Benchmark #4846 - pibenchmarks.com

Brand: TCSUNBOW X3 Series
SSD (2.5" SATA)
#462 / 1,679
22
#755 / 1,679
#728 / 984
#223 / 370
5,690
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.se Amazon.sg

Overview
2019-12-07 15:06:12
#4,846
7,441
+1,751 (+23.53%)
Dynomutt007
run2

Storage Details
TCSUNBOW X3 Series
SSD (2.5" SATA)
53.2G
SSD
TCSUNBOW
X360GB
2109:0711
0x2109
0x0711 (SMCWUSBT-G (no firmware))
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,750 (+250)
600 (+100)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
206 MB/s
311.51 MB/s
282.49 MB/s
11,682 IOPS
30,430 IOPS
46,731 KB/s
121,723 KB/s
19,216 KB/s
17,497 KB/s
14,688 KB/s
19,924 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.86-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@50,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d5f2a8c2-07 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles usbhid.mousepoll=0 Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 488.1 MiB (24.2%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr resolution: 1920x1080~50Hz Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.86-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 70.33 GiB used: 9.26 GiB (13.2%) ID-1: /dev/mmcblk0 model: SA16G size: 14.43 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: TCSunBow model: X3 60GB size: 55.90 GiB block size: physical: 512 B logical: 512 B rev: S042 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 53.22 GiB size: 52.14 GiB (97.96%) used: 9.16 GiB (17.6%) fs: ext4 block size: 4096 B dev: /dev/sda7 label: root uuid: e7056328-a7db-45a5-8e54-2505758e8599 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.1 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 031D-80B7 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/sda6 label: boot uuid: 031D-80B7 Unmounted: ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: RECOVERY uuid: 3B2C-A135 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 996e8c96-9dba-47d9-b137-733e87951018 ID-4: /dev/mmcblk0p7 size: 11.75 GiB fs: ext4 label: root uuid: e7056328-a7db-45a5-8e54-2505758e8599 ID-5: /dev/sda1 size: 2.39 GiB fs: vfat label: RECOVERY uuid: 3B2C-A135 ID-6: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-7: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 996e8c96-9dba-47d9-b137-733e87951018 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:3 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0711 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list Active apt repos in: /etc/apt/sources.list.d/pms.list 1: deb https: //dev2day.de/pms/ jessie main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.8% command: lxterminal pid: 1673 mem: 49.7 MiB (2.6%) 2: cpu: 0.4% command: xorg pid: 592 mem: 53.0 MiB (2.8%) 3: cpu: 0.4% command: plex pid: 654 mem: 29.8 MiB (1.5%) 4: cpu: 0.3% command: bash pid: 3282 mem: 2.71 MiB (0.1%) 5: cpu: 0.2% command: vncserver-x11-core pid: 492 mem: 31.6 MiB (1.6%) Memory top: 5 1: mem: 99.8 MiB (5.2%) command: pihole-ftl pid: 1137 cpu: 0.2% 2: mem: 53.0 MiB (2.8%) command: xorg pid: 592 cpu: 0.4% 3: mem: 49.7 MiB (2.6%) command: lxterminal pid: 1673 cpu: 0.8% 4: mem: 38.3 MiB (2.0%) command: plex pid: 536 cpu: 0.1% 5: mem: 31.6 MiB (1.6%) command: vncserver-x11-core pid: 492 cpu: 0.2% Info: Processes: 172 Uptime: 45m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.86-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@50,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d5f2a8c2-07 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles usbhid.mousepoll=0 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 488.1 MiB (24.2%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: modesetting unloaded: fbdev compositor: xcompmgr 
           resolution: 1920x1080~50Hz 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.86-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 70.33 GiB used: 9.26 GiB (13.2%) 
           ID-1: /dev/mmcblk0 model: SA16G size: 14.43 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: TCSunBow model: X3 60GB size: 55.90 GiB block size: 
           physical: 512 B logical: 512 B rev: S042 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 53.22 GiB size: 52.14 GiB (97.96%) used: 9.16 GiB (17.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda7 label: root 
           uuid: e7056328-a7db-45a5-8e54-2505758e8599 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.1 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 031D-80B7 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/sda6 label: boot 
           uuid: 031D-80B7 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: RECOVERY uuid: 3B2C-A135 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 996e8c96-9dba-47d9-b137-733e87951018 
           ID-4: /dev/mmcblk0p7 size: 11.75 GiB fs: ext4 label: root 
           uuid: e7056328-a7db-45a5-8e54-2505758e8599 
           ID-5: /dev/sda1 size: 2.39 GiB fs: vfat label: RECOVERY uuid: 3B2C-A135 
           ID-6: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-7: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 996e8c96-9dba-47d9-b137-733e87951018 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:3 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 2109:0711 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           Active apt repos in: /etc/apt/sources.list.d/pms.list 
           1: deb https: //dev2day.de/pms/ jessie main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.8% command: lxterminal pid: 1673 mem: 49.7 MiB (2.6%) 
           2: cpu: 0.4% command: xorg pid: 592 mem: 53.0 MiB (2.8%) 
           3: cpu: 0.4% command: plex pid: 654 mem: 29.8 MiB (1.5%) 
           4: cpu: 0.3% command: bash pid: 3282 mem: 2.71 MiB (0.1%) 
           5: cpu: 0.2% command: vncserver-x11-core pid: 492 mem: 31.6 MiB (1.6%) 
           Memory top: 5 
           1: mem: 99.8 MiB (5.2%) command: pihole-ftl pid: 1137 cpu: 0.2% 
           2: mem: 53.0 MiB (2.8%) command: xorg pid: 592 cpu: 0.4% 
           3: mem: 49.7 MiB (2.6%) command: lxterminal pid: 1673 cpu: 0.8% 
           4: mem: 38.3 MiB (2.0%) command: plex pid: 536 cpu: 0.1% 
           5: mem: 31.6 MiB (1.6%) command: vncserver-x11-core pid: 492 cpu: 0.2% 
Info:      Processes: 172 Uptime: 45m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #4846 - Brand: TCSUNBOW X3 Series