Benchmark #49530 - pibenchmarks.com

Brand: Kingston A400S Series
SSD (2.5" SATA)
#1 / 1,539
2,595
#518 / 1,539
#498 / 875
#141 / 363
6,144
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-08-26 14:33:15
#49,530
6,010
-134 (-2.23%)
Anonymous
Bama2021

Storage Details
Kingston A400S Series
SSD (2.5" SATA)
120G
SSD
Kingston
SA400S37120G
SATA
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
106 MB/s
215.39 MB/s
178.52 MB/s
6,781 IOPS
4,796 IOPS
27,125 KB/s
19,185 KB/s
28,821 KB/s
24,126 KB/s
18,035 KB/s
28,044 KB/s

inxi Results
System: Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: video=HDMI-A-1:640x480M@60 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x85ab78d9 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=174c:55aa:u console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.63 GiB used: 877 MiB (11.2%) RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth00c8533 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth1786167 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth89647bb state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethab30890 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethe093932 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethf2f74eb state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 3.73 GiB (3.3%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SA400S37120G size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s type: SSD rev: S3500104 temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 14d 0h cycles: 600 read: 230 GiB written: 410 GiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.5 GiB size: 109.83 GiB (98.50%) used: 3.61 GiB (3.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 121 MiB (40.5%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 1E48-B72B Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Logitech M105 Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA chip-ID: 046d:c077 class-ID: 0301 Device-2: 1-1.4:4 info: Dell type: Keyboard driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 413c:2107 class-ID: 0301 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 382 lib: 209 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian buster stable Processes: CPU top: 5 of 163 1: cpu: 6.6% command: python3 pid: 3284 mem: 232.4 MiB (2.9%) 2: cpu: 2.7% command: python3 pid: 1313 mem: 92.3 MiB (1.1%) 3: cpu: 2.0% command: init pid: 1 mem: 9.24 MiB (0.1%) 4: cpu: 1.0% command: dockerd pid: 457 mem: 84.6 MiB (1.0%) 5: cpu: 0.6% command: smartd pid: 4588 mem: 4.05 MiB (0.0%) Memory top: 5 of 163 1: mem: 232.4 MiB (2.9%) command: python3 pid: 3284 cpu: 6.6% 2: mem: 92.3 MiB (1.1%) command: python3 pid: 1313 cpu: 2.7% 3: mem: 84.6 MiB (1.0%) command: dockerd pid: 457 cpu: 1.0% 4: mem: 50.8 MiB (0.6%) command: containerd pid: 443 cpu: 0.2% 5: mem: 47.9 MiB (0.6%) command: docker pid: 989 cpu: 0.0% Info: Processes: 163 Uptime: 5m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.9.0-0.bpo.5-arm64 aarch64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: video=HDMI-A-1:640x480M@60 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 
           bcm2709.serial=0x85ab78d9 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 
           bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=174c:55aa:u 
           console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 
           rootwait 
           Console: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.63 GiB used: 877 MiB (11.2%) 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Sound Server-1: ALSA v: k5.9.0-0.bpo.5-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: veth00c8533 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth1786167 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth89647bb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethab30890 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethe093932 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethf2f74eb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 111.79 GiB used: 3.73 GiB (3.3%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SA400S37120G 
           size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           type: SSD rev: S3500104 temp: 32 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 14d 0h cycles: 600 read: 230 GiB 
           written: 410 GiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 111.5 GiB size: 109.83 GiB (98.50%) used: 3.61 GiB (3.3%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 
           ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 121 MiB (40.5%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 1E48-B72B 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.3:3 info: Logitech M105 Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA 
           chip-ID: 046d:c077 class-ID: 0301 
           Device-2: 1-1.4:4 info: Dell type: Keyboard driver: hid-generic,usbhid interfaces: 1 
           rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 413c:2107 class-ID: 0301 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip-ID: 174c:55aa class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 382 lib: 209 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free # raspi 4 needs a kernel and raspi-firmware newer than buster's
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian buster stable
Processes: CPU top: 5 of 163 
           1: cpu: 6.6% command: python3 pid: 3284 mem: 232.4 MiB (2.9%) 
           2: cpu: 2.7% command: python3 pid: 1313 mem: 92.3 MiB (1.1%) 
           3: cpu: 2.0% command: init pid: 1 mem: 9.24 MiB (0.1%) 
           4: cpu: 1.0% command: dockerd pid: 457 mem: 84.6 MiB (1.0%) 
           5: cpu: 0.6% command: smartd pid: 4588 mem: 4.05 MiB (0.0%) 
           Memory top: 5 of 163 
           1: mem: 232.4 MiB (2.9%) command: python3 pid: 3284 cpu: 6.6% 
           2: mem: 92.3 MiB (1.1%) command: python3 pid: 1313 cpu: 2.7% 
           3: mem: 84.6 MiB (1.0%) command: dockerd pid: 457 cpu: 1.0% 
           4: mem: 50.8 MiB (0.6%) command: containerd pid: 443 cpu: 0.2% 
           5: mem: 47.9 MiB (0.6%) command: docker pid: 989 cpu: 0.0% 
Info:      Processes: 163 Uptime: 5m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: 
           gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

Benchmark #49530 - Brand: Kingston A400S Series