Benchmark #48089 - pibenchmarks.com

Brand: Teelkoou 2.5" SSD
SSD (2.5" SATA)
#1,173 / 1,539
1
#166 / 1,539
#160 / 875
#5 / 363
9,296
	AliExpress

Overview
2021-07-21 09:57:56
#48,089
9,296
0 (0.00%)
Anonymous
Noname SSD in a Noname SATA to USB adaptor

Storage Details
Teelkoou 2.5" SSD
SSD (2.5" SATA)
120G
SSD
Teelkoou
120G
2.5 inch
SATA
3.10
5,000
2109:0715
0x2109
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
131 MB/s
288.76 MB/s
238.51 MB/s
20,000 IOPS
29,049 IOPS
80,000 KB/s
116,198 KB/s
34,583 KB/s
27,972 KB/s
21,378 KB/s
33,123 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_COLLATE = "C", LANG = "en_AU.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 5.10.0-7-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x14a856bd bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: tty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.63 GiB used: 345.1 MiB (4.4%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? resolution: Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-7-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 995.5 MiB (0.9%) ID-1: /dev/sda maj-min: 8:0 type: USB model: USB3.1 Type-c drive model: 120G size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: 2210 drive rev: XKR905 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 5 hrs cycles: 11 read: 8.8 MiB written: 8.6 MiB Pre-Fail: reallocated sector: 100 threshold: 50 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.5 GiB size: 109.83 GiB (98.50%) used: 922.2 MiB (0.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 334be6b7-669f-44d7-b1d5-ca489f5344f3 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.94%) used: 73.3 MiB (24.8%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 1F88-9DD1 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: VIA Labs VL817 SATA Adaptor type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 2109:0715 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 300 lib: 177 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Processes: CPU top: 5 of 116 1: cpu: 0.8% command: init pid: 1 mem: 9.87 MiB (0.1%) 2: cpu: 0.6% command: smartd pid: 1679 mem: 5.32 MiB (0.0%) 3: cpu: 0.3% command: [kworker/u8:1-ext4-rsv-conversion] pid: 678 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: [kworker/3:2+events_freezable] pid: 132 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: bash pid: 658 mem: 2.88 MiB (0.0%) Memory top: 5 of 116 1: mem: 10.7 MiB (0.1%) command: systemd-journald pid: 211 cpu: 0.0% 2: mem: 9.87 MiB (0.1%) command: init pid: 1 cpu: 0.8% 3: mem: 7.74 MiB (0.0%) command: sshd: pid: 476 cpu: 0.0% 4: mem: 7.32 MiB (0.0%) command: systemd pid: 479 cpu: 0.0% 5: mem: 6.50 MiB (0.0%) command: sshd started by: sshd: pid: 473 cpu: 0.0% Info: Processes: 116 Uptime: 14m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.05

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_COLLATE = "C",
	LANG = "en_AU.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Kernel: 5.10.0-7-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x14a856bd 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw 
           fsck.repair=yes net.ifnames=0 rootwait 
           Console: tty pts/0 Distro: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.63 GiB used: 345.1 MiB (4.4%) 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Display: server: No display server data found. Headless machine? 
           resolution:  
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.0-7-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 111.79 GiB used: 995.5 MiB (0.9%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB model: USB3.1 Type-c drive model: 120G 
           size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rotation: SSD rev: 2210 drive rev: XKR905 
           temp: 40 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 5 hrs cycles: 11 read: 8.8 MiB 
           written: 8.6 MiB Pre-Fail: reallocated sector: 100 threshold: 50 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 111.5 GiB size: 109.83 GiB (98.50%) used: 922.2 MiB (0.8%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: 334be6b7-669f-44d7-b1d5-ca489f5344f3 
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.94%) used: 73.3 MiB (24.8%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 1F88-9DD1 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: VIA Labs VL817 SATA Adaptor type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 2109:0715 class-ID: 0806 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 300 lib: 177 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
Processes: CPU top: 5 of 116 
           1: cpu: 0.8% command: init pid: 1 mem: 9.87 MiB (0.1%) 
           2: cpu: 0.6% command: smartd pid: 1679 mem: 5.32 MiB (0.0%) 
           3: cpu: 0.3% command: [kworker/u8:1-ext4-rsv-conversion] pid: 678 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: [kworker/3:2+events_freezable] pid: 132 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: bash pid: 658 mem: 2.88 MiB (0.0%) 
           Memory top: 5 of 116 
           1: mem: 10.7 MiB (0.1%) command: systemd-journald pid: 211 cpu: 0.0% 
           2: mem: 9.87 MiB (0.1%) command: init pid: 1 cpu: 0.8% 
           3: mem: 7.74 MiB (0.0%) command: sshd: pid: 476 cpu: 0.0% 
           4: mem: 7.32 MiB (0.0%) command: systemd pid: 479 cpu: 0.0% 
           5: mem: 6.50 MiB (0.0%) command: sshd started by: sshd: pid: 473 cpu: 0.0% 
Info:      Processes: 116 Uptime: 14m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: 
           gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.05

Benchmark #48089 - Brand: Teelkoou 2.5" SSD