Benchmark #49981 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#95 / 1,672
168
#663 / 1,672
#641 / 983
#25 / 69
6,104
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-09-06 16:40:29
#49,981
8,121
+2,017 (+24.84%)
Vthetech
Transcend 64GB SATA III 6Gb/s MSA370 mSATA Solid State Drive (TS64GMSA370)

Storage Details
Transcend MSA Series
SSD (mSATA)
64G
SSD
Transcend
TS64GMSA370
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
74.5 MB/s
328.73 MB/s
244.09 MB/s
21,903 IOPS
30,843 IOPS
87,614 KB/s
123,373 KB/s
34,942 KB/s
22,742 KB/s
18,094 KB/s
26,394 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LANG = "fr_FR.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 5.10.0-8-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x319c79e5 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: tty pts/1 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.7 GiB used: 278.3 MiB (7.3%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 158x19 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-8-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: down mac: IF-ID-2: ztuzey7ixp state: unknown mac: IP v4: scope: global broadcast: IP v6: scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 59.63 GiB used: 1003.3 MiB (1.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Transcend model: TS64GMSA370 family: based SSDs size: 59.63 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: SSD rev: P1225CH1 temp: 42 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 10 read: 544 MiB written: 1.19 GiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.33 GiB size: 58.43 GiB (98.47%) used: 928.1 MiB (1.6%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 75.2 MiB (25.4%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Silicon Labs HubZ Smart Home Controller type: Hub driver: cp210x interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 10c4:8a2a class-ID: 0000 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 318 lib: 180 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/zerotier.list 1: deb https: //download.zerotier.com/debian/bullseye/ bullseye main Processes: CPU top: 5 of 118 1: cpu: 4.0% command: [kworker/u8:4-events_unbound] pid: 3448 mem: 0.00 MiB (0.0%) 2: cpu: 1.0% command: zerotier-one pid: 2190 mem: 10.9 MiB (0.2%) 3: cpu: 0.5% command: init pid: 1 mem: 9.95 MiB (0.2%) 4: cpu: 0.4% command: smartd pid: 3220 mem: 5.09 MiB (0.1%) 5: cpu: 0.2% command: [kworker/u8:2-events_unbound] pid: 2256 mem: 0.00 MiB (0.0%) Memory top: 5 of 118 1: mem: 14.9 MiB (0.3%) command: systemd-journald pid: 225 cpu: 0.0% 2: mem: 11.1 MiB (0.2%) command: systemd-resolved pid: 393 cpu: 0.0% 3: mem: 10.9 MiB (0.2%) command: zerotier-one pid: 2190 cpu: 1.0% 4: mem: 9.95 MiB (0.2%) command: init pid: 1 cpu: 0.5% 5: mem: 7.74 MiB (0.2%) command: sshd: pid: 2222 cpu: 0.1% Info: Processes: 118 Uptime: 27m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.06

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LANG = "fr_FR.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Kernel: 5.10.0-8-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 
           parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0x319c79e5 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw 
           fsck.repair=yes net.ifnames=0 rootwait 
           Console: tty pts/1 Distro: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.7 GiB used: 278.3 MiB (7.3%) 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Display: server: No display server data found. Headless machine? tty: 158x19 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.0-8-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: wlan0 state: down mac:  
           IF-ID-2: ztuzey7ixp state: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: global 
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 59.63 GiB used: 1003.3 MiB (1.6%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Transcend model: TS64GMSA370 
           family: based SSDs size: 59.63 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 
           speed: 6.0 Gb/s type: SSD rev: P1225CH1 temp: 42 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 10 read: 544 MiB written: 1.19 GiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 59.33 GiB size: 58.43 GiB (98.47%) used: 928.1 MiB (1.6%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: 899ea962-703a-49b8-926a-33b14329c638 
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 75.2 MiB (25.4%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.3:3 info: Silicon Labs HubZ Smart Home Controller type: Hub 
           driver: cp210x interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 10c4:8a2a 
           class-ID: 0000 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge 
           ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 318 lib: 180 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/zerotier.list 
           1: deb https: //download.zerotier.com/debian/bullseye/ bullseye main
Processes: CPU top: 5 of 118 
           1: cpu: 4.0% command: [kworker/u8:4-events_unbound] pid: 3448 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.0% command: zerotier-one pid: 2190 mem: 10.9 MiB (0.2%) 
           3: cpu: 0.5% command: init pid: 1 mem: 9.95 MiB (0.2%) 
           4: cpu: 0.4% command: smartd pid: 3220 mem: 5.09 MiB (0.1%) 
           5: cpu: 0.2% command: [kworker/u8:2-events_unbound] pid: 2256 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 118 
           1: mem: 14.9 MiB (0.3%) command: systemd-journald pid: 225 cpu: 0.0% 
           2: mem: 11.1 MiB (0.2%) command: systemd-resolved pid: 393 cpu: 0.0% 
           3: mem: 10.9 MiB (0.2%) command: zerotier-one pid: 2190 cpu: 1.0% 
           4: mem: 9.95 MiB (0.2%) command: init pid: 1 cpu: 0.5% 
           5: mem: 7.74 MiB (0.2%) command: sshd: pid: 2222 cpu: 0.1% 
Info:      Processes: 118 Uptime: 27m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: 
           gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.06

Benchmark #49981 - Brand: Transcend MSA Series