Benchmark #46986 - pibenchmarks.com

Brand: Lexar USB Flash Drive
USB Flash
#225 / 1,539
44
#1,111 / 1,539
#21 / 90
#23 / 86
1,297
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.pl Amazon.sg

Overview
2021-06-24 02:03:23
#46,986
720
-577 (-80.14%)
Anonymous
Lexar USB Boot w PNY A1 MMC

Storage Details
Lexar USB Flash Drive
USB Flash
7.8G
USB Flash
Lexar
USBFlashDrive
0xa0e0
2.00
480
2109:a838
0x2109
0xa838 (JumpDrive Tough)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
2,147 (+647)
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
24.6 MB/s
30.39 MB/s
30.31 MB/s
102 IOPS
1,030 IOPS
410 KB/s
4,123 KB/s
12,929 KB/s
8,893 KB/s
4,050 KB/s
427 KB/s

inxi Results
System: Kernel: 5.10.17-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=423eb778-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel, docker dm: LightDM 1.26.0 Distro: Raspberry Pi OS base: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Battery: Device-1: hidpp_battery_0 model: Logitech M705 charge: 95% rechargeable: yes status: Discharging Device-2: hidpp_battery_1 model: Logitech Wireless Solar Keyboard K750 charge: 100% rechargeable: yes status: N/A Memory: RAM: total: 7.7 GiB used: 870 MiB (11.0%) gpu: 76 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 2200 MHz min/max: 600/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200 4: 2200 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.Org 1.20.4 driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 480x270mm (18.9x10.6") diag: 551mm (21.7") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.17-v8+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth30542ba state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth31347ea state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth80c54ee state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth82bb84d state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth9e8a650 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethee6bcb3 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 88.05 GiB used: 5.5 GiB (6.2%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SD size: 58.24 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Lexar model: USB Flash Drive size: 29.81 GiB block-size: physical: 512 B logical: 512 B rotation: SSD rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 7.81 GiB size: 7.63 GiB (97.63%) used: 5.47 GiB (71.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 92abde04-8c54-4279-a544-8b7f61131e2e ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.3 MiB (11.6%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 8697-34C2 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 58.24 GiB fs: vfat label: N/A uuid: 3069-AFF6 USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: Lexar Media JumpDrive Tough type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 05dc:a838 class-ID: 0806 Device-2: 1-1.4:4 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c52b class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1482 lib: 733 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 232 1: cpu: 5.3% command: xorg pid: 647 mem: 74.5 MiB (0.9%) 2: cpu: 2.1% command: python3 pid: 5954 mem: 166.4 MiB (2.1%) 3: cpu: 1.4% command: pulseaudio pid: 5384 mem: 9.19 MiB (0.1%) 4: cpu: 1.3% command: rpi started by: mousepad pid: 6675 mem: 33.6 MiB (0.4%) 5: cpu: 1.1% command: python3 pid: 3293 mem: 57.0 MiB (0.7%) Memory top: 5 of 232 1: mem: 166.4 MiB (2.1%) command: python3 pid: 5954 cpu: 2.1% 2: mem: 90.9 MiB (1.1%) command: dockerd pid: 826 cpu: 0.5% 3: mem: 74.5 MiB (0.9%) command: xorg pid: 647 cpu: 5.3% 4: mem: 57.0 MiB (0.7%) command: python3 pid: 3293 cpu: 1.1% 5: mem: 54.5 MiB (0.6%) command: docker pid: 2778 cpu: 0.0% Info: Processes: 232 Uptime: 15m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 5.10.17-v8+ aarch64 bits: 64 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=423eb778-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel, docker dm: LightDM 1.26.0 Distro: Raspberry Pi OS 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 
           Battery:   Device-1: hidpp_battery_0 model: Logitech M705 charge: 95% 
           rechargeable: yes status: Discharging 
           Device-2: hidpp_battery_1 model: Logitech Wireless Solar Keyboard K750 charge: 100% rechargeable: yes status: N/A 
Memory:    RAM: total: 7.7 GiB used: 870 MiB (11.0%) gpu: 76 MiB 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 2200 MHz min/max: 600/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200 
           4: 2200 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Display: server: X.Org 1.20.4 driver: loaded: modesetting unloaded: fbdev 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 480x270mm (18.9x10.6") 
           diag: 551mm (21.7") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Sound Server-1: ALSA v: k5.10.17-v8+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth30542ba state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth31347ea state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth80c54ee state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth82bb84d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth9e8a650 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethee6bcb3 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: 
           hardware: no software: yes address:  
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 88.05 GiB used: 5.5 GiB (6.2%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: SD size: 58.24 GiB block-size: physical: 512 B 
           logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Lexar model: USB Flash Drive 
           size: 29.81 GiB block-size: physical: 512 B logical: 512 B rotation: SSD 
           rev: 1100 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 7.81 GiB size: 7.63 GiB (97.63%) used: 5.47 GiB (71.8%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 92abde04-8c54-4279-a544-8b7f61131e2e 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.3 MiB (11.6%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 8697-34C2 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 58.24 GiB fs: vfat label: N/A uuid: 3069-AFF6 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.1:3 info: Lexar Media JumpDrive Tough type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA 
           chip-ID: 05dc:a838 class-ID: 0806 Device-2: 1-1.4:4 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA 
           chip-ID: 046d:c52b class-ID: 0300 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1482 lib: 733 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 232 
           1: cpu: 5.3% command: xorg pid: 647 mem: 74.5 MiB (0.9%) 
           2: cpu: 2.1% command: python3 pid: 5954 mem: 166.4 MiB (2.1%) 
           3: cpu: 1.4% command: pulseaudio pid: 5384 mem: 9.19 MiB (0.1%) 
           4: cpu: 1.3% command: rpi started by: mousepad pid: 6675 mem: 33.6 MiB (0.4%) 
           5: cpu: 1.1% command: python3 pid: 3293 mem: 57.0 MiB (0.7%) 
           Memory top: 5 of 232 
           1: mem: 166.4 MiB (2.1%) command: python3 pid: 5954 cpu: 2.1% 
           2: mem: 90.9 MiB (1.1%) command: dockerd pid: 826 cpu: 0.5% 
           3: mem: 74.5 MiB (0.9%) command: xorg pid: 647 cpu: 5.3% 
           4: mem: 57.0 MiB (0.7%) command: python3 pid: 3293 cpu: 1.1% 
           5: mem: 54.5 MiB (0.6%) command: docker pid: 2778 cpu: 0.0% 
Info:      Processes: 232 Uptime: 15m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.04

Benchmark #46986 - Brand: Lexar USB Flash Drive