Benchmark #49338 - pibenchmarks.com

Brand: Panasonic SD
A1 C10 U3
#106 / 1,665
140
#1,347 / 1,665
#226 / 389
1,089
	Amazon.com Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.it Amazon.nl

Overview
2021-08-22 08:40:37
#49,338
1,288
+199 (+15.45%)
Anonymous
sanidisk sd

Secure Digital (SD) Card Details
Panasonic SD
A1 C10 U3
55.3G
SD
Panasonic
Y064M
SD
6.00
0x01
PA
1.3
03/2020
Class 10
A1
U3
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
27.2 MB/s
40.44 MB/s
40.51 MB/s
1,028 IOPS
2,634 IOPS
4,113 KB/s
10,537 KB/s
9,510 KB/s
3,554 KB/s
7,655 KB/s
3,675 KB/s

inxi Results
System: Kernel: 5.10.52-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.79 GiB used: 1007.5 MiB (12.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 80x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.52-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 2.1 lmp-v: 4.1 sub-v: 6119 hci-v: 4.1 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 57.94 GiB used: 9.28 GiB (16.0%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Maxtor model: Y064M size: 57.94 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 55.28 GiB size: 54.29 GiB (98.21%) used: 9.23 GiB (17.0%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7 label: root uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: 013C-173E Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 2.37 GiB fs: vfat label: RECOVERY uuid: C23B-D645 ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: 2025 apt: 2021 lib: 939 snap: 4 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 137 1: cpu: 41.7% command: java pid: 3360 mem: 611.2 MiB (7.7%) 2: cpu: 1.3% command: [kworker/u8:2-events_unbound] pid: 9614 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 7300 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: [kworker/0:2h-mmc_complete] pid: 7363 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: bash pid: 7570 mem: 2.71 MiB (0.0%) Memory top: 5 of 137 1: mem: 611.2 MiB (7.7%) command: java pid: 3360 cpu: 41.7% 2: mem: 17.7 MiB (0.2%) command: snapd pid: 355 cpu: 0.0% 3: mem: 15.2 MiB (0.1%) command: fail2ban-server started by: python3 pid: 486 cpu: 0.0% 4: mem: 12.3 MiB (0.1%) command: packagekitd pid: 5059 cpu: 0.0% 5: mem: 8.24 MiB (0.1%) command: init pid: 1 cpu: 0.0% Info: Processes: 137 Uptime: 11h 35m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3+deb10u2 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.52-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.79 GiB used: 1007.5 MiB (12.6%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 80x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.52-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 2.1 lmp-v: 4.1 
           sub-v: 6119 hci-v: 4.1 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: capturing, telephony 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 57.94 GiB used: 9.28 GiB (16.0%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Maxtor model: Y064M size: 57.94 GiB 
           block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 55.28 GiB size: 54.29 GiB (98.21%) used: 9.23 GiB (17.0%) fs: ext4 
           block-size: 4096 B dev: /dev/mmcblk0p7 maj-min: 179:7 label: root 
           uuid: f7ff7b31-cb90-42c0-8ae3-ebd1d04c5890 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48 MiB (19.1%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p6 maj-min: 179:6 label: boot uuid: 013C-173E 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 2.37 GiB fs: vfat label: RECOVERY 
           uuid: C23B-D645 
           ID-2: /dev/mmcblk0p2 maj-min: 179:2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 maj-min: 179:5 size: 32 MiB fs: ext4 label: SETTINGS 
           uuid: c36bde03-dc30-4bbc-af1f-0e297a7c5b9f 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: 2025 apt: 2021 lib: 939 snap: 4 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 137 
           1: cpu: 41.7% command: java pid: 3360 mem: 611.2 MiB (7.7%) 
           2: cpu: 1.3% command: [kworker/u8:2-events_unbound] pid: 9614 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 7300 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: [kworker/0:2h-mmc_complete] pid: 7363 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: bash pid: 7570 mem: 2.71 MiB (0.0%) 
           Memory top: 5 of 137 
           1: mem: 611.2 MiB (7.7%) command: java pid: 3360 cpu: 41.7% 
           2: mem: 17.7 MiB (0.2%) command: snapd pid: 355 cpu: 0.0% 
           3: mem: 15.2 MiB (0.1%) command: fail2ban-server started by: python3 pid: 486 cpu: 0.0% 
           4: mem: 12.3 MiB (0.1%) command: packagekitd pid: 5059 cpu: 0.0% 
           5: mem: 8.24 MiB (0.1%) command: init pid: 1 cpu: 0.0% 
Info:      Processes: 137 Uptime: 11h 35m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
           clang: 7.0.1-8+rpi3+deb10u2 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

Benchmark #49338 - Brand: Panasonic SD