Benchmark #4982 - pibenchmarks.com

Brand: Samsung Fit
USB Flash
#117 / 1,700
164
#1,014 / 1,700
#9 / 94
#11 / 89
3,126
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-10 06:27:16
#4,982
2,172
-954 (-43.92%)
Anonymous

Storage Details
Samsung Fit
USB Flash
275G
USB Flash
Samsung
FlashDrive
0xde92
3.00
5,000
1d6b:1000
0x1d6b (Linux Foundation)
0x1000 (Mustek BearPaw 1200 Scanner)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
23.3 MB/s
103 MB/s
117.5 MB/s
2,329 IOPS
2,392 IOPS
9,316 KB/s
9,568 KB/s
13,090 KB/s
8,122 KB/s
9,684 KB/s
10,090 KB/s

inxi Results
System: Host: DietPi Kernel: 4.19.86-v7l+ armv7l bits: 32 compiler: gcc v: 8.3.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 rootdelay=10 root=PARTUUID=8cbe7caf-f6c0-4c59-bf75-d31748026e97 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 827.5 MiB (20.8%) gpu: 512.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 300/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 89.57 GiB used: 6.42 GiB (7.2%) ID-1: /dev/mmcblk0 model: JB1RT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Samsung model: Flash Drive size: 59.75 GiB block size: physical: 512 B logical: 512 B rev: 1100 scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.75 GiB size: 58.57 GiB (98.01%) used: 6.37 GiB (10.9%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: d1dc4b75-dca8-46c7-bf29-28a15e5946d0 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.7 MiB (21.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.56 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: NAble (DataBook) type: driver: px4_drv interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0511:083f Device-2: 1-1.4:4 info: SCM Microsystems SCR331-LC1 / SCR3310 SmartCard Reader type: Smart Card driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 04e6:5116 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-1:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 090c:1000 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/mono-xamarin.list 1: deb https: //download.mono-project.com/repo/debian/ raspbianbuster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 6.4% command: mirakurun: pid: 560 mem: 99.5 MiB (2.8%) 2: cpu: 0.9% command: index.js started by: node pid: 9588 mem: 47.0 MiB (1.3%) 3: cpu: 0.3% command: pm2 pid: 546 mem: 41.6 MiB (1.1%) 4: cpu: 0.2% command: serviceexecutor.js started by: node pid: 9608 mem: 58.3 MiB (1.6%) 5: cpu: 0.1% command: bash pid: 10114 mem: 2.79 MiB (0.0%) Memory top: 5 1: mem: 99.5 MiB (2.8%) command: mirakurun: pid: 560 cpu: 6.4% 2: mem: 58.3 MiB (1.6%) command: serviceexecutor.js started by: node pid: 9608 cpu: 0.2% 3: mem: 47.0 MiB (1.3%) command: index.js started by: node pid: 9588 cpu: 0.9% 4: mem: 41.6 MiB (1.1%) command: pm2 pid: 546 cpu: 0.3% 5: mem: 34.7 MiB (0.9%) command: xsp4.exe started by: mono pid: 319 cpu: 0.0% Info: Processes: 130 Uptime: 5h 26m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: DietPi Kernel: 4.19.86-v7l+ armv7l bits: 32 compiler: gcc v: 8.3.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 rootdelay=10 
           root=PARTUUID=8cbe7caf-f6c0-4c59-bf75-d31748026e97 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait quiet 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 827.5 MiB (20.8%) gpu: 512.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 300/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 89.57 GiB used: 6.42 GiB (7.2%) 
           ID-1: /dev/mmcblk0 model: JB1RT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Samsung model: Flash Drive size: 59.75 GiB block size: 
           physical: 512 B logical: 512 B rev: 1100 scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.75 GiB size: 58.57 GiB (98.01%) used: 6.37 GiB (10.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: d1dc4b75-dca8-46c7-bf29-28a15e5946d0 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 54.7 MiB (21.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.56 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: NAble (DataBook) type:  driver: px4_drv 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0511:083f Device-2: 1-1.4:4 info: SCM Microsystems SCR331-LC1 / SCR3310 SmartCard Reader 
           type: Smart Card driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 04e6:5116 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-1:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 090c:1000 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/mono-xamarin.list 
           1: deb https: //download.mono-project.com/repo/debian/ raspbianbuster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 6.4% command: mirakurun: pid: 560 mem: 99.5 MiB (2.8%) 
           2: cpu: 0.9% command: index.js started by: node pid: 9588 mem: 47.0 MiB (1.3%) 
           3: cpu: 0.3% command: pm2 pid: 546 mem: 41.6 MiB (1.1%) 
           4: cpu: 0.2% command: serviceexecutor.js started by: node pid: 9608 
           mem: 58.3 MiB (1.6%) 
           5: cpu: 0.1% command: bash pid: 10114 mem: 2.79 MiB (0.0%) 
           Memory top: 5 
           1: mem: 99.5 MiB (2.8%) command: mirakurun: pid: 560 cpu: 6.4% 
           2: mem: 58.3 MiB (1.6%) command: serviceexecutor.js started by: node pid: 9608 
           cpu: 0.2% 
           3: mem: 47.0 MiB (1.3%) command: index.js started by: node pid: 9588 cpu: 0.9% 
           4: mem: 41.6 MiB (1.1%) command: pm2 pid: 546 cpu: 0.3% 
           5: mem: 34.7 MiB (0.9%) command: xsp4.exe started by: mono pid: 319 cpu: 0.0% 
Info:      Processes: 130 Uptime: 5h 26m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #4982 - Brand: Samsung Fit