Benchmark #49138 - pibenchmarks.com

Brand: SanDisk X110 mSATA
SSD (mSATA)
#451 / 1,672
20
#597 / 1,672
#577 / 983
#22 / 69
6,449
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.se

Overview
2021-08-17 08:40:49
#49,138
7,301
+852 (+11.67%)
pcfreak
SanDisk SD6SB1M-128G-100 on Pi 4 using DeskPi Pro case

Storage Details
SanDisk X110 mSATA
SSD (mSATA)
128G
SSD
SanDisk
SD6SB1M-128G-1006
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Arch Linux ARM
armv7l

Benchmark Results
187 MB/s
291.94 MB/s
242.66 MB/s
10,301 IOPS
17,052 IOPS
41,207 KB/s
68,209 KB/s
31,855 KB/s
21,525 KB/s
17,170 KB/s
24,535 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_COLLATE = "C", LANG = "de_DE.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 5.10.52-8-ARCH armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 root=/dev/sda2 rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 ipv6.disable=1 Console: tty pts/0 DM: LightDM 1.30.0 Distro: Arch Linux ARM Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 241.2 MiB (6.2%) gpu: 64 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 504 Speed: 700 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 700 2: 700 3: 700 4: 700 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.13 driver: loaded: fbturbo tty: 151x41 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.52-8-ARCH running: yes Sound Server-2: JACK v: 1.9.19 running: no Sound Server-3: PulseAudio v: 15.0 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.24 GiB used: 3.62 GiB (3.0%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SD6SB1M-128G-1006 size: 119.24 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR Message: No optical or floppy data found. Partition: ID-1: / raw-size: 119.05 GiB size: 116.62 GiB (97.96%) used: 3.58 GiB (3.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: HCRA uuid: 54e7a15a-7775-4eb8-82f8-05a0a9bfa6ba ID-2: /boot raw-size: 200 MiB size: 199.8 MiB (99.88%) used: 37.8 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: TOOB uuid: AE97-E62A Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-5: 3-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0101 class-ID: 0900 Device-1: 3-1.4:3 info: QinHeng CH340 serial converter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 98mA chip-ID: 1a86:7523 class-ID: ff00 Sensors: System Temperatures: cpu: 51.6 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pacman: 450 lib: 117 Active pacman repo servers in: /etc/pacman.d/mirrorlist 1: http: //de5.mirror.archlinuxarm.org/$arch/$repo 2: http: //de3.mirror.archlinuxarm.org/$arch/$repo 3: http: //de4.mirror.archlinuxarm.org/$arch/$repo 4: http: //eu.mirror.archlinuxarm.org/$arch/$repo 5: http: //hu.mirror.archlinuxarm.org/$arch/$repo 6: http: //de.mirror.archlinuxarm.org/$arch/$repo 7: http: //dk.mirror.archlinuxarm.org/$arch/$repo 8: http: //gr.mirror.archlinuxarm.org/$arch/$repo 9: http: //fl.us.mirror.archlinuxarm.org/$arch/$repo 10: http: //nj.us.mirror.archlinuxarm.org/$arch/$repo 11: http: //il.us.mirror.archlinuxarm.org/$arch/$repo 12: http: //ca.us.mirror.archlinuxarm.org/$arch/$repo 13: http: //sg.mirror.archlinuxarm.org/$arch/$repo 14: http: //za.mirror.archlinuxarm.org/$arch/$repo 15: http: //tw.mirror.archlinuxarm.org/$arch/$repo 16: http: //br.mirror.archlinuxarm.org/$arch/$repo 17: http: //au.mirror.archlinuxarm.org/$arch/$repo 18: http: //mirror.archlinuxarm.org/$arch/$repo Processes: CPU top: 5 of 135 1: cpu: 1.3% command: bash pid: 5772 mem: 2.70 MiB (0.0%) 2: cpu: 1.1% command: init pid: 1 mem: 8.82 MiB (0.2%) 3: cpu: 0.5% command: sudo pid: 5771 mem: 5.13 MiB (0.1%) 4: cpu: 0.4% command: haveged pid: 232 mem: 4.30 MiB (0.1%) 5: cpu: 0.4% command: dirmngr pid: 2759 mem: 16.2 MiB (0.4%) Memory top: 5 of 135 1: mem: 16.6 MiB (0.4%) command: polkitd pid: 321 cpu: 0.0% 2: mem: 16.2 MiB (0.4%) command: dirmngr pid: 2759 cpu: 0.4% 3: mem: 13.9 MiB (0.3%) command: systemd-journald pid: 233 cpu: 0.0% 4: mem: 8.82 MiB (0.2%) command: init pid: 1 cpu: 1.1% 5: mem: 8.12 MiB (0.2%) command: systemd-resolved pid: 271 cpu: 0.0% Info: Processes: 135 Uptime: 9m Init: systemd v: 249 tool: systemctl Compilers: gcc: 10.2.0 Client: shell wrapper v: 5.1.8-release inxi: 3.3.06

