Benchmark #5022 - pibenchmarks.com

Brand: SanDisk SDHC (SS08G)
C4
#283 / 1,539
31
#1,364 / 1,539
#286 / 369
686
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-10 17:22:26
#5,022
676
-10 (-1.48%)
allartburns
SanDisk 8GB HC I Micro SD Memory Card on Pi 4B 1.2

Secure Digital (SD) Card Details
SanDisk SDHC (SS08G)
C4
7.2G
SD
SanDisk
SS08G
SDHC
3.00
0x03
SD
8.0
01/2016
Class 4
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
4 GB
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
4.7 MB/s
39.37 MB/s
38.37 MB/s
434 IOPS
2,520 IOPS
1,736 KB/s
10,081 KB/s
7,963 KB/s
2,059 KB/s
6,486 KB/s
1,315 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 218.1 MiB (5.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 80x60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.0.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.0.X.X IP v6: fe80::da49:2a2c:a290:daa9/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 108.39.X.X Drives: Local Storage: total: 7.40 GiB used: 5.77 GiB (78.0%) ID-1: /dev/mmcblk0 model: SS08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.15 GiB size: 6.97 GiB (97.54%) used: 5.72 GiB (82.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.5% command: init pid: 1 mem: 7.82 MiB (0.2%) 2: cpu: 0.3% command: systemd-journald pid: 119 mem: 6.96 MiB (0.1%) 3: cpu: 0.2% command: systemd-udevd pid: 142 mem: 3.66 MiB (0.0%) 4: cpu: 0.1% command: [kworker/0:1h-mmc_complete] pid: 76 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/3:1h-kblockd] pid: 77 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 12.4 MiB (0.3%) command: packagekitd pid: 1005 cpu: 0.1% 2: mem: 8.74 MiB (0.2%) command: udisksd pid: 348 cpu: 0.1% 3: mem: 7.82 MiB (0.2%) command: init pid: 1 cpu: 1.5% 4: mem: 6.96 MiB (0.1%) command: systemd-journald pid: 119 cpu: 0.3% 5: mem: 6.76 MiB (0.1%) command: systemd pid: 543 cpu: 0.0% Info: Processes: 131 Uptime: 3m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.37

inxi Results

System:
  Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
  Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 
  rev: c03112 
Memory:
  RAM: total: 3.89 GiB used: 218.1 MiB (5.5%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A 
  bogomips: 432 
  Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 
  3: 600 4: 600 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting 
  tty: 80x60 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.75-v7l+ 
Network:
  Message: No ARM data found for this feature. 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IP v4: 10.0.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 10.0.X.X 
  IP v6: fe80::da49:2a2c:a290:daa9/64 scope: link 
  IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 108.39.X.X 
Drives:
  Local Storage: total: 7.40 GiB used: 5.77 GiB (78.0%) 
  ID-1: /dev/mmcblk0 model: SS08G size: 7.40 GiB block size: physical: 512 B 
  logical: 512 B scheme: MBR 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 7.15 GiB size: 6.97 GiB (97.54%) used: 5.72 GiB (82.1%) 
  fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
  uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 9F2D-0578 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
  chip ID: 2109:3431 
  Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 
  Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 
  1: cpu: 1.5% command: init pid: 1 mem: 7.82 MiB (0.2%) 
  2: cpu: 0.3% command: systemd-journald pid: 119 mem: 6.96 MiB (0.1%) 
  3: cpu: 0.2% command: systemd-udevd pid: 142 mem: 3.66 MiB (0.0%) 
  4: cpu: 0.1% command: [kworker/0:1h-mmc_complete] pid: 76 
  mem: 0.00 MiB (0.0%) 
  5: cpu: 0.1% command: [kworker/3:1h-kblockd] pid: 77 mem: 0.00 MiB (0.0%) 
  Memory top: 5 
  1: mem: 12.4 MiB (0.3%) command: packagekitd pid: 1005 cpu: 0.1% 
  2: mem: 8.74 MiB (0.2%) command: udisksd pid: 348 cpu: 0.1% 
  3: mem: 7.82 MiB (0.2%) command: init pid: 1 cpu: 1.5% 
  4: mem: 6.96 MiB (0.1%) command: systemd-journald pid: 119 cpu: 0.3% 
  5: mem: 6.76 MiB (0.1%) command: systemd pid: 543 cpu: 0.0% 
Info:
  Processes: 131 Uptime: 3m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) inxi: 3.0.37

Benchmark #5022 - Brand: SanDisk SDHC (SS08G)