Benchmark #49091 - pibenchmarks.com

Brand: Apacer AS350 Panther Series
SSD (2.5" SATA)
#286 / 1,665
43
#913 / 1,665
#863 / 977
#301 / 370
4,391
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2021-08-15 15:49:21
#49,091
5,829
+1,438 (+24.67%)
mat
Apacer AS340 SSd on Pi 4 using ASMEDIA SaATA adapter

Storage Details
Apacer AS350 Panther Series
SSD (2.5" SATA)
111.5G
SSD
Apacer
AS340120GB
3.00
5,000
0bda:0711
0x0bda (Realtek Semiconductor Corp.)
0x0711 (SMCWUSBT-G (no firmware))
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
132 MB/s
231.57 MB/s
117.23 MB/s
7,699 IOPS
14,037 IOPS
30,796 KB/s
56,148 KB/s
23,704 KB/s
17,748 KB/s
16,800 KB/s
20,603 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 5.10.52-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=b9020d12-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 1.12 GiB (29.3%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.52-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-eec07b962e42 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: veth74e9a48 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth78fa65e state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vetha62b195 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethcaaaa54 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethf59f34a state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 2.1 lmp-v: 4.1 sub-v: 6119 hci-v: 4.1 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 2.38 TiB used: 1.54 TiB (64.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Apacer model: A S340 120GB size: 111.79 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: R120 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD10SPZX-22Z10T1 size: 931.51 GiB block-size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: HDD rpm: 5400 rev: 04.01A04 temp: 37 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 295d 2h cycles: 166 ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Toshiba model: External USB 3.0 drive model: MK5059GSXP family: 2.5" HDD MK..59GSXP (AF) size: 465.76 GiB block-size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s type: HDD rpm: 5400 rev: 0001 drive rev: GN001U temp: 37 C scheme: GPT SMART: yes state: enabled health: PASSED on: 7y 331d 17h cycles: 402 Pre-Fail: reallocated sector: 100 threshold: 50 ID-4: /dev/sdd maj-min: 8:48 type: USB vendor: Western Digital model: WD10SPZX-22Z10T1 size: 931.51 GiB block-size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: HDD rpm: 5400 rev: 04.01A04 temp: 36 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 291d 12h cycles: 88 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.54 GiB size: 109.76 GiB (98.41%) used: 62.37 GiB (56.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 7295bbc3-bbc2-4267-9fa0-099e10ef5bf0 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 5DE4-665C ID-3: /mnt/usb1 raw-size: 931.51 GiB size: 915.89 GiB (98.32%) used: 715.03 GiB (78.1%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: N/A uuid: ac14ada1-e735-42f6-9ad4-edcb89007989 ID-4: /mnt/usb2 raw-size: 465.76 GiB size: 457.45 GiB (98.22%) used: 187.63 GiB (41.0%) fs: ext4 block-size: 4096 B dev: /dev/sdc1 maj-min: 8:33 label: N/A uuid: d7a29ee9-aa7a-49b1-b6ce-c82106454b80 ID-5: /mnt/usb3 raw-size: 931.51 GiB size: 915.89 GiB (98.32%) used: 611.69 GiB (66.8%) fs: ext4 block-size: 4096 B dev: /dev/sdd1 maj-min: 8:49 label: N/A uuid: 916e305f-afdb-49a2-a016-6bc9e99533e6 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 100 MiB (100.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 0bda:5411 class-ID: 0900 Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-5: 2-2:2 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411 class-ID: 0900 Device-1: 2-2.1:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Device-2: 2-2.2:4 info: Toshiba America External Disk 1.5TB type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 744mA chip-ID: 0480:a006 class-ID: 0806 Device-3: 2-2.3:5 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Device-4: 2-2.4:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 725 lib: 400 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/buster-backports.list 1: deb http: //deb.debian.org/debian buster-backports main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 1: deb [arch=armhf] https: //repo.jellyfin.org/debian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/sonarr.list 1: deb https: //apt.sonarr.tv/debian buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 218 1: cpu: 2.9% command: jellyfin pid: 619 mem: 235.8 MiB (6.1%) 2: cpu: 1.9% command: transmission-daemon pid: 622 mem: 43.6 MiB (1.1%) 3: cpu: 1.9% command: [kworker/u8:4-events_unbound] pid: 26840 mem: 0.00 MiB (0.0%) 4: cpu: 1.9% command: [kworker/u8:5-ext4-rsv-conversion] pid: 26992 mem: 0.00 MiB (0.0%) 5: cpu: 1.7% command: [kworker/u8:1+flush-8:48] pid: 30148 mem: 0.00 MiB (0.0%) Memory top: 5 of 218 1: mem: 235.8 MiB (6.1%) command: jellyfin pid: 619 cpu: 2.9% 2: mem: 156.4 MiB (4.0%) command: mono pid: 620 cpu: 1.5% 3: mem: 107.9 MiB (2.8%) command: radarr pid: 616 cpu: 0.8% 4: mem: 83.0 MiB (2.1%) command: prowlarr pid: 3975 cpu: 0.4% 5: mem: 70.2 MiB (1.8%) command: python3 pid: 12667 cpu: 0.6% Info: Processes: 218 Uptime: 8h 44m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_CTYPE = "UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Kernel: 5.10.52-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=b9020d12-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.82 GiB used: 1.12 GiB (29.3%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.52-v7l+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: br-eec07b962e42 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: veth74e9a48 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth78fa65e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: vetha62b195 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethcaaaa54 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethf59f34a state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 2.1 lmp-v: 4.1 
