Benchmark #46968 - pibenchmarks.com

Brand: Unidentified ASMedia mSATA to USB Adapter
SSD (mSATA)
#313 / 1,672
38
#509 / 1,672
#492 / 983
#10 / 69
6,964
	Amazon.com AliExpress

Overview
2021-06-23 14:54:57
#46,968
5,347
-1,617 (-30.24%)
Anonymous
assesso x857 v2

Storage Details
Unidentified ASMedia mSATA to USB Adapter
SSD (mSATA)
120G
SSD
ASMedia
2115
2.5 inch
SATA
3.00
5,000
174c:0857
0x174c (ASMedia Technology Inc.)
0x0857
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
23.3 MB/s
17.89 MB/s
20.79 MB/s
16,582 IOPS
27,197 IOPS
66,331 KB/s
108,791 KB/s
29,299 KB/s
9,578 KB/s
14,924 KB/s
13,800 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x567c75cc bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.66 GiB used: 1.48 GiB (40.4%) RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 800 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v4: virtual: secondary scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth03f8d24 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth1bb89cc state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth5299b32 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth5aeefda state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth6f0284f state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth729b55f state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth82bc304 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth85f9f60 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth90523fb state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vetha80ad8c state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethbaf812f state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethe8a8c14 state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: vethf1575b1 state: up speed: 10000 Mbps duplex: full mac: IF-ID-16: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 61.57 GiB (55.1%) ID-1: /dev/sda maj-min: 8:0 type: USB model: MSATA 120GB SSD size: 111.79 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.5 GiB size: 111.44 GiB (99.95%) used: 61.45 GiB (55.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: aa689b43-11fa-48cd-90f7-23af92012096 ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 122.3 MiB (40.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 0A76-3ECA Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.3:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Device-1: 1-1.3.1:4 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 0658:0200 class-ID: 0a00 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:4 info: Google type: driver: usbfs interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 18d1:9302 class-ID: 0000 Device-2: 2-2:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:0857 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 570 lib: 372 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Active apt repos in: /etc/apt/sources.list.d/coral-edgetpu.list 1: deb https: //packages.cloud.google.com/apt coral-edgetpu-stable main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable Processes: CPU top: 5 of 264 1: cpu: 28.9% command: ffmpeg pid: 11392 mem: 41.7 MiB (1.1%) 2: cpu: 28.5% command: ffmpeg pid: 11396 mem: 42.7 MiB (1.1%) 3: cpu: 14.9% command: ffmpeg pid: 11391 mem: 39.9 MiB (1.0%) 4: cpu: 6.4% command: python3 pid: 9120 mem: 293.0 MiB (7.8%) 5: cpu: 4.5% command: frigate.detector.coral pid: 11376 mem: 87.2 MiB (2.3%) Memory top: 5 of 264 1: mem: 293.0 MiB (7.8%) command: python3 pid: 9120 cpu: 6.4% 2: mem: 106.6 MiB (2.8%) command: node pid: 6765 cpu: 3.0% 3: mem: 105.5 MiB (2.8%) command: python3 pid: 1749 cpu: 2.3% 4: mem: 105.0 MiB (2.8%) command: python3 pid: 10866 cpu: 3.7% 5: mem: 105.0 MiB (2.8%) command: dockerd pid: 711 cpu: 1.3% Info: Processes: 264 Uptime: 11m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x567c75cc 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw 
           fsck.repair=yes net.ifnames=0 rootwait 
           Console: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.66 GiB used: 1.48 GiB (40.4%) 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 800 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v4:  virtual: secondary scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth03f8d24 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth1bb89cc state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth5299b32 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth5aeefda state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth6f0284f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth729b55f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: veth82bc304 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: veth85f9f60 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: veth90523fb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: vetha80ad8c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-13: vethbaf812f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-14: vethe8a8c14 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-15: vethf1575b1 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-16: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 111.79 GiB used: 61.57 GiB (55.1%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB model: MSATA 120GB SSD size: 111.79 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 111.5 GiB size: 111.44 GiB (99.95%) used: 61.45 GiB (55.1%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: aa689b43-11fa-48cd-90f7-23af92012096 
           ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 122.3 MiB (40.9%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 0A76-3ECA 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.3:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA 
           chip-ID: 1a40:0101 class-ID: 0900 
           Device-1: 1-1.3.1:4 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           power: 100mA chip-ID: 0658:0200 class-ID: 0a00 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:4 info: Google type:  driver: usbfs interfaces: 1 
           rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 18d1:9302 class-ID: 0000 
           Device-2: 2-2:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip-ID: 174c:0857 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 570 lib: 372 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
           Active apt repos in: /etc/apt/sources.list.d/coral-edgetpu.list 
           1: deb https: //packages.cloud.google.com/apt coral-edgetpu-stable main
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable
Processes: CPU top: 5 of 264 
           1: cpu: 28.9% command: ffmpeg pid: 11392 mem: 41.7 MiB (1.1%) 
           2: cpu: 28.5% command: ffmpeg pid: 11396 mem: 42.7 MiB (1.1%) 
           3: cpu: 14.9% command: ffmpeg pid: 11391 mem: 39.9 MiB (1.0%) 
           4: cpu: 6.4% command: python3 pid: 9120 mem: 293.0 MiB (7.8%) 
           5: cpu: 4.5% command: frigate.detector.coral pid: 11376 mem: 87.2 MiB (2.3%) 
           Memory top: 5 of 264 
           1: mem: 293.0 MiB (7.8%) command: python3 pid: 9120 cpu: 6.4% 
           2: mem: 106.6 MiB (2.8%) command: node pid: 6765 cpu: 3.0% 
           3: mem: 105.5 MiB (2.8%) command: python3 pid: 1749 cpu: 2.3% 
           4: mem: 105.0 MiB (2.8%) command: python3 pid: 10866 cpu: 3.7% 
           5: mem: 105.0 MiB (2.8%) command: dockerd pid: 711 cpu: 1.3% 
Info:      Processes: 264 Uptime: 11m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: 
           gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #46968 - Brand: Unidentified ASMedia mSATA to USB Adapter