Benchmark #46232 - pibenchmarks.com

Brand: Patriot P300 Series
SSD (M.2 NVMe)
#33 / 1,675
430
#107 / 1,675
#107 / 984
#102 / 281
40,118
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-05-31 14:32:19
#46,232
7,538
-32,580 (-432.21%)
Anonymous
realtek nvm usb enclosure 9210

Storage Details
Patriot P300 Series
SSD (M.2 NVMe)
238.2G
SSD
Patriot
P300256GB
3.00
5,000
0bda:9210
0x0bda (Realtek Semiconductor Corp.)
0x9210 (RTL9210 M.2 NVME Adapter)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
161 MB/s
324.19 MB/s
263.73 MB/s
21,974 IOPS
29,941 IOPS
87,896 KB/s
119,766 KB/s
32,230 KB/s
28,344 KB/s
19,659 KB/s
11,030 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "el_GR.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xb03112 bcm2709.serial=0xa2d2d39a bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.81 GiB used: 1.13 GiB (62.6%) RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Message: No device data found. Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835 ALSA driver: bcm2835_alsa message: bus/chip ids unavailable Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth07574d2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth2b5c51e state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth3de0b01 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth4a2f23b state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth5477431 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth5b1d162 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth6e6fb54 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth914086a state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth994ed06 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: veth9adae45 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: veth9afb504 state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vetha9a9f9e state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: vethbc39a8b state: up speed: 10000 Mbps duplex: full mac: IF-ID-16: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 84.43 GiB (35.4%) ID-1: /dev/sda maj-min: 8:0 type: USB model: Realtek RTL9210 NVME size: 238.47 GiB block-size: physical: 512 B logical: 512 B rotation: SSD rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 238.18 GiB size: 234.64 GiB (98.51%) used: 84.36 GiB (36.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 69.7 MiB (23.3%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 1E48-B72B Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 2 GiB used: 493.2 MiB (24.1%) priority: -2 file: /swapfile Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.1:3 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2815 class-ID: 0900 Device-1: 1-1.1.4:4 info: HP type: Printer driver: usblp interfaces: 3 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 03f0:df11 class-ID: 0701 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-5: 2-1:2 info: VIA Labs ports: 4 rev: 3.2 speed: 5 Gb/s chip-ID: 2109:0815 class-ID: 0900 Device-1: 2-1.3:3 info: Realtek type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 989 lib: 604 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_12.x buster main 2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_12.x buster main Processes: CPU top: 5 of 258 1: cpu: 3.6% command: ffmpeg pid: 10434 mem: 20.9 MiB (1.1%) 2: cpu: 3.3% command: python3 pid: 10351 mem: 253.9 MiB (13.7%) 3: cpu: 3.1% command: frigate.detector.cpu1 pid: 7716 mem: 25.6 MiB (1.3%) 4: cpu: 3.1% command: frigate.detector.cpu2 pid: 7718 mem: 25.6 MiB (1.3%) 5: cpu: 1.7% command: python3 pid: 7722 mem: 15.3 MiB (0.8%) Memory top: 5 of 258 1: mem: 253.9 MiB (13.7%) command: python3 pid: 10351 cpu: 3.3% 2: mem: 91.4 MiB (4.9%) command: python3 pid: 2357 cpu: 0.5% 3: mem: 38.2 MiB (2.0%) command: python3 pid: 7367 cpu: 1.2% 4: mem: 35.7 MiB (1.9%) command: dockerd pid: 644 cpu: 0.3% 5: mem: 25.6 MiB (1.3%) command: frigate.detector.cpu2 pid: 7718 cpu: 3.1% Info: Processes: 258 Uptime: 8h 17m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LANG = "el_GR.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xb03112 bcm2709.serial=0xa2d2d39a 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw 
           fsck.repair=yes net.ifnames=0 rootwait 
           Console: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 1.81 GiB used: 1.13 GiB (62.6%) 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Message: No device data found. 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835 ALSA driver: bcm2835_alsa message: bus/chip ids unavailable 
           Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth07574d2 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth2b5c51e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth3de0b01 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth4a2f23b state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth5477431 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth5b1d162 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: veth6e6fb54 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: veth914086a state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: veth994ed06 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: veth9adae45 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-13: veth9afb504 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-14: vetha9a9f9e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-15: vethbc39a8b state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-16: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 238.47 GiB used: 84.43 GiB (35.4%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB model: Realtek RTL9210 NVME size: 238.47 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD rev: 1.00 
           scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 238.18 GiB size: 234.64 GiB (98.51%) used: 84.36 GiB (36.0%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 
           ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 69.7 MiB (23.3%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 1E48-B72B 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2 GiB used: 493.2 MiB (24.1%) priority: -2 
           file: /swapfile 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.1:3 info: VIA Labs ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2815 
           class-ID: 0900 
           Device-1: 1-1.1.4:4 info: HP type: Printer driver: usblp interfaces: 3 rev: 2.0 
           speed: 480 Mb/s power: 2mA chip-ID: 03f0:df11 class-ID: 0701 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Hub-5: 2-1:2 info: VIA Labs ports: 4 rev: 3.2 speed: 5 Gb/s chip-ID: 2109:0815 
           class-ID: 0900 
           Device-1: 2-1.3:3 info: Realtek type: Mass Storage driver: uas interfaces: 1 rev: 3.2 
           speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 989 lib: 604 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_12.x buster main
           2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_12.x buster main
Processes: CPU top: 5 of 258 
           1: cpu: 3.6% command: ffmpeg pid: 10434 mem: 20.9 MiB (1.1%) 
           2: cpu: 3.3% command: python3 pid: 10351 mem: 253.9 MiB (13.7%) 
           3: cpu: 3.1% command: frigate.detector.cpu1 pid: 7716 mem: 25.6 MiB (1.3%) 
           4: cpu: 3.1% command: frigate.detector.cpu2 pid: 7718 mem: 25.6 MiB (1.3%) 
           5: cpu: 1.7% command: python3 pid: 7722 mem: 15.3 MiB (0.8%) 
           Memory top: 5 of 258 
           1: mem: 253.9 MiB (13.7%) command: python3 pid: 10351 cpu: 3.3% 
           2: mem: 91.4 MiB (4.9%) command: python3 pid: 2357 cpu: 0.5% 
           3: mem: 38.2 MiB (2.0%) command: python3 pid: 7367 cpu: 1.2% 
           4: mem: 35.7 MiB (1.9%) command: dockerd pid: 644 cpu: 0.3% 
           5: mem: 25.6 MiB (1.3%) command: frigate.detector.cpu2 pid: 7718 cpu: 3.1% 
Info:      Processes: 258 Uptime: 8h 17m Init: systemd v: 241 runlevel: 5 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #46232 - Brand: Patriot P300 Series