Benchmark #48566 - pibenchmarks.com

Brand: Samsung SD EVO Select (GD4QT)
C10 U3
#134 / 1,539
82
#1,177 / 1,539
#170 / 369
1,170
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-08-03 19:09:22
#48,566
1,274
+104 (+8.16%)
Anonymous
Kingston Digital DataTraveler SE9 32GB USB 2.0 Flash Drive (DTSE9H/32GBZ)

Secure Digital (SD) Card Details
Samsung SD EVO Select (GD4QT)
C10 U3
119G
SD
Samsung
GD4QT
SDXC
3.00
0x1b
SM
3.0
05/2018
Class 10
None
U3
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
25.4 MB/s
34.13 MB/s
38.72 MB/s
759 IOPS
3,398 IOPS
3,037 KB/s
13,594 KB/s
8,100 KB/s
3,520 KB/s
8,027 KB/s
3,691 KB/s

inxi Results
System: Kernel: 5.10.17-v8+ aarch64 bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=1c10c15f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait cgroup_memory=1 cgroup_enable=memory ip=192.168.X.X::192.168.X.X:255.255.X.X:k3s-1.local:eth0:off Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.7 GiB used: 312 MiB (4.0%) gpu: 76 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? resolution: Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v8+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v4: type: secondary dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: no address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.25 GiB used: 1.35 GiB (1.1%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: GD4QT size: 119.25 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 119 GiB size: 117.1 GiB (98.41%) used: 1.31 GiB (1.1%) fs: ext4 block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 7295bbc3-bbc2-4267-9fa0-099e10ef5bf0 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 5DE4-665C Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 533 lib: 272 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 128 1: cpu: 3.7% command: init pid: 1 mem: 8.14 MiB (0.1%) 2: cpu: 0.4% command: systemd-journald pid: 117 mem: 8.72 MiB (0.1%) 3: cpu: 0.3% command: [kworker/0:1h-mmc_complete] pid: 62 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: [kworker/3:1h-kblockd] pid: 89 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: dbus-daemon pid: 372 mem: 2.93 MiB (0.0%) Memory top: 5 of 128 1: mem: 8.72 MiB (0.1%) command: systemd-journald pid: 117 cpu: 0.4% 2: mem: 8.14 MiB (0.1%) command: init pid: 1 cpu: 3.7% 3: mem: 6.42 MiB (0.0%) command: systemd pid: 642 cpu: 0.0% 4: mem: 6.22 MiB (0.0%) command: sshd: pid: 637 cpu: 0.1% 5: mem: 5.74 MiB (0.0%) command: systemd-logind pid: 392 cpu: 0.1% Info: Processes: 128 Uptime: 3m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.17-v8+ aarch64 bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=1c10c15f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait cgroup_memory=1 
           cgroup_enable=memory ip=192.168.X.X::192.168.X.X:255.255.X.X:k3s-1.local:eth0:off 
           Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.7 GiB used: 312 MiB (4.0%) gpu: 76 MiB 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? 
           resolution:  
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v8+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v4:  type: secondary dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: 
           hardware: no software: no address:  
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 119.25 GiB used: 1.35 GiB (1.1%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: GD4QT size: 119.25 GiB 
           block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 119 GiB size: 117.1 GiB (98.41%) used: 1.31 GiB (1.1%) fs: ext4 
           block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs 
           uuid: 7295bbc3-bbc2-4267-9fa0-099e10ef5bf0 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.6 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 5DE4-665C 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 533 lib: 272 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 128 
           1: cpu: 3.7% command: init pid: 1 mem: 8.14 MiB (0.1%) 
           2: cpu: 0.4% command: systemd-journald pid: 117 mem: 8.72 MiB (0.1%) 
           3: cpu: 0.3% command: [kworker/0:1h-mmc_complete] pid: 62 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: [kworker/3:1h-kblockd] pid: 89 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: dbus-daemon pid: 372 mem: 2.93 MiB (0.0%) 
           Memory top: 5 of 128 
           1: mem: 8.72 MiB (0.1%) command: systemd-journald pid: 117 cpu: 0.4% 
           2: mem: 8.14 MiB (0.1%) command: init pid: 1 cpu: 3.7% 
           3: mem: 6.42 MiB (0.0%) command: systemd pid: 642 cpu: 0.0% 
           4: mem: 6.22 MiB (0.0%) command: sshd: pid: 637 cpu: 0.1% 
           5: mem: 5.74 MiB (0.0%) command: systemd-logind pid: 392 cpu: 0.1% 
Info:      Processes: 128 Uptime: 3m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

Benchmark #48566 - Brand: Samsung SD EVO Select (GD4QT)