Benchmark #49979 - pibenchmarks.com

Brand: Micro Center USB Flash Drive
USB Flash
#391 / 1,539
18
#1,266 / 1,539
#39 / 90
#39 / 86
1,009
	Amazon.com

Overview
2021-09-06 16:03:27
#49,979
593
-416 (-70.15%)
khalpin11
usb2

Storage Details
Micro Center USB Flash Drive
USB Flash
14.4G
USB Flash
MicroCenter
USBDISK
090c:1000
0x090c
0x1000 (Mustek BearPaw 1200 Scanner)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
ARMv7 v7l
4
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
8.9 MB/s
25.68 MB/s
22.61 MB/s
100 IOPS
1,126 IOPS
403 KB/s
4,504 KB/s
11,508 KB/s
9,520 KB/s
5,060 KB/s
442 KB/s

inxi Results
System: Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=8ec5f196-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1000.2 MiB used: 302.6 MiB (30.3%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 bogomips: 256 Speed: 1000 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 82x26 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: iqaudio-dac driver: snd_rpi_iqaudio_dac bus-ID: N/A chip-ID: iqaudio:soc class-ID: sound Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-3: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:5 chip-ID: 0424:7800 class-ID: ff00 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 14.65 GiB used: 3.01 GiB (20.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SMI (STMicroelectronics) model: USB size: 14.65 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 14.39 GiB size: 14.11 GiB (98.00%) used: 2.96 GiB (21.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.6 MiB (19.3%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7616-4FD8 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 Device-2: 1-1.1.2:4 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 090c:1000 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1416 lib: 707 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 153 1: cpu: 4.5% command: [kworker/2:3-events] pid: 76 mem: 0.00 MiB (0.0%) 2: cpu: 4.1% command: [kworker/2:0+events_freezable] pid: 23 mem: 0.00 MiB (0.0%) 3: cpu: 2.9% command: init pid: 1 mem: 8.14 MiB (0.8%) 4: cpu: 0.9% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 5: cpu: 0.9% command: [kworker/0:4-mm_percpu_wq] pid: 3059 mem: 0.00 MiB (0.0%) Memory top: 5 of 153 1: mem: 56.4 MiB (6.0%) command: zenity pid: 747 cpu: 0.5% 2: mem: 37.4 MiB (4.0%) command: xorg pid: 481 cpu: 0.1% 3: mem: 29.0 MiB (3.1%) command: lxpanel pid: 721 cpu: 0.5% 4: mem: 27.2 MiB (2.9%) command: applet.py started by: python3 pid: 746 cpu: 0.4% 5: mem: 21.8 MiB (2.3%) command: pcmanfm pid: 722 cpu: 0.3% Info: Processes: 153 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.17-v7+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 
           console=ttyS0,115200 console=tty1 root=PARTUUID=8ec5f196-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 1000.2 MiB used: 302.6 MiB (30.3%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 4 bogomips: 256 
           Speed: 1000 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 82x26 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: iqaudio-dac driver: snd_rpi_iqaudio_dac bus-ID: N/A chip-ID: iqaudio:soc 
           class-ID: sound 
           Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-3: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:3f300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:5 
           chip-ID: 0424:7800 class-ID: ff00 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6119 hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 14.65 GiB used: 3.01 GiB (20.6%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SMI (STMicroelectronics) model: USB 
           size: 14.65 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1100 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 14.39 GiB size: 14.11 GiB (98.00%) used: 2.96 GiB (21.0%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.6 MiB (19.3%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7616-4FD8 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 0424:2514 class-ID: 0900 
           Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 
           speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 
           Device-2: 1-1.1.2:4 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           power: 500mA chip-ID: 090c:1000 class-ID: 0806 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1416 lib: 707 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 153 
           1: cpu: 4.5% command: [kworker/2:3-events] pid: 76 mem: 0.00 MiB (0.0%) 
           2: cpu: 4.1% command: [kworker/2:0+events_freezable] pid: 23 mem: 0.00 MiB (0.0%) 
           3: cpu: 2.9% command: init pid: 1 mem: 8.14 MiB (0.8%) 
           4: cpu: 0.9% command: [usb-storage] pid: 79 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.9% command: [kworker/0:4-mm_percpu_wq] pid: 3059 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 153 
           1: mem: 56.4 MiB (6.0%) command: zenity pid: 747 cpu: 0.5% 
           2: mem: 37.4 MiB (4.0%) command: xorg pid: 481 cpu: 0.1% 
           3: mem: 29.0 MiB (3.1%) command: lxpanel pid: 721 cpu: 0.5% 
           4: mem: 27.2 MiB (2.9%) command: applet.py started by: python3 pid: 746 cpu: 0.4% 
           5: mem: 21.8 MiB (2.3%) command: pcmanfm pid: 722 cpu: 0.3% 
Info:      Processes: 153 Uptime: 6m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.06

Benchmark #49979 - Brand: Micro Center USB Flash Drive