Benchmark #47639 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL16G)
C10
#32 / 1,539
302
#1,339 / 1,539
#60 / 369
792
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-07-10 23:09:46
#47,639
856
+64 (+7.48%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL16G)
C10
14.6G
SD
SanDisk
SL16G
SDHC
3.00
0x03
SD
8.0
05/2017
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,200
400
450
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
10.9 MB/s
21.59 MB/s
21.61 MB/s
711 IOPS
1,834 IOPS
2,845 KB/s
7,338 KB/s
6,996 KB/s
3,247 KB/s
5,935 KB/s
2,695 KB/s

inxi Results
System: Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=72895765-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1001.8 MiB used: 384.4 MiB (38.4%) gpu: 256 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 bogomips: 230 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 80x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 2.1 lmp-v: 4.1 sub-v: 2209 hci-v: 4.1 rev: 1fc Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 126.63 GiB used: 11.91 GiB (9.4%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL16G size: 14.84 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB model: TO Exter nal USB 3.0 size: 111.79 GiB block-size: physical: 512 B logical: 512 B rev: 0204 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 14.54 GiB size: 14.3 GiB (98.31%) used: 2.71 GiB (18.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: d065e631-6b9d-48c0-a8fe-e663b42828e0 ID-2: /boot raw-size: 292 MiB size: 42.2 MiB (14.46%) used: 24.6 MiB (58.2%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 16D2-035F ID-3: /home//pi-timolo/media raw-size: 111.79 GiB size: 111.79 GiB (100.00%) used: 9.18 GiB (8.2%) fs: ntfs block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: tabula uuid: 72B244DF6F7A1298 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Device-2: 1-1.3:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 0080:a001 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 977 lib: 606 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 129 1: cpu: 4.3% command: init pid: 1 mem: 8.10 MiB (1.0%) 2: cpu: 1.2% command: [kworker/0:2-events] pid: 103 mem: 0.00 MiB (0.0%) 3: cpu: 1.1% command: [kworker/u8:1-brcmf_wq/mmc1:0001:1] pid: 85 mem: 0.00 MiB (0.0%) 4: cpu: 1.0% command: [kworker/1:3-events] pid: 76 mem: 0.00 MiB (0.0%) 5: cpu: 0.9% command: [kworker/2:1-mm_percpu_wq] pid: 34 mem: 0.00 MiB (0.0%) Memory top: 5 of 129 1: mem: 8.10 MiB (1.0%) command: init pid: 1 cpu: 4.3% 2: mem: 7.02 MiB (0.9%) command: systemd pid: 822 cpu: 0.1% 3: mem: 6.59 MiB (0.8%) command: sshd: pid: 846 cpu: 0.1% 4: mem: 6.54 MiB (0.8%) command: systemd-journald pid: 117 cpu: 0.2% 5: mem: 5.65 MiB (0.7%) command: systemd-logind pid: 357 cpu: 0.1% Info: Processes: 129 Uptime: 4m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.04

inxi Results

System:    Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=72895765-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 1001.8 MiB used: 384.4 MiB (38.4%) gpu: 256 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 4 bogomips: 230 
           Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: 80x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:3f300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 
           IF: eth0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 2.1 lmp-v: 4.1 
           sub-v: 2209 hci-v: 4.1 rev: 1fc 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 126.63 GiB used: 11.91 GiB (9.4%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL16G size: 14.84 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB model: TO Exter nal USB 3.0 size: 111.79 GiB 
           block-size: physical: 512 B logical: 512 B rev: 0204 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 14.54 GiB size: 14.3 GiB (98.31%) used: 2.71 GiB (18.9%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs 
           uuid: d065e631-6b9d-48c0-a8fe-e663b42828e0 
           ID-2: /boot raw-size: 292 MiB size: 42.2 MiB (14.46%) used: 24.6 MiB (58.2%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 16D2-035F 
           ID-3: /home//pi-timolo/media raw-size: 111.79 GiB size: 111.79 GiB (100.00%) 
           used: 9.18 GiB (8.2%) fs: ntfs block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 
           label: tabula uuid: 72B244DF6F7A1298 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 0424:9514 class-ID: 0900 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 0424:ec00 class-ID: ff00 
           Device-2: 1-1.3:4 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 0080:a001 class-ID: 0806 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 977 lib: 606 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 129 
           1: cpu: 4.3% command: init pid: 1 mem: 8.10 MiB (1.0%) 
           2: cpu: 1.2% command: [kworker/0:2-events] pid: 103 mem: 0.00 MiB (0.0%) 
           3: cpu: 1.1% command: [kworker/u8:1-brcmf_wq/mmc1:0001:1] pid: 85 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.0% command: [kworker/1:3-events] pid: 76 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.9% command: [kworker/2:1-mm_percpu_wq] pid: 34 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 129 
           1: mem: 8.10 MiB (1.0%) command: init pid: 1 cpu: 4.3% 
           2: mem: 7.02 MiB (0.9%) command: systemd pid: 822 cpu: 0.1% 
           3: mem: 6.59 MiB (0.8%) command: sshd: pid: 846 cpu: 0.1% 
           4: mem: 6.54 MiB (0.8%) command: systemd-journald pid: 117 cpu: 0.2% 
           5: mem: 5.65 MiB (0.7%) command: systemd-logind pid: 357 cpu: 0.1% 
Info:      Processes: 129 Uptime: 4m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.04

Benchmark #47639 - Brand: SanDisk SD Ultra (SL16G)