Benchmark #48021 - pibenchmarks.com

Brand: SanDisk Extreme Go USB
USB Flash
#172 / 1,679
101
#1,396 / 1,679
#37 / 94
#38 / 89
1,052
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-07-19 05:56:28
#48,021
243
-809 (-332.92%)
Anonymous
SanDisk Extreme Go 64GB on Pi4 as rootfs

Storage Details
SanDisk Extreme Go USB
USB Flash
58.2G
USB Flash
SanDisk
Extreme
3.00
5,000
0781:558b
0x0781 (SanDisk Corp.)
0x558b
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Manjaro ARM
aarch64

Benchmark Results
1.4 MB/s
122.58 MB/s
27.69 MB/s
149 IOPS
1,159 IOPS
596 KB/s
4,636 KB/s
912,251 KB/s
1,412 KB/s
740,245 KB/s
1,193 KB/s

inxi Results
System: Kernel: 5.12.15-1-MANJARO-ARM aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 root=PARTUUID=c03223a5-02 rw rootwait console=ttyS0,115200 console=tty3 selinux=0 plymouth.ignore-serial-consoles smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop usbhid.mousepoll=8 snd-bcm2835.enable_compat_alsa=0 audit=0 rootflags=data=journal Console: N/A Distro: Manjaro ARM base: Arch Linux Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.88 GiB used: 585.4 MiB (30.4%) gpu: 64 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.12.15-1-MANJARO-ARM running: yes Sound Server-2: PulseAudio v: 14.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-1: br-4e445322164e state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: veth3c95ef5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth4225933 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethb73ce79 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethff52eba state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethff972b7 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Logical: Missing: Required tool lvs not installed. Check --recommends RAID: Message: No RAID data found. Drives: Local Storage: total: 58.44 GiB used: 17.95 GiB (30.7%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme size: 58.44 GiB block-size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR Message: No optical or floppy data found. Partition: ID-1: / raw-size: 58.19 GiB size: 57.26 GiB (98.42%) used: 17.89 GiB (31.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: ROOT_MNJRO uuid: 2b97478e-20fc-4e87-820e-708382fe6c5d ID-2: /boot raw-size: 256 MiB size: 255.7 MiB (99.89%) used: 58.1 MiB (22.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: BOOT_MNJRO uuid: 980A-B3A2 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: zram size: 2.72 GiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: SanDisk Extreme type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 0781:558b class-ID: 0806 Sensors: System Temperatures: cpu: 55.0 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pacman: 380 lib: 89 Active pacman repo servers in: /etc/pacman.d/mirrorlist 1: https: //manjaro.moson.eu/arm-testing/$repo/$arch 2: https: //mirror.23media.com/manjaro/arm-testing/$repo/$arch 3: https: //manjaro.moson.org/arm-testing/$repo/$arch 4: http: //ftp.tu-chemnitz.de/pub/linux/manjaro/arm-testing/$repo/$arch 5: https: //mirror.alpix.eu/manjaro/arm-testing/$repo/$arch 6: https: //mirror.netcologne.de/manjaro/arm-testing/$repo/$arch 7: https: //ftp.gwdg.de/pub/linux/manjaro/arm-testing/$repo/$arch 8: https: //manjaro.re/arm-testing/$repo/$arch Processes: CPU top: 5 of 187 1: cpu: 1.6% command: bash pid: 7033 mem: 3.67 MiB (0.1%) 2: cpu: 0.8% command: syncthing pid: 469 mem: 48.0 MiB (2.5%) 3: cpu: 0.8% command: uvicorn started by: python pid: 2443 mem: 100.7 MiB (5.4%) 4: cpu: 0.6% command: traefik pid: 1082 mem: 55.3 MiB (2.9%) 5: cpu: 0.6% command: octoprint started by: python pid: 2160 mem: 62.6 MiB (3.3%) Memory top: 5 of 187 1: mem: 100.7 MiB (5.4%) command: uvicorn started by: python pid: 2443 cpu: 0.8% 2: mem: 74.4 MiB (4.0%) command: dockerd pid: 460 cpu: 0.4% 3: mem: 62.6 MiB (3.3%) command: octoprint started by: python pid: 2160 cpu: 0.6% 4: mem: 55.3 MiB (2.9%) command: traefik pid: 1082 cpu: 0.6% 5: mem: 48.0 MiB (2.5%) command: syncthing pid: 469 cpu: 0.8% Info: Processes: 187 Uptime: 22m Init: systemd v: 249 tool: systemctl Compilers: gcc: 10.2.0 Client: shell wrapper v: 5.1.8-release inxi: 3.3.05

