Benchmark #46303 - pibenchmarks.com

Brand: BlueRay Ultra M8S Series
SSD (2.5" SATA)
#1,027 / 1,675
3
#770 / 1,675
#744 / 984
#232 / 370
5,604

Overview
2021-06-02 22:46:27
#46,303
4,113
-1,491 (-36.25%)
JorF
Kingston SA400S37/120G PI4

Storage Details
BlueRay Ultra M8S Series
SSD (2.5" SATA)
120G
SSD
BlueRay
SDM8SI120A
2.5 inch
SATA
3.00
5,000
1d6b:1153
0x1d6b (Linux Foundation)
0x1153 (ASM1153 SATA 3Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
116 MB/s
141.56 MB/s
131.58 MB/s
3,892 IOPS
3,331 IOPS
15,571 KB/s
13,326 KB/s
18,316 KB/s
14,406 KB/s
10,794 KB/s
16,438 KB/s

inxi Results
System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60i,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.81 GiB used: 792.8 MiB (20.3%) gpu: 252 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 648 Speed: 900 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-4: GEMBIRD type: USB driver: uvcvideo bus-ID: 1-1.1:3 chip-ID: 1908:2311 class-ID: 0e02 Display: server: X.org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev tty: 240x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Use of uninitialized value in string ne at ./inxi line 10735. Drives: Local Storage: total: 126.38 GiB used: 30.7 GiB (24.3%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD16G size: 14.59 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB model: SDM8SI120A size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: S1022A0 temp: 42 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 150d 6h cycles: 333 read: 4.8 MiB written: 7.9 MiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.54 GiB size: 109.73 GiB (98.38%) used: 24.99 GiB (22.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 9F2D-0578 ID-3: /media/pi/boot1 raw-size: 256 MiB size: 252 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 9F2D-0578 ID-4: /media/pi/rootfs1 raw-size: 14.34 GiB size: 14.05 GiB (98.00%) used: 5.62 GiB (40.0%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: GEMBIRD type: Video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 256mA chip-ID: 1908:2311 class-ID: 0e02 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:1153 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1826 lib: 947 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_10.x buster main 2: deb-src https: //deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 179 1: cpu: 34.4% command: motion pid: 578 mem: 56.6 MiB (1.5%) 2: cpu: 7.6% command: node-red pid: 24852 mem: 142.9 MiB (3.9%) 3: cpu: 7.5% command: [w1_bus_master1] pid: 175 mem: 0.00 MiB (0.0%) 4: cpu: 1.7% command: [kworker/u9:2-uvcvideo] pid: 3932 mem: 0.00 MiB (0.0%) 5: cpu: 1.1% command: [kworker/u9:1-uvcvideo] pid: 12614 mem: 0.00 MiB (0.0%) Memory top: 5 of 179 1: mem: 142.9 MiB (3.9%) command: node-red pid: 24852 cpu: 7.6% 2: mem: 63.4 MiB (1.7%) command: xorg pid: 542 cpu: 0.0% 3: mem: 56.6 MiB (1.5%) command: motion pid: 578 cpu: 34.4% 4: mem: 34.4 MiB (0.9%) command: systemd-journald pid: 115 cpu: 0.0% 5: mem: 32.5 MiB (0.8%) command: lxpanel pid: 685 cpu: 0.0% Info: Processes: 179 Uptime: 5d 6h 28m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 
           video=HDMI-A-1:1920x1080M@60i,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.81 GiB used: 792.8 MiB (20.3%) gpu: 252 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 648 
           Speed: 900 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-4: GEMBIRD type: USB driver: uvcvideo bus-ID: 1-1.1:3 chip-ID: 1908:2311 
           class-ID: 0e02 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev tty: 240x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6119 hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: capturing, telephony 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Use of uninitialized value in string ne at ./inxi line 10735.
Drives:    Local Storage: total: 126.38 GiB used: 30.7 GiB (24.3%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SD16G size: 14.59 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB model: SDM8SI120A size: 111.79 GiB block-size: 
           physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: S1022A0 temp: 42 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 150d 6h cycles: 333 read: 4.8 MiB 
           written: 7.9 MiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 111.54 GiB size: 109.73 GiB (98.38%) used: 24.99 GiB (22.8%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 9F2D-0578 
           ID-3: /media/pi/boot1 raw-size: 256 MiB size: 252 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 9F2D-0578 
           ID-4: /media/pi/rootfs1 raw-size: 14.34 GiB size: 14.05 GiB (98.00%) 
           used: 5.62 GiB (40.0%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 
           label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.1:3 info: GEMBIRD type: Video driver: uvcvideo interfaces: 2 rev: 2.0 
           speed: 480 Mb/s power: 256mA chip-ID: 1908:2311 class-ID: 0e02 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:1153 
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1826 lib: 947 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_10.x buster main
           2: deb-src https: //deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 179 
           1: cpu: 34.4% command: motion pid: 578 mem: 56.6 MiB (1.5%) 
           2: cpu: 7.6% command: node-red pid: 24852 mem: 142.9 MiB (3.9%) 
           3: cpu: 7.5% command: [w1_bus_master1] pid: 175 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.7% command: [kworker/u9:2-uvcvideo] pid: 3932 mem: 0.00 MiB (0.0%) 
           5: cpu: 1.1% command: [kworker/u9:1-uvcvideo] pid: 12614 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 179 
           1: mem: 142.9 MiB (3.9%) command: node-red pid: 24852 cpu: 7.6% 
           2: mem: 63.4 MiB (1.7%) command: xorg pid: 542 cpu: 0.0% 
           3: mem: 56.6 MiB (1.5%) command: motion pid: 578 cpu: 34.4% 
           4: mem: 34.4 MiB (0.9%) command: systemd-journald pid: 115 cpu: 0.0% 
           5: mem: 32.5 MiB (0.8%) command: lxpanel pid: 685 cpu: 0.0% 
Info:      Processes: 179 Uptime: 5d 6h 28m Init: systemd v: 241 runlevel: 5 
           target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #46303 - Brand: BlueRay Ultra M8S Series