Benchmark #49786 - pibenchmarks.com

Brand: Samsung 870 EVO
SSD (2.5" SATA)
#21 / 1,539
429
#364 / 1,539
#350 / 875
#62 / 363
6,997
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-09-01 21:55:43
#49,786
7,529
+532 (+7.07%)
GadgetAngel
SAMSUNG SSD 870 EVO on Pi 4 B using StartTech USB3.0 to 2.5 SSD Adapter Cable

Storage Details
Samsung 870 EVO
SSD (2.5" SATA)
500G
SSD
Samsung
SSD870EVO500GB
2.5 inch
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
184 MB/s
278.05 MB/s
265.38 MB/s
9,869 IOPS
19,212 IOPS
39,479 KB/s
76,848 KB/s
25,311 KB/s
23,865 KB/s
19,502 KB/s
26,183 KB/s

inxi Results
System: Kernel: 5.10.60-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=d2aca17e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty pts/1 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 352.8 MiB (9.0%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 143x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.60-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 465.76 GiB used: 4.36 GiB (0.9%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 870 EVO 500GB size: 465.76 GiB block-size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s type: SSD rev: SVT01B6Q temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 13 written: 6.72 GiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.51 GiB size: 458.2 GiB (98.43%) used: 4.31 GiB (0.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 7295bbc3-bbc2-4267-9fa0-099e10ef5bf0 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: EVOSSDBOOT uuid: 5DE4-665C Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: OpenMoko type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 1d50:614e class-ID: 0a00 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 818 lib: 468 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 145 1: cpu: 6.0% command: screen.py started by: python pid: 665 mem: 91.6 MiB (2.3%) 2: cpu: 5.5% command: init pid: 1 mem: 8.33 MiB (0.2%) 3: cpu: 5.0% command: moonraker.py started by: python pid: 582 mem: 21.6 MiB (0.5%) 4: cpu: 4.5% command: klippy.py started by: python pid: 587 mem: 17.7 MiB (0.4%) 5: cpu: 2.0% command: webcamd started by: bash pid: 1216 mem: 2.66 MiB (0.0%) Memory top: 5 of 145 1: mem: 91.6 MiB (2.3%) command: screen.py started by: python pid: 665 cpu: 6.0% 2: mem: 34.1 MiB (0.8%) command: xorg pid: 592 cpu: 1.0% 3: mem: 21.6 MiB (0.5%) command: moonraker.py started by: python pid: 582 cpu: 5.0% 4: mem: 17.7 MiB (0.4%) command: klippy.py started by: python pid: 587 cpu: 4.5% 5: mem: 8.33 MiB (0.2%) command: init pid: 1 cpu: 5.5% Info: Processes: 145 Uptime: 1m Init: systemd v: 241 runlevel: 5 default: 2 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.60-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=d2aca17e-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty pts/1 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.82 GiB used: 352.8 MiB (9.0%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 143x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.60-v7l+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6119 hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 465.76 GiB used: 4.36 GiB (0.9%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 870 EVO 500GB 
           size: 465.76 GiB block-size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s 
           type: SSD rev: SVT01B6Q temp: 32 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1 hrs cycles: 13 written: 6.72 GiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 465.51 GiB size: 458.2 GiB (98.43%) used: 4.31 GiB (0.9%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 7295bbc3-bbc2-4267-9fa0-099e10ef5bf0 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: EVOSSDBOOT uuid: 5DE4-665C 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.4:3 info: OpenMoko type: Abstract (modem),CDC-Data driver: cdc_acm 
           interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 1d50:614e class-ID: 0a00 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 818 lib: 468 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 145 
           1: cpu: 6.0% command: screen.py started by: python pid: 665 mem: 91.6 MiB (2.3%) 
           2: cpu: 5.5% command: init pid: 1 mem: 8.33 MiB (0.2%) 
           3: cpu: 5.0% command: moonraker.py started by: python pid: 582 mem: 21.6 MiB (0.5%) 
           4: cpu: 4.5% command: klippy.py started by: python pid: 587 mem: 17.7 MiB (0.4%) 
           5: cpu: 2.0% command: webcamd started by: bash pid: 1216 mem: 2.66 MiB (0.0%) 
           Memory top: 5 of 145 
           1: mem: 91.6 MiB (2.3%) command: screen.py started by: python pid: 665 cpu: 6.0% 
           2: mem: 34.1 MiB (0.8%) command: xorg pid: 592 cpu: 1.0% 
           3: mem: 21.6 MiB (0.5%) command: moonraker.py started by: python pid: 582 cpu: 5.0% 
           4: mem: 17.7 MiB (0.4%) command: klippy.py started by: python pid: 587 cpu: 4.5% 
           5: mem: 8.33 MiB (0.2%) command: init pid: 1 cpu: 5.5% 
Info:      Processes: 145 Uptime: 1m Init: systemd v: 241 runlevel: 5 default: 2 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

Benchmark #49786 - Brand: Samsung 870 EVO