Benchmark #48038 - pibenchmarks.com

Brand: SanDisk Extreme Go USB
USB Flash
#173 / 1,679
101
#1,396 / 1,679
#37 / 94
#38 / 89
1,052
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-07-19 12:38:00
#48,038
512
-540 (-105.47%)
Anonymous
SanDisk Extreme Go 64GB on Pi4 as rootfs with btrfs

Storage Details
SanDisk Extreme Go USB
USB Flash
USB Flash
SanDisk
Extreme
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Manjaro ARM
aarch64

Benchmark Results
14.1 MB/s
92 IOPS
936 IOPS
371 KB/s
3,745 KB/s
12,657 KB/s
369 KB/s
3,966 KB/s
331 KB/s

inxi Results
System: Kernel: 5.12.10-1-MANJARO-ARM aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 root=PARTUUID=abb313bd-02 rootflags=subvol=@ rw rootwait console=ttyS0,115200 console=tty3 selinux=0 quiet plymouth.ignore-serial-consoles smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop usbhid.mousepoll=8 snd-bcm2835.enable_compat_alsa=0 audit=0 Console: N/A Distro: Manjaro ARM base: Arch Linux Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.88 GiB used: 578.3 MiB (30.1%) gpu: 64 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1100 2: 1100 3: 1100 4: 1100 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.12.10-1-MANJARO-ARM running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-1: br-3596ca643398 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: veth1cffef3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth305c0ea state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethc7bc8d5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethddab292 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethf619a46 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Logical: Missing: Required tool lvs not installed. Check --recommends RAID: Message: No RAID data found. Drives: Local Storage: total: 58.44 GiB used: 10.25 GiB (17.5%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme size: 58.44 GiB block-size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR Message: No optical or floppy data found. Partition: ID-1: / raw-size: 58.2 GiB size: 58.2 GiB (100.00%) used: 10.2 GiB (17.5%) fs: btrfs block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: ROOT_MNJRO uuid: 108bc7ea-f06f-41f2-a2c2-4c21c72fd72c ID-2: /boot raw-size: 213.6 MiB size: 213.4 MiB (99.89%) used: 52.7 MiB (24.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: BOOT_MNJRO uuid: CAE3-B933 ID-3: /home raw-size: 58.2 GiB size: 58.2 GiB (100.00%) used: 10.2 GiB (17.5%) fs: btrfs block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: ROOT_MNJRO uuid: 108bc7ea-f06f-41f2-a2c2-4c21c72fd72c Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: zram size: 2.72 GiB used: 13 MiB (0.5%) priority: 100 dev: /dev/zram0 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: SanDisk Extreme type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 0781:558b class-ID: 0806 Sensors: System Temperatures: cpu: 57.5 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pacman: 279 lib: 54 Active pacman repo servers in: /etc/pacman.d/mirrorlist 1: https: //mirror.23media.com/manjaro/arm-stable/$repo/$arch 2: https: //manjaro.moson.eu/arm-stable/$repo/$arch 3: https: //manjaro.moson.org/arm-stable/$repo/$arch 4: https: //manjaro.re/arm-stable/$repo/$arch 5: https: //ftp.halifax.rwth-aachen.de/manjaro/arm-stable/$repo/$arch 6: http: //ftp.tu-chemnitz.de/pub/linux/manjaro/arm-stable/$repo/$arch 7: https: //mirror.netcologne.de/manjaro/arm-stable/$repo/$arch 8: https: //mirror.atysleaks.org/manjaro/arm-stable/$repo/$arch 9: https: //mirror.alpix.eu/manjaro/arm-stable/$repo/$arch 10: https: //ftp.gwdg.de/pub/linux/manjaro/arm-stable/$repo/$arch Processes: CPU top: 5 of 216 1: cpu: 5.4% command: dockerd pid: 479 mem: 77.5 MiB (4.1%) 2: cpu: 2.9% command: htop pid: 11815 mem: 6.29 MiB (0.3%) 3: cpu: 1.1% command: octoprint started by: python pid: 12640 mem: 62.5 MiB (3.3%) 4: cpu: 0.9% command: [kworker/u8:9-btrfs-endio-write] pid: 15510 mem: 0.00 MiB (0.0%) 5: cpu: 0.8% command: [kworker/u8:4-btrfs-endio] pid: 13540 mem: 0.00 MiB (0.0%) Memory top: 5 of 216 1: mem: 101.1 MiB (5.4%) command: uvicorn started by: python pid: 5612 cpu: 0.3% 2: mem: 77.5 MiB (4.1%) command: dockerd pid: 479 cpu: 5.4% 3: mem: 62.5 MiB (3.3%) command: octoprint started by: python pid: 12640 cpu: 1.1% 4: mem: 58.3 MiB (3.1%) command: traefik pid: 1212 cpu: 0.3% 5: mem: 28.1 MiB (1.5%) command: radicale started by: python pid: 11128 cpu: 0.0% Info: Processes: 216 Uptime: 1h 50m Init: systemd v: 248 tool: systemctl Compilers: gcc: 10.2.0 Client: shell wrapper v: 5.1.8-release inxi: 3.3.05