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_COLLATE = "C",
	LANG = "de_DE.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Kernel: 5.10.52-8-ARCH armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 root=/dev/sda2 rw rootwait console=ttyS0,115200 console=tty1 
           selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 
           kgdboc=ttyS0,115200 ipv6.disable=1 
           Console: tty pts/0 DM: LightDM 1.30.0 Distro: Arch Linux ARM 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.82 GiB used: 241.2 MiB (6.2%) gpu: 64 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 504 
           Speed: 700 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 700 2: 700 3: 700 4: 700 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.13 driver: loaded: fbturbo tty: 151x41 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.52-8-ARCH running: yes 
           Sound Server-2: JACK v: 1.9.19 running: no 
           Sound Server-3: PulseAudio v: 15.0 running: no 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global 
           WAN IP:  
Bluetooth: Message: No bluetooth data found. 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 119.24 GiB used: 3.62 GiB (3.0%) 
           SMART Message: Required tool smartctl not installed. Check --recommends 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SD6SB1M-128G-1006 
           size: 119.24 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 119.05 GiB size: 116.62 GiB (97.96%) used: 3.58 GiB (3.1%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: HCRA 
           uuid: 54e7a15a-7775-4eb8-82f8-05a0a9bfa6ba 
           ID-2: /boot raw-size: 200 MiB size: 199.8 MiB (99.88%) used: 37.8 MiB (18.9%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: TOOB uuid: AE97-E62A 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge 
           ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-5: 3-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 100mA 
           chip-ID: 1a40:0101 class-ID: 0900 
           Device-1: 3-1.4:3 info: QinHeng CH340 serial converter type:  
           driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 98mA 
           chip-ID: 1a86:7523 class-ID: ff00 
Sensors:   System Temperatures: cpu: 51.6 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: pacman: 450 lib: 117 
           Active pacman repo servers in: /etc/pacman.d/mirrorlist 
           1: http: //de5.mirror.archlinuxarm.org/$arch/$repo
           2: http: //de3.mirror.archlinuxarm.org/$arch/$repo
           3: http: //de4.mirror.archlinuxarm.org/$arch/$repo
           4: http: //eu.mirror.archlinuxarm.org/$arch/$repo
           5: http: //hu.mirror.archlinuxarm.org/$arch/$repo
           6: http: //de.mirror.archlinuxarm.org/$arch/$repo
           7: http: //dk.mirror.archlinuxarm.org/$arch/$repo
           8: http: //gr.mirror.archlinuxarm.org/$arch/$repo
           9: http: //fl.us.mirror.archlinuxarm.org/$arch/$repo
           10: http: //nj.us.mirror.archlinuxarm.org/$arch/$repo
           11: http: //il.us.mirror.archlinuxarm.org/$arch/$repo
           12: http: //ca.us.mirror.archlinuxarm.org/$arch/$repo
           13: http: //sg.mirror.archlinuxarm.org/$arch/$repo
           14: http: //za.mirror.archlinuxarm.org/$arch/$repo
           15: http: //tw.mirror.archlinuxarm.org/$arch/$repo
           16: http: //br.mirror.archlinuxarm.org/$arch/$repo
           17: http: //au.mirror.archlinuxarm.org/$arch/$repo
           18: http: //mirror.archlinuxarm.org/$arch/$repo
Processes: CPU top: 5 of 135 
           1: cpu: 1.3% command: bash pid: 5772 mem: 2.70 MiB (0.0%) 
           2: cpu: 1.1% command: init pid: 1 mem: 8.82 MiB (0.2%) 
           3: cpu: 0.5% command: sudo pid: 5771 mem: 5.13 MiB (0.1%) 
           4: cpu: 0.4% command: haveged pid: 232 mem: 4.30 MiB (0.1%) 
           5: cpu: 0.4% command: dirmngr pid: 2759 mem: 16.2 MiB (0.4%) 
           Memory top: 5 of 135 
           1: mem: 16.6 MiB (0.4%) command: polkitd pid: 321 cpu: 0.0% 
           2: mem: 16.2 MiB (0.4%) command: dirmngr pid: 2759 cpu: 0.4% 
           3: mem: 13.9 MiB (0.3%) command: systemd-journald pid: 233 cpu: 0.0% 
           4: mem: 8.82 MiB (0.2%) command: init pid: 1 cpu: 1.1% 
           5: mem: 8.12 MiB (0.2%) command: systemd-resolved pid: 271 cpu: 0.0% 
Info:      Processes: 135 Uptime: 9m Init: systemd v: 249 tool: systemctl Compilers: gcc: 10.2.0 
           Client: shell wrapper v: 5.1.8-release inxi: 3.3.06

Benchmark #49138 - Brand: SanDisk X110 mSATA