Benchmark #4660 - pibenchmarks.com

Brand: Samsung 850 EVO
SSD (2.5" SATA)
#17 / 1,539
561
#444 / 1,539
#426 / 875
#97 / 363
6,521
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-04 11:08:13
#4,660
6,228
-293 (-4.70%)
Spark343
Samsung SSD 850 EVO 250GB on Pi 4 using StarTech SATA to USB adapter

Storage Details
Samsung 850 EVO
SSD (2.5" SATA)
250
SSD
Samsung
SSD850EVO250GB
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,000 (+500)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
139 MB/s
297.85 MB/s
291.3 MB/s
12,190 IOPS
26,841 IOPS
48,761 KB/s
107,365 KB/s
18,396 KB/s
14,367 KB/s
14,986 KB/s
15,857 KB/s

inxi Results
System: Host: AGS-NAS Kernel: 4.19.75-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usbhid.mousepoll=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=e7e4eafc-07 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 425.6 MiB (11.0%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 2000 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbdev unloaded: modesetting resolution: 1920x1080~N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v8+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: usb0 state: down mac: IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 5.71 TiB used: 406.05 GiB (6.9%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO 250GB size: 232.89 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-3: /dev/sdb type: USB vendor: Western Digital model: WD My Book 25EE size: 5.46 TiB block size: physical: 4096 B logical: 512 B rev: 4004 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 230.39 GiB size: 225.77 GiB (98.00%) used: 5.64 GiB (2.5%) fs: ext4 block size: 4096 B dev: /dev/sda7 label: root uuid: 37c233ae-affe-4bd9-82ba-cde560817f11 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 50A3-0603 ID-3: /media/pi/6TB NAS raw size: 5.46 TiB size: 5.41 TiB (99.19%) used: 400.36 GiB (7.2%) fs: ext4 block size: 4096 B dev: /dev/sdb label: 6TB NAS uuid: afb871ff-54a3-4526-b7c1-eb859689d74a Unmounted: ID-1: /dev/mmcblk0p1 size: 2.21 GiB fs: vfat label: RECOVERY uuid: 5A80-05D2 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 419091c8-e788-43c8-a52f-7dac01f82a8f ID-4: /dev/sda1 size: 2.21 GiB fs: vfat label: RECOVERY uuid: 5A80-05D2 ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 419091c8-e788-43c8-a52f-7dac01f82a8f ID-7: /dev/sda6 size: 256.0 MiB fs: vfat label: boot uuid: 50A3-0603 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.2:3 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2812 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Hub: 2-2:3 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0812 Device-2: 2-2.1:5 info: Western Digital type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1058:25ee Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 12.9% command: transmission-gtk pid: 1716 mem: 68.4 MiB (1.8%) 2: cpu: 3.7% command: pcmanfm pid: 1899 mem: 25.3 MiB (0.6%) 3: cpu: 3.2% command: lxterminal pid: 2668 mem: 27.0 MiB (0.7%) 4: cpu: 2.1% command: smbd pid: 1396 mem: 16.4 MiB (0.4%) 5: cpu: 0.8% command: packagekitd pid: 2838 mem: 12.7 MiB (0.3%) Memory top: 5 1: mem: 70.9 MiB (1.8%) command: xorg pid: 512 cpu: 0.4% 2: mem: 68.4 MiB (1.8%) command: transmission-gtk pid: 1716 cpu: 12.9% 3: mem: 28.8 MiB (0.7%) command: vncserver-x11-core pid: 456 cpu: 0.0% 4: mem: 28.2 MiB (0.7%) command: lxpanel pid: 1533 cpu: 0.4% 5: mem: 27.0 MiB (0.7%) command: lxterminal pid: 2668 cpu: 3.2% Info: Processes: 154 Uptime: 8h 08m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: AGS-NAS Kernel: 4.19.75-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usbhid.mousepoll=0 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=e7e4eafc-07 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether 
           quiet splash plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 425.6 MiB (11.0%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 2000 MHz min/max: 600/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 
           4: 2000 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbdev unloaded: modesetting 
           resolution: 1920x1080~N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v8+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: usb0 state: down mac:  
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 5.71 TiB used: 406.05 GiB (6.9%) 
           ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO 250GB size: 232.89 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD My Book 25EE size: 5.46 TiB 
           block size: physical: 4096 B logical: 512 B rev: 4004 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 230.39 GiB size: 225.77 GiB (98.00%) used: 5.64 GiB (2.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda7 label: root 
           uuid: 37c233ae-affe-4bd9-82ba-cde560817f11 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.8 MiB (20.9%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 50A3-0603 
           ID-3: /media/pi/6TB NAS raw size: 5.46 TiB size: 5.41 TiB (99.19%) 
           used: 400.36 GiB (7.2%) fs: ext4 block size: 4096 B dev: /dev/sdb label: 6TB NAS 
           uuid: afb871ff-54a3-4526-b7c1-eb859689d74a 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.21 GiB fs: vfat label: RECOVERY uuid: 5A80-05D2 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 419091c8-e788-43c8-a52f-7dac01f82a8f 
           ID-4: /dev/sda1 size: 2.21 GiB fs: vfat label: RECOVERY uuid: 5A80-05D2 
           ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 419091c8-e788-43c8-a52f-7dac01f82a8f 
           ID-7: /dev/sda6 size: 256.0 MiB fs: vfat label: boot uuid: 50A3-0603 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.2:3 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 2109:2812 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Hub: 2-2:3 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0812 
           Device-2: 2-2.1:5 info: Western Digital type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1058:25ee Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 12.9% command: transmission-gtk pid: 1716 mem: 68.4 MiB (1.8%) 
           2: cpu: 3.7% command: pcmanfm pid: 1899 mem: 25.3 MiB (0.6%) 
           3: cpu: 3.2% command: lxterminal pid: 2668 mem: 27.0 MiB (0.7%) 
           4: cpu: 2.1% command: smbd pid: 1396 mem: 16.4 MiB (0.4%) 
           5: cpu: 0.8% command: packagekitd pid: 2838 mem: 12.7 MiB (0.3%) 
           Memory top: 5 
           1: mem: 70.9 MiB (1.8%) command: xorg pid: 512 cpu: 0.4% 
           2: mem: 68.4 MiB (1.8%) command: transmission-gtk pid: 1716 cpu: 12.9% 
           3: mem: 28.8 MiB (0.7%) command: vncserver-x11-core pid: 456 cpu: 0.0% 
           4: mem: 28.2 MiB (0.7%) command: lxpanel pid: 1533 cpu: 0.4% 
           5: mem: 27.0 MiB (0.7%) command: lxterminal pid: 2668 cpu: 3.2% 
Info:      Processes: 154 Uptime: 8h 08m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #4660 - Brand: Samsung 850 EVO