
118.8G
SD
SanDisk
SR128
SDXC
6.00
0x03
SD
8.0
05/2020
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
1,600
42 (-9)

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
31.4 MB/s
41.06 MB/s
30.72 MB/s
717 IOPS
2,890 IOPS
2,869 KB/s
11,560 KB/s
10,319 KB/s
2,188 KB/s
8,118 KB/s
2,384 KB/s

inxi Results
System: Kernel: 5.10.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x709a22dc bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait Console: tty pts/0 Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.7 GiB used: 873.7 MiB (23.0%) RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 179x40 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-0.bpo.5-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: br-d846dc35fff0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: veth1a268a6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.08 GiB used: 7.47 GiB (6.3%) ID-1: /dev/mmcblk1 maj-min: 179:0 model: SR128 size: 119.08 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.79 GiB size: 117.01 GiB (98.50%) used: 7.35 GiB (6.3%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 120.7 MiB (40.4%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 1E48-B72B Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: QinHeng HL-340 USB-Serial adapter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 98mA chip-ID: 1a86:7523 class-ID: ff00 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 38.9 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: apt: 624 lib: 334 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian buster stable Processes: CPU top: 5 of 140 1: cpu: 0.5% command: dockerd pid: 619 mem: 112.1 MiB (2.9%) 2: cpu: 0.4% command: sshd: pid: 5451 mem: 7.00 MiB (0.1%) 3: cpu: 0.4% command: python3 pid: 20113 mem: 274.8 MiB (7.2%) 4: cpu: 0.3% command: init pid: 1 mem: 9.31 MiB (0.2%) 5: cpu: 0.3% command: [kworker/u8:0-events_unbound] pid: 5600 mem: 0.00 MiB (0.0%) Memory top: 5 of 140 1: mem: 274.8 MiB (7.2%) command: python3 pid: 20113 cpu: 0.4% 2: mem: 112.1 MiB (2.9%) command: dockerd pid: 619 cpu: 0.5% 3: mem: 77.2 MiB (2.0%) command: pihole-ftl pid: 13550 cpu: 0.3% 4: mem: 50.2 MiB (1.3%) command: containerd pid: 543 cpu: 0.0% 5: mem: 27.6 MiB (0.7%) command: systemd-journald pid: 192 cpu: 0.1% Info: Processes: 140 Uptime: 20d 21h 21m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 5.10.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x709a22dc 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw 
           fsck.repair=yes net.ifnames=0 rootwait 
           Console: tty pts/0 Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.7 GiB used: 873.7 MiB (23.0%) 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Display: server: No display server data found. Headless machine? tty: 179x40 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.0-0.bpo.5-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: br-d846dc35fff0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: veth1a268a6 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 119.08 GiB used: 7.47 GiB (6.3%) 
           ID-1: /dev/mmcblk1 maj-min: 179:0 model: SR128 size: 119.08 GiB block-size: 
           physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 118.79 GiB size: 117.01 GiB (98.50%) used: 7.35 GiB (6.3%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT 
           uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 
           ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 120.7 MiB (40.4%) 
           fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM 
           uuid: 1E48-B72B 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.1:3 info: QinHeng HL-340 USB-Serial adapter type:  
           driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 98mA 
           chip-ID: 1a86:7523 class-ID: ff00 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:   System Temperatures: cpu: 38.9 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: apt: 624 lib: 334 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian buster stable
Processes: CPU top: 5 of 140 
           1: cpu: 0.5% command: dockerd pid: 619 mem: 112.1 MiB (2.9%) 
           2: cpu: 0.4% command: sshd: pid: 5451 mem: 7.00 MiB (0.1%) 
           3: cpu: 0.4% command: python3 pid: 20113 mem: 274.8 MiB (7.2%) 
           4: cpu: 0.3% command: init pid: 1 mem: 9.31 MiB (0.2%) 
           5: cpu: 0.3% command: [kworker/u8:0-events_unbound] pid: 5600 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 140 
           1: mem: 274.8 MiB (7.2%) command: python3 pid: 20113 cpu: 0.4% 
           2: mem: 112.1 MiB (2.9%) command: dockerd pid: 619 cpu: 0.5% 
           3: mem: 77.2 MiB (2.0%) command: pihole-ftl pid: 13550 cpu: 0.3% 
           4: mem: 50.2 MiB (1.3%) command: containerd pid: 543 cpu: 0.0% 
           5: mem: 27.6 MiB (0.7%) command: systemd-journald pid: 192 cpu: 0.1% 
Info:      Processes: 140 Uptime: 20d 21h 21m Init: systemd v: 241 runlevel: 5 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #46224 - Brand: SanDisk SD Extreme Pro A2 (SR128)