Benchmark #50204 - pibenchmarks.com

Brand: Team L3 Evo Series
SSD (2.5" SATA)
#184 / 1,539
55
#215 / 1,539
#206 / 875
#19 / 363
8,314
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2021-09-11 16:46:39
#50,204
8,791
+477 (+5.43%)
nimyras

Storage Details
Team L3 Evo Series
SSD (2.5" SATA)
240G
SSD
Team
L3EVOSSD240GB
2.5 inch
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
117 MB/s
321.4 MB/s
250.11 MB/s
22,985 IOPS
30,521 IOPS
91,941 KB/s
122,086 KB/s
33,569 KB/s
23,025 KB/s
20,155 KB/s
27,022 KB/s

inxi Results
System: Kernel: 5.10.0-8-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: video=HDMI-A-1:1920x1200M@60 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x7fddbfbc bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS1,115200 console=tty0 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait Console: tty 1 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.63 GiB used: 367.3 MiB (4.7%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 240x75 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: Cambridge Audio Azur DacMagic 100 type: USB driver: snd-usb-audio bus-ID: 1-1.1:3 chip-ID: 22e8:dac4 class-ID: fe01 Server-1: ALSA v: k5.10.0-8-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 283.05 GiB used: 983.9 MiB (0.3%) ID-1: /dev/mmcblk1 maj-min: 179:0 model: SR64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: TEAM L3 EVO SSD 240GB size: 223.57 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: SSD rev: SAFM12.2 temp: 30 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 97d 23h cycles: 3789 written: 2 MiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 223.28 GiB size: 219.96 GiB (98.51%) used: 910.1 MiB (0.4%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 73.8 MiB (24.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 256 MiB fs: vfat label: boot uuid: 7616-4FD8 ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: Cambridge Audio Azur DacMagic 100 type: Audio driver: snd-usb-audio interfaces: 3 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 22e8:dac4 class-ID: fe01 Device-2: 1-1.3:4 info: Logitech USB Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA chip-ID: 046d:c53f class-ID: 0300 Device-3: 1-1.4:5 info: Microdia USB DEVICE type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 400mA chip-ID: 0c45:8513 class-ID: 0301 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 144mA chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 301 lib: 177 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Processes: CPU top: 5 of 116 1: cpu: 1.6% command: init pid: 1 mem: 9.82 MiB (0.1%) 2: cpu: 0.3% command: smartd pid: 2396 mem: 5.20 MiB (0.0%) 3: cpu: 0.2% command: [kworker/u8:2-flush-8:0] pid: 1317 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: [kworker/2:1h-kblockd] pid: 74 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/0:1h-kblockd] pid: 168 mem: 0.00 MiB (0.0%) Memory top: 5 of 116 1: mem: 14.0 MiB (0.1%) command: systemd-journald pid: 240 cpu: 0.1% 2: mem: 9.82 MiB (0.1%) command: init pid: 1 cpu: 1.6% 3: mem: 7.27 MiB (0.0%) command: systemd pid: 856 cpu: 0.0% 4: mem: 7.16 MiB (0.0%) command: dhclient pid: 442 cpu: 0.0% 5: mem: 6.48 MiB (0.0%) command: systemd-logind pid: 604 cpu: 0.0% Info: Processes: 116 Uptime: 11m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.0-8-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: video=HDMI-A-1:1920x1200M@60 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 
           bcm2709.serial=0x7fddbfbc bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 
           bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS1,115200 console=tty0 
           root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait 
           Console: tty 1 Distro: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.63 GiB used: 367.3 MiB (4.7%) 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Display: server: No display server data found. Headless machine? tty: 240x75 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: Cambridge Audio Azur DacMagic 100 type: USB driver: snd-usb-audio 
           bus-ID: 1-1.1:3 chip-ID: 22e8:dac4 class-ID: fe01 Server-1: ALSA v: k5.10.0-8-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: 
           hardware: no software: no address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 283.05 GiB used: 983.9 MiB (0.3%) 
           ID-1: /dev/mmcblk1 maj-min: 179:0 model: SR64G size: 59.48 GiB block-size: 
           physical: 512 B logical: 512 B type: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: TEAM L3 EVO SSD 240GB 
           size: 223.57 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           type: SSD rev: SAFM12.2 temp: 30 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2y 97d 23h cycles: 3789 written: 2 MiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 223.28 GiB size: 219.96 GiB (98.51%) used: 910.1 MiB (0.4%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT 
           uuid: 899ea962-703a-49b8-926a-33b14329c638 
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 73.8 MiB (24.9%) 
           fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 
Swap:      Alert: No swap data was found. 
Unmounted: ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 256 MiB fs: vfat label: boot uuid: 7616-4FD8 
           ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.1:3 info: Cambridge Audio Azur DacMagic 100 type: Audio 
           driver: snd-usb-audio interfaces: 3 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 22e8:dac4 class-ID: fe01 Device-2: 1-1.3:4 info: Logitech USB Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s power: 98mA 
           chip-ID: 046d:c53f class-ID: 0300 
           Device-3: 1-1.4:5 info: Microdia USB DEVICE type: Keyboard,Mouse 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 400mA 
           chip-ID: 0c45:8513 class-ID: 0301 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge 
           ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 144mA 
           chip-ID: 174c:55aa class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 301 lib: 177 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian bullseye main contrib non-free
           2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
Processes: CPU top: 5 of 116 
           1: cpu: 1.6% command: init pid: 1 mem: 9.82 MiB (0.1%) 
           2: cpu: 0.3% command: smartd pid: 2396 mem: 5.20 MiB (0.0%) 
           3: cpu: 0.2% command: [kworker/u8:2-flush-8:0] pid: 1317 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: [kworker/2:1h-kblockd] pid: 74 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: [kworker/0:1h-kblockd] pid: 168 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 116 
           1: mem: 14.0 MiB (0.1%) command: systemd-journald pid: 240 cpu: 0.1% 
           2: mem: 9.82 MiB (0.1%) command: init pid: 1 cpu: 1.6% 
           3: mem: 7.27 MiB (0.0%) command: systemd pid: 856 cpu: 0.0% 
           4: mem: 7.16 MiB (0.0%) command: dhclient pid: 442 cpu: 0.0% 
           5: mem: 6.48 MiB (0.0%) command: systemd-logind pid: 604 cpu: 0.0% 
Info:      Processes: 116 Uptime: 11m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: 
           gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.06

Benchmark #50204 - Brand: Team L3 Evo Series