Benchmark #4930 - pibenchmarks.com

Brand: PNY CS1311
SSD (2.5" SATA)
#575 / 1,679
14
#639 / 1,679
#616 / 984
#156 / 370
6,284
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-08 15:17:57
#4,930
1,362
-4,922 (-361.38%)
Anonymous
SSD on Pi3 with USB to SATA bridge

Storage Details
PNY CS1311
SSD (2.5" SATA)
32G
SSD
PNY
CS131132GBSSD
2.5 inch
SATA
2.00
480
05e3:0718
0x05e3
0x0718 (IDE/SATA Adapter)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,000 (-200)
250 (-150)
450

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
14.7 MB/s
24.72 MB/s
25.49 MB/s
1,852 IOPS
1,401 IOPS
7,409 KB/s
5,606 KB/s
8,221 KB/s
6,173 KB/s
5,545 KB/s
6,122 KB/s

inxi Results
System: Host: jeedom Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 991.6 MiB used: 533.3 MiB (53.8%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 256 Speed: 1000 MHz min/max: 600/1000 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 375x25 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: noprefixroute dynamic scope: global IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 37.28 GiB used: 5.80 GiB (15.6%) ID-1: /dev/mmcblk0 model: N/A size: 7.46 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: PNY model: CS13 11 32GB SSD size: 29.82 GiB block size: physical: 512 B logical: 512 B rev: 0009 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.00 GiB size: 13.72 GiB (97.98%) used: 5.61 GiB (40.9%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 8e82c024-2719-4cb3-a0c6-4bb6802f0b4e ID-2: /boot raw size: 41.8 MiB size: 41.1 MiB (98.42%) used: 22.3 MiB (54.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: B60A-B262 ID-3: swap-1 size: 1.82 GiB used: 175.2 MiB (9.4%) fs: swap swappiness: 10 (default 60) cache pressure: 100 (default) dev: /dev/sda3 label: N/A uuid: 71558a9c-f87e-4839-97b6-84dfe61af759 Unmounted: ID-1: /dev/mmcblk0p2 size: 7.42 GiB fs: ext4 label: N/A uuid: 9a7608bd-5bff-4dfc-ac1d-63a956744162 ID-2: /dev/sda2 size: 14.00 GiB fs: ext4 label: N/A uuid: 1da107e0-054a-4257-8dd1-3059f9591e4a USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Hub: 1-1.5:4 info: Terminus FE 2.1 7-port Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0201 Device-2: 1-1.5.2:5 info: Genesys Logic IDE/SATA Adapter type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0718 Device-3: 1-1.5.3:10 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Device-4: 1-1.5.4:7 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi 2: deb [arch=all] http: //apt.izzysoft.de/ubuntu generic universe Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x stretch main 2: deb-src https: //deb.nodesource.com/node_12.x stretch main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 4.2% command: xiaomihomed.py started by: python pid: 13718 mem: 16.4 MiB (1.6%) 2: cpu: 2.9% command: mysqld pid: 906 mem: 187.5 MiB (19.2%) 3: cpu: 2.3% command: rfxcomd.py started by: python pid: 10481 mem: 15.5 MiB (1.5%) 4: cpu: 2.3% command: blead.py started by: python3 pid: 13652 mem: 30.7 MiB (3.1%) 5: cpu: 2.0% command: broadlinkd.py started by: python pid: 1886 mem: 15.2 MiB (1.5%) Memory top: 5 1: mem: 187.5 MiB (19.2%) command: mysqld pid: 906 cpu: 2.9% 2: mem: 41.4 MiB (4.2%) command: jeecron.php started by: php pid: 2024 cpu: 0.0% 3: mem: 40.6 MiB (4.1%) command: squeezeboxserver started by: perl pid: 2412 cpu: 0.1% 4: mem: 30.7 MiB (3.1%) command: blead.py started by: python3 pid: 13652 cpu: 2.3% 5: mem: 28.7 MiB (2.9%) command: jeecron.php started by: php pid: 2067 cpu: 0.1% Info: Processes: 150 Uptime: 6d 4h 42m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

System:    Host: jeedom Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 
           root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 991.6 MiB used: 533.3 MiB (53.8%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 256 
           Speed: 1000 MHz min/max: 600/1000 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 375x25 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: noprefixroute dynamic scope: global 
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 37.28 GiB used: 5.80 GiB (15.6%) 
           ID-1: /dev/mmcblk0 model: N/A size: 7.46 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB vendor: PNY model: CS13 11 32GB SSD size: 29.82 GiB 
           block size: physical: 512 B logical: 512 B rev: 0009 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.00 GiB size: 13.72 GiB (97.98%) used: 5.61 GiB (40.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 8e82c024-2719-4cb3-a0c6-4bb6802f0b4e 
           ID-2: /boot raw size: 41.8 MiB size: 41.1 MiB (98.42%) used: 22.3 MiB (54.2%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: B60A-B262 
           ID-3: swap-1 size: 1.82 GiB used: 175.2 MiB (9.4%) fs: swap swappiness: 10 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda3 label: N/A 
           uuid: 71558a9c-f87e-4839-97b6-84dfe61af759 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.42 GiB fs: ext4 label: N/A 
           uuid: 9a7608bd-5bff-4dfc-ac1d-63a956744162 
           ID-2: /dev/sda2 size: 14.00 GiB fs: ext4 label: N/A 
           uuid: 1da107e0-054a-4257-8dd1-3059f9591e4a 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Hub: 1-1.5:4 info: Terminus FE 2.1 7-port Hub ports: 6 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1a40:0201 
           Device-2: 1-1.5.2:5 info: Genesys Logic IDE/SATA Adapter type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0718 
           Device-3: 1-1.5.3:10 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
           Device-4: 1-1.5.4:7 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           2: deb [arch=all] http: //apt.izzysoft.de/ubuntu generic universe
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x stretch main
           2: deb-src https: //deb.nodesource.com/node_12.x stretch main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 4.2% command: xiaomihomed.py started by: python pid: 13718 mem: 16.4 MiB (1.6%) 
           2: cpu: 2.9% command: mysqld pid: 906 mem: 187.5 MiB (19.2%) 
           3: cpu: 2.3% command: rfxcomd.py started by: python pid: 10481 mem: 15.5 MiB (1.5%) 
           4: cpu: 2.3% command: blead.py started by: python3 pid: 13652 mem: 30.7 MiB (3.1%) 
           5: cpu: 2.0% command: broadlinkd.py started by: python pid: 1886 mem: 15.2 MiB (1.5%) 
           Memory top: 5 
           1: mem: 187.5 MiB (19.2%) command: mysqld pid: 906 cpu: 2.9% 
           2: mem: 41.4 MiB (4.2%) command: jeecron.php started by: php pid: 2024 cpu: 0.0% 
           3: mem: 40.6 MiB (4.1%) command: squeezeboxserver started by: perl pid: 2412 cpu: 0.1% 
           4: mem: 30.7 MiB (3.1%) command: blead.py started by: python3 pid: 13652 cpu: 2.3% 
           5: mem: 28.7 MiB (2.9%) command: jeecron.php started by: php pid: 2067 cpu: 0.1% 
Info:      Processes: 150 Uptime: 6d 4h 42m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 
           alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #4930 - Brand: PNY CS1311