           sub-v: 6119 hci-v: 4.1 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 2.38 TiB used: 1.54 TiB (64.6%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Apacer model: A S340 120GB 
           size: 111.79 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: R120 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD10SPZX-22Z10T1 
           size: 931.51 GiB block-size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           type: HDD rpm: 5400 rev: 04.01A04 temp: 37 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 295d 2h cycles: 166 
           ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Toshiba model: External USB 3.0 
           drive model: MK5059GSXP family: 2.5" HDD MK..59GSXP (AF) size: 465.76 GiB block-size: 
           physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s type: HDD rpm: 5400 
           rev: 0001 drive rev: GN001U temp: 37 C 
           scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 7y 331d 17h cycles: 402 Pre-Fail: 
           reallocated sector: 100 threshold: 50 
           ID-4: /dev/sdd maj-min: 8:48 type: USB vendor: Western Digital model: WD10SPZX-22Z10T1 
           size: 931.51 GiB block-size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           type: HDD rpm: 5400 rev: 04.01A04 temp: 36 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 291d 12h cycles: 88 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 111.54 GiB size: 109.76 GiB (98.41%) used: 62.37 GiB (56.8%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 7295bbc3-bbc2-4267-9fa0-099e10ef5bf0 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 5DE4-665C 
           ID-3: /mnt/usb1 raw-size: 931.51 GiB size: 915.89 GiB (98.32%) used: 715.03 GiB (78.1%) 
           fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: N/A 
           uuid: ac14ada1-e735-42f6-9ad4-edcb89007989 
           ID-4: /mnt/usb2 raw-size: 465.76 GiB size: 457.45 GiB (98.22%) used: 187.63 GiB (41.0%) 
           fs: ext4 block-size: 4096 B dev: /dev/sdc1 maj-min: 8:33 label: N/A 
           uuid: d7a29ee9-aa7a-49b1-b6ce-c82106454b80 
           ID-5: /mnt/usb3 raw-size: 931.51 GiB size: 915.89 GiB (98.32%) used: 611.69 GiB (66.8%) 
           fs: ext4 block-size: 4096 B dev: /dev/sdd1 maj-min: 8:49 label: N/A 
           uuid: 916e305f-afdb-49a2-a016-6bc9e99533e6 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 100 MiB (100.0%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 1-1.2:3 info: Realtek ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 0bda:5411 
           class-ID: 0900 
           Hub-4: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Hub-5: 2-2:2 info: Realtek ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 0bda:0411 
           class-ID: 0900 
           Device-1: 2-2.1:3 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 174c:55aa class-ID: 0806 Device-2: 2-2.2:4 info: Toshiba America External Disk 1.5TB type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 744mA 
           chip-ID: 0480:a006 class-ID: 0806 Device-3: 2-2.3:5 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.2 
           speed: 5 Gb/s power: 896mA chip-ID: 2109:0711 class-ID: 0806 Device-4: 2-2.4:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 174c:55aa class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 725 lib: 400 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/buster-backports.list 
           1: deb http: //deb.debian.org/debian buster-backports main
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 
           1: deb [arch=armhf] https: //repo.jellyfin.org/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/sonarr.list 
           1: deb https: //apt.sonarr.tv/debian buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 218 
           1: cpu: 2.9% command: jellyfin pid: 619 mem: 235.8 MiB (6.1%) 
           2: cpu: 1.9% command: transmission-daemon pid: 622 mem: 43.6 MiB (1.1%) 
           3: cpu: 1.9% command: [kworker/u8:4-events_unbound] pid: 26840 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.9% command: [kworker/u8:5-ext4-rsv-conversion] pid: 26992 
           mem: 0.00 MiB (0.0%) 
           5: cpu: 1.7% command: [kworker/u8:1+flush-8:48] pid: 30148 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 218 
           1: mem: 235.8 MiB (6.1%) command: jellyfin pid: 619 cpu: 2.9% 
           2: mem: 156.4 MiB (4.0%) command: mono pid: 620 cpu: 1.5% 
           3: mem: 107.9 MiB (2.8%) command: radarr pid: 616 cpu: 0.8% 
           4: mem: 83.0 MiB (2.1%) command: prowlarr pid: 3975 cpu: 0.4% 
           5: mem: 70.2 MiB (1.8%) command: python3 pid: 12667 cpu: 0.6% 
Info:      Processes: 218 Uptime: 8h 44m Init: systemd v: 241 runlevel: 5 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

Benchmark #49091 - Brand: Apacer AS350 Panther Series