Benchmark #47328 - pibenchmarks.com

Brand: Samsung 840 EVO
SSD (2.5" SATA)
#48 / 1,675
332
#582 / 1,675
#562 / 984
#122 / 370
6,570
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-07-02 21:13:35
#47,328
5,801
-769 (-13.26%)
Anonymous
Samsung Evo 840 SSD on Pi4 using Sabrent USB 3.0 SATA to USB adapter

Storage Details
Samsung 840 EVO
SSD (2.5" SATA)
120G
SSD
Samsung
SSD840EVO120GB
SATA
3.00
5,000
152d:1561
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x1561
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
102 MB/s
193.44 MB/s
173.38 MB/s
6,106 IOPS
5,598 IOPS
24,424 KB/s
22,394 KB/s
26,619 KB/s
22,377 KB/s
21,119 KB/s
25,880 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LANG = "de_DE.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 5.10.0-7-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0xb7b978e1 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:1561:u console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: tty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.63 GiB used: 443.5 MiB (5.7%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 171x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-7-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 3.99 GiB (3.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 840 EVO 120GB family: based SSDs size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: 0214 drive rev: EXT0AB0Q temp: 28 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 35d 5h cycles: 959 written: 22.07 TiB Pre-Fail: reallocated sector: 99 threshold: 10 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.5 GiB size: 111.44 GiB (99.95%) used: 3.86 GiB (3.5%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 67714a03-7cde-4f72-94ad-daf4a4d06359 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.4 MiB (42.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 659C-8598 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: Dell QuietKey Keyboard type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 413c:2106 class-ID: 0301 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:1561 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 408 lib: 211 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/kubernetes.list 1: deb https: //apt.kubernetes.io/ kubernetes-xenial main Processes: CPU top: 5 of 130 1: cpu: 1.3% command: init pid: 1 mem: 9.66 MiB (0.1%) 2: cpu: 1.3% command: [usb-storage] pid: 158 mem: 0.00 MiB (0.0%) 3: cpu: 0.5% command: [kworker/0:0-events] pid: 1019 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: [irq/27-mmc1] pid: 132 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: [ksoftirqd/0] pid: 11 mem: 0.00 MiB (0.0%) Memory top: 5 of 130 1: mem: 89.9 MiB (1.1%) command: dockerd pid: 571 cpu: 0.2% 2: mem: 51.7 MiB (0.6%) command: containerd pid: 540 cpu: 0.1% 3: mem: 19.3 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3 pid: 539 cpu: 0.0% 4: mem: 17.2 MiB (0.2%) command: packagekitd pid: 1306 cpu: 0.0% 5: mem: 16.0 MiB (0.2%) command: systemd-journald pid: 219 cpu: 0.2% Info: Processes: 130 Uptime: 11m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.04

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LANG = "de_DE.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Kernel: 5.10.0-7-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0xb7b978e1 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:1561:u console=tty0 
           console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait 
           Console: tty pts/0 Distro: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.63 GiB used: 443.5 MiB (5.7%) 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu 
           Display: server: No display server data found. Headless machine? tty: 171x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.0-7-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 111.79 GiB used: 3.99 GiB (3.6%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 840 EVO 120GB 
           family: based SSDs size: 111.79 GiB block-size: physical: 512 B logical: 512 B 
           sata: 3.1 speed: 6.0 Gb/s rotation: SSD rev: 0214 drive rev: EXT0AB0Q 
           temp: 28 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 35d 5h cycles: 959 written: 22.07 TiB 
           Pre-Fail: reallocated sector: 99 threshold: 10 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 111.5 GiB size: 111.44 GiB (99.95%) used: 3.86 GiB (3.5%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: 67714a03-7cde-4f72-94ad-daf4a4d06359 
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.4 MiB (42.7%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 659C-8598 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.4:3 info: Dell QuietKey Keyboard type: Keyboard 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA 
           chip-ID: 413c:2106 class-ID: 0301 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           power: 896mA chip-ID: 152d:1561 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 408 lib: 211 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
           Active apt repos in: /etc/apt/sources.list.d/kubernetes.list 
           1: deb https: //apt.kubernetes.io/ kubernetes-xenial main
Processes: CPU top: 5 of 130 
           1: cpu: 1.3% command: init pid: 1 mem: 9.66 MiB (0.1%) 
           2: cpu: 1.3% command: [usb-storage] pid: 158 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.5% command: [kworker/0:0-events] pid: 1019 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: [irq/27-mmc1] pid: 132 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: [ksoftirqd/0] pid: 11 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 130 
           1: mem: 89.9 MiB (1.1%) command: dockerd pid: 571 cpu: 0.2% 
           2: mem: 51.7 MiB (0.6%) command: containerd pid: 540 cpu: 0.1% 
           3: mem: 19.3 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3 
           pid: 539 cpu: 0.0% 
           4: mem: 17.2 MiB (0.2%) command: packagekitd pid: 1306 cpu: 0.0% 
           5: mem: 16.0 MiB (0.2%) command: systemd-journald pid: 219 cpu: 0.2% 
Info:      Processes: 130 Uptime: 11m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: 
           gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.04

Benchmark #47328 - Brand: Samsung 840 EVO