Benchmark #47064 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#107 / 1,679
170
#678 / 1,679
#655 / 984
#25 / 69
6,097
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-06-25 20:43:41
#47,064
9,247
+3,150 (+34.07%)
Anonymous
hh

Storage Details
Transcend MSA Series
SSD (mSATA)
256G
SSD
Transcend
TS256GMSA230S
SATA
3.00
5,000
174c:0857
0x174c (ASMedia Technology Inc.)
0x0857
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
144 MB/s
315.5 MB/s
200.46 MB/s
21,810 IOPS
30,704 IOPS
87,241 KB/s
122,818 KB/s
35,918 KB/s
26,816 KB/s
18,839 KB/s
29,826 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x567c75cc bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.66 GiB used: 1.2 GiB (32.9%) RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v4: virtual: secondary scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth09a45be state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth0d63e32 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth14a32d6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth2a77064 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth3c94c9e state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth4cb31c1 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth5fe3cee state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth6f62e58 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethab3db4e state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethadbe041 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethb60c84b state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethf75bd88 state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 61.75 GiB (25.9%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Transcend model: TS256GMSA230S size: 238.47 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 238.18 GiB size: 111.44 GiB (46.79%) used: 61.63 GiB (55.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: aa689b43-11fa-48cd-90f7-23af92012096 ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 121.9 MiB (40.8%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 0A76-3ECA Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.3:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Device-1: 1-1.3.1:4 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 0658:0200 class-ID: 0a00 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:4 info: Google type: driver: N/A interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 18d1:9302 class-ID: 0000 Device-2: 2-2:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:0857 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 576 lib: 372 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Active apt repos in: /etc/apt/sources.list.d/coral-edgetpu.list 1: deb https: //packages.cloud.google.com/apt coral-edgetpu-stable main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable Processes: CPU top: 5 of 248 1: cpu: 3.5% command: python3 pid: 9200 mem: 305.7 MiB (8.1%) 2: cpu: 1.5% command: appdaemon started by: python3 pid: 11018 mem: 38.9 MiB (1.0%) 3: cpu: 1.3% command: node pid: 6843 mem: 108.7 MiB (2.9%) 4: cpu: 1.2% command: python3 pid: 1827 mem: 106.4 MiB (2.8%) 5: cpu: 0.8% command: dockerd pid: 723 mem: 109.8 MiB (2.9%) Memory top: 5 of 248 1: mem: 305.7 MiB (8.1%) command: python3 pid: 9200 cpu: 3.5% 2: mem: 109.8 MiB (2.9%) command: dockerd pid: 723 cpu: 0.8% 3: mem: 108.7 MiB (2.9%) command: node pid: 6843 cpu: 1.3% 4: mem: 106.4 MiB (2.8%) command: python3 pid: 1827 cpu: 1.2% 5: mem: 61.1 MiB (1.6%) command: docker pid: 1491 cpu: 0.0% Info: Processes: 248 Uptime: 26m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x567c75cc 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw 
           fsck.repair=yes net.ifnames=0 rootwait 
           Console: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.66 GiB used: 1.2 GiB (32.9%) 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v4:  virtual: secondary scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth09a45be state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth0d63e32 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth14a32d6 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth2a77064 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth3c94c9e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth4cb31c1 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: veth5fe3cee state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: veth6f62e58 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: vethab3db4e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: vethadbe041 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-13: vethb60c84b state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-14: vethf75bd88 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-15: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 238.47 GiB used: 61.75 GiB (25.9%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Transcend model: TS256GMSA230S 
           size: 238.47 GiB block-size: physical: 512 B logical: 512 B rotation: SSD 
           scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 238.18 GiB size: 111.44 GiB (46.79%) used: 61.63 GiB (55.3%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: aa689b43-11fa-48cd-90f7-23af92012096 
           ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 121.9 MiB (40.8%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 0A76-3ECA 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.3:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA 
           chip-ID: 1a40:0101 class-ID: 0900 
           Device-1: 1-1.3.1:4 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           power: 100mA chip-ID: 0658:0200 class-ID: 0a00 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:4 info: Google type:  driver: N/A interfaces: 1 rev: 3.1 
           speed: 5 Gb/s power: 896mA chip-ID: 18d1:9302 class-ID: 0000 
           Device-2: 2-2:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip-ID: 174c:0857 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 576 lib: 372 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
           Active apt repos in: /etc/apt/sources.list.d/coral-edgetpu.list 
           1: deb https: //packages.cloud.google.com/apt coral-edgetpu-stable main
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64] https: //download.docker.com/linux/debian buster stable
Processes: CPU top: 5 of 248 
           1: cpu: 3.5% command: python3 pid: 9200 mem: 305.7 MiB (8.1%) 
           2: cpu: 1.5% command: appdaemon started by: python3 pid: 11018 mem: 38.9 MiB (1.0%) 
           3: cpu: 1.3% command: node pid: 6843 mem: 108.7 MiB (2.9%) 
           4: cpu: 1.2% command: python3 pid: 1827 mem: 106.4 MiB (2.8%) 
           5: cpu: 0.8% command: dockerd pid: 723 mem: 109.8 MiB (2.9%) 
           Memory top: 5 of 248 
           1: mem: 305.7 MiB (8.1%) command: python3 pid: 9200 cpu: 3.5% 
           2: mem: 109.8 MiB (2.9%) command: dockerd pid: 723 cpu: 0.8% 
           3: mem: 108.7 MiB (2.9%) command: node pid: 6843 cpu: 1.3% 
           4: mem: 106.4 MiB (2.8%) command: python3 pid: 1827 cpu: 1.2% 
           5: mem: 61.1 MiB (1.6%) command: docker pid: 1491 cpu: 0.0% 
Info:      Processes: 248 Uptime: 26m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: 
           gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

Benchmark #47064 - Brand: Transcend MSA Series