inxi Results

System:    Kernel: 5.12.10-1-MANJARO-ARM aarch64 bits: 64 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 root=PARTUUID=abb313bd-02 rootflags=subvol=@ rw rootwait 
           console=ttyS0,115200 console=tty3 selinux=0 quiet plymouth.ignore-serial-consoles 
           smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop 
           usbhid.mousepoll=8 snd-bcm2835.enable_compat_alsa=0 audit=0 
           Console: N/A Distro: Manjaro ARM base: Arch Linux 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 1.88 GiB used: 578.3 MiB (30.1%) gpu: 64 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1100 2: 1100 3: 1100 4: 1100 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.12.10-1-MANJARO-ARM running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-1: br-3596ca643398 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: veth1cffef3 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth305c0ea state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: vethc7bc8d5 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethddab292 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethf619a46 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
Logical:   Missing: Required tool lvs not installed. Check --recommends 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 58.44 GiB used: 10.25 GiB (17.5%) 
           SMART Message: Required tool smartctl not installed. Check --recommends 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Extreme size: 58.44 GiB 
           block-size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 58.2 GiB size: 58.2 GiB (100.00%) used: 10.2 GiB (17.5%) fs: btrfs 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: ROOT_MNJRO 
           uuid: 108bc7ea-f06f-41f2-a2c2-4c21c72fd72c 
           ID-2: /boot raw-size: 213.6 MiB size: 213.4 MiB (99.89%) used: 52.7 MiB (24.7%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: BOOT_MNJRO 
           uuid: CAE3-B933 
           ID-3: /home raw-size: 58.2 GiB size: 58.2 GiB (100.00%) used: 10.2 GiB (17.5%) 
           fs: btrfs block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: ROOT_MNJRO 
           uuid: 108bc7ea-f06f-41f2-a2c2-4c21c72fd72c 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: zram size: 2.72 GiB used: 13 MiB (0.5%) priority: 100 
           dev: /dev/zram0 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: SanDisk Extreme type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 0781:558b class-ID: 0806 
           Sensors:   System Temperatures: cpu: 57.5 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: pacman: 279 lib: 54 
           Active pacman repo servers in: /etc/pacman.d/mirrorlist 
           1: https: //mirror.23media.com/manjaro/arm-stable/$repo/$arch
           2: https: //manjaro.moson.eu/arm-stable/$repo/$arch
           3: https: //manjaro.moson.org/arm-stable/$repo/$arch
           4: https: //manjaro.re/arm-stable/$repo/$arch
           5: https: //ftp.halifax.rwth-aachen.de/manjaro/arm-stable/$repo/$arch
           6: http: //ftp.tu-chemnitz.de/pub/linux/manjaro/arm-stable/$repo/$arch
           7: https: //mirror.netcologne.de/manjaro/arm-stable/$repo/$arch
           8: https: //mirror.atysleaks.org/manjaro/arm-stable/$repo/$arch
           9: https: //mirror.alpix.eu/manjaro/arm-stable/$repo/$arch
           10: https: //ftp.gwdg.de/pub/linux/manjaro/arm-stable/$repo/$arch
Processes: CPU top: 5 of 216 
           1: cpu: 5.4% command: dockerd pid: 479 mem: 77.5 MiB (4.1%) 
           2: cpu: 2.9% command: htop pid: 11815 mem: 6.29 MiB (0.3%) 
           3: cpu: 1.1% command: octoprint started by: python pid: 12640 mem: 62.5 MiB (3.3%) 
           4: cpu: 0.9% command: [kworker/u8:9-btrfs-endio-write] pid: 15510 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.8% command: [kworker/u8:4-btrfs-endio] pid: 13540 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 216 
           1: mem: 101.1 MiB (5.4%) command: uvicorn started by: python pid: 5612 cpu: 0.3% 
           2: mem: 77.5 MiB (4.1%) command: dockerd pid: 479 cpu: 5.4% 
           3: mem: 62.5 MiB (3.3%) command: octoprint started by: python pid: 12640 cpu: 1.1% 
           4: mem: 58.3 MiB (3.1%) command: traefik pid: 1212 cpu: 0.3% 
           5: mem: 28.1 MiB (1.5%) command: radicale started by: python pid: 11128 cpu: 0.0% 
Info:      Processes: 216 Uptime: 1h 50m Init: systemd v: 248 tool: systemctl Compilers: 
           gcc: 10.2.0 Client: shell wrapper v: 5.1.8-release inxi: 3.3.05

Benchmark #48038 - Brand: SanDisk Extreme Go USB