Benchmark #4812 - pibenchmarks.com

Brand: Samsung SD EVO (00000)
C10 U1
#26 / 1,679
569
#1,403 / 1,679
#257 / 394
1,036
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-07 02:06:13
#4,812
595
-441 (-74.12%)
Anonymous

Secure Digital (SD) Card Details
Samsung SD EVO (00000)
C10 U1
119.5G
SD
Samsung
00000
SDXC
3.00
0x1b
SM
1.0
09/2016
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
13 MB/s
40.25 MB/s
40.78 MB/s
152 IOPS
1,520 IOPS
608 KB/s
6,080 KB/s
5,409 KB/s
1,720 KB/s
5,319 KB/s
1,025 KB/s

inxi Results
System: Host: lavrorpi-pxe Kernel: 4.19.85-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 320.7 MiB (8.1%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 125x91 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.85-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 119.75 GiB used: 77.39 GiB (64.6%) ID-1: /dev/mmcblk0 model: 00000 size: 119.75 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.50 GiB size: 117.62 GiB (98.43%) used: 77.34 GiB (65.8%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.1 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 1: deb http: //giteduberger.fr rpimonitor/ Processes: CPU top: 5 1: cpu: 7.5% command: [w1_bus_master1] pid: 182 mem: 0.00 MiB (0.0%) 2: cpu: 0.4% command: rpimonitord started by: perl pid: 20861 mem: 8.31 MiB (0.2%) 3: cpu: 0.1% command: snmpd pid: 581 mem: 6.66 MiB (0.1%) 4: cpu: 0.1% command: bash pid: 5440 mem: 2.82 MiB (0.0%) 5: cpu: 0.1% command: packagekitd pid: 5676 mem: 12.8 MiB (0.3%) Memory top: 5 1: mem: 12.8 MiB (0.3%) command: packagekitd pid: 5676 cpu: 0.1% 2: mem: 10.1 MiB (0.2%) command: rpimonitord started by: perl pid: 20860 cpu: 0.0% 3: mem: 9.19 MiB (0.2%) command: smbd pid: 879 cpu: 0.0% 4: mem: 8.48 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3 pid: 571 cpu: 0.0% 5: mem: 8.31 MiB (0.2%) command: rpimonitord started by: perl pid: 20861 cpu: 0.4% Info: Processes: 183 Uptime: 8d 4h 29m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: lavrorpi-pxe Kernel: 4.19.85-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 320.7 MiB (8.1%) gpu: 64.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 125x91 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.85-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 119.75 GiB used: 77.39 GiB (64.6%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 119.75 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.50 GiB size: 117.62 GiB (98.43%) used: 77.34 GiB (65.8%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.1 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/rpimonitor.list 
           1: deb http: //giteduberger.fr rpimonitor/
Processes: CPU top: 5 
           1: cpu: 7.5% command: [w1_bus_master1] pid: 182 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.4% command: rpimonitord started by: perl pid: 20861 mem: 8.31 MiB (0.2%) 
           3: cpu: 0.1% command: snmpd pid: 581 mem: 6.66 MiB (0.1%) 
           4: cpu: 0.1% command: bash pid: 5440 mem: 2.82 MiB (0.0%) 
           5: cpu: 0.1% command: packagekitd pid: 5676 mem: 12.8 MiB (0.3%) 
           Memory top: 5 
           1: mem: 12.8 MiB (0.3%) command: packagekitd pid: 5676 cpu: 0.1% 
           2: mem: 10.1 MiB (0.2%) command: rpimonitord started by: perl pid: 20860 cpu: 0.0% 
           3: mem: 9.19 MiB (0.2%) command: smbd pid: 879 cpu: 0.0% 
           4: mem: 8.48 MiB (0.2%) command: unattended-upgrade-shutdown started by: python3 
           pid: 571 cpu: 0.0% 
           5: mem: 8.31 MiB (0.2%) command: rpimonitord started by: perl pid: 20861 cpu: 0.4% 
Info:      Processes: 183 Uptime: 8d 4h 29m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #4812 - Brand: Samsung SD EVO (00000)