inxi Results

System:    Kernel: 5.12.15-1-MANJARO-ARM aarch64 bits: 64 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 root=PARTUUID=c03223a5-02 rw rootwait console=ttyS0,115200 
           console=tty3 selinux=0 plymouth.ignore-serial-consoles smsc95xx.turbo_mode=N 
           dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop usbhid.mousepoll=8 
           snd-bcm2835.enable_compat_alsa=0 audit=0 rootflags=data=journal 
           Console: N/A Distro: Manjaro ARM base: Arch Linux 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 1.88 GiB used: 585.4 MiB (30.4%) gpu: 64 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.12.15-1-MANJARO-ARM running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: no 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-1: br-4e445322164e state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: veth3c95ef5 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth4225933 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: vethb73ce79 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethff52eba state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethff972b7 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
Logical:   Missing: Required tool lvs not installed. Check --recommends 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 58.44 GiB used: 17.95 GiB (30.7%) 
           SMART Message: Required tool smartctl not installed. Check --recommends 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme size: 58.44 GiB 
           block-size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 58.19 GiB size: 57.26 GiB (98.42%) used: 17.89 GiB (31.2%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: ROOT_MNJRO 
           uuid: 2b97478e-20fc-4e87-820e-708382fe6c5d 
           ID-2: /boot raw-size: 256 MiB size: 255.7 MiB (99.89%) used: 58.1 MiB (22.7%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: BOOT_MNJRO uuid: 980A-B3A2 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: zram size: 2.72 GiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: SanDisk Extreme type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 0781:558b class-ID: 0806 
           Sensors:   System Temperatures: cpu: 55.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: pacman: 380 lib: 89 
           Active pacman repo servers in: /etc/pacman.d/mirrorlist 
           1: https: //manjaro.moson.eu/arm-testing/$repo/$arch
           2: https: //mirror.23media.com/manjaro/arm-testing/$repo/$arch
           3: https: //manjaro.moson.org/arm-testing/$repo/$arch
           4: http: //ftp.tu-chemnitz.de/pub/linux/manjaro/arm-testing/$repo/$arch
           5: https: //mirror.alpix.eu/manjaro/arm-testing/$repo/$arch
           6: https: //mirror.netcologne.de/manjaro/arm-testing/$repo/$arch
           7: https: //ftp.gwdg.de/pub/linux/manjaro/arm-testing/$repo/$arch
           8: https: //manjaro.re/arm-testing/$repo/$arch
Processes: CPU top: 5 of 187 
           1: cpu: 1.6% command: bash pid: 7033 mem: 3.67 MiB (0.1%) 
           2: cpu: 0.8% command: syncthing pid: 469 mem: 48.0 MiB (2.5%) 
           3: cpu: 0.8% command: uvicorn started by: python pid: 2443 mem: 100.7 MiB (5.4%) 
           4: cpu: 0.6% command: traefik pid: 1082 mem: 55.3 MiB (2.9%) 
           5: cpu: 0.6% command: octoprint started by: python pid: 2160 mem: 62.6 MiB (3.3%) 
           Memory top: 5 of 187 
           1: mem: 100.7 MiB (5.4%) command: uvicorn started by: python pid: 2443 cpu: 0.8% 
           2: mem: 74.4 MiB (4.0%) command: dockerd pid: 460 cpu: 0.4% 
           3: mem: 62.6 MiB (3.3%) command: octoprint started by: python pid: 2160 cpu: 0.6% 
           4: mem: 55.3 MiB (2.9%) command: traefik pid: 1082 cpu: 0.6% 
           5: mem: 48.0 MiB (2.5%) command: syncthing pid: 469 cpu: 0.8% 
Info:      Processes: 187 Uptime: 22m Init: systemd v: 249 tool: systemctl Compilers: gcc: 10.2.0 
           Client: shell wrapper v: 5.1.8-release inxi: 3.3.05

Benchmark #48021 - Brand: SanDisk Extreme Go USB