Benchmark #50332 - pibenchmarks.com

Brand: Samsung 870 EVO
SSD (2.5" SATA)
#21 / 1,539
429
#364 / 1,539
#350 / 875
#62 / 363
6,997
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-09-15 07:32:04
#50,332
5,529
-1,468 (-26.55%)
Anonymous
Pi4 Samsung SSD

Storage Details
Samsung 870 EVO
SSD (2.5" SATA)
500G
SSD
Samsung
SSD870EVO500GB
2.5 inch
SATA
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
113 MB/s
266.18 MB/s
229.66 MB/s
5,950 IOPS
5,669 IOPS
23,800 KB/s
22,679 KB/s
26,306 KB/s
18,449 KB/s
17,582 KB/s
23,994 KB/s

inxi Results
System: Kernel: 5.10.60-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=19981497-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A Distro: Raspberry Pi OS base: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.7 GiB used: 677.8 MiB (8.6%) gpu: 76 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.60-v8+ running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-3adaf56be9f2 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-fd40e041964d state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-4: tailscale0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global IP v6: scope: global IP v6: virtual: stable-privacy scope: link IF-ID-5: veth08f0e1e state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth375007b state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth37e5d50 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth933c44d state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethbd5a6e8 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethe982384 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 465.76 GiB used: 5.49 GiB (1.2%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: JMicron Tech model: N/A drive vendor: Samsung drive model: SSD 870 EVO 500GB size: 465.76 GiB block-size: physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s type: SSD rev: 0404 drive rev: SVT01B6Q temp: 37 C scheme: MBR SMART: yes state: enabled health: PASSED on: 76d 2h cycles: 92 written: 1.69 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.51 GiB size: 458.18 GiB (98.43%) used: 5.46 GiB (1.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 1d91ff59-94c1-4271-a4d5-fdf142647058 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.6 MiB (11.8%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 71DB-60DA Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:0578 class-ID: 0806 Sensors: System Temperatures: cpu: 42.4 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: apt: 1443 lib: 721 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/tailscale.list 1: deb https: //pkgs.tailscale.com/stable/ubuntu focal main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 201 1: cpu: 0.7% command: tailscaled pid: 674 mem: 18.6 MiB (0.2%) 2: cpu: 0.5% command: smartd pid: 13365 mem: 4.06 MiB (0.0%) 3: cpu: 0.4% command: [kworker/1:2-mm_percpu_wq] pid: 11017 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: [kworker/1:3+events_freezable] pid: 12301 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: [irq/51-mmc0] pid: 89 mem: 0.00 MiB (0.0%) Memory top: 5 of 201 1: mem: 90.4 MiB (1.1%) command: node pid: 2965 cpu: 0.1% 2: mem: 80.8 MiB (1.0%) command: mariadbd pid: 2607 cpu: 0.0% 3: mem: 70.9 MiB (0.9%) command: dockerd pid: 666 cpu: 0.1% 4: mem: 66.9 MiB (0.8%) command: nginx: pid: 2947 cpu: 0.0% 5: mem: 65.3 MiB (0.8%) command: nginx: pid: 12356 cpu: 0.1% Info: Processes: 201 Uptime: 18h 28m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.60-v8+ aarch64 bits: 64 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=19981497-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: N/A Distro: Raspberry Pi OS base: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.7 GiB used: 677.8 MiB (8.6%) gpu: 76 MiB 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 
           class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 
           class-ID: hdmi 
           Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Sound Server-1: ALSA v: k5.10.60-v8+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: no 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: br-3adaf56be9f2 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: br-fd40e041964d state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-4: tailscale0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global 
           IP v6:  scope: global 
           IP v6:  virtual: stable-privacy scope: link 
           IF-ID-5: veth08f0e1e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth375007b state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth37e5d50 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth933c44d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethbd5a6e8 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethe982384 state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6119 hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 465.76 GiB used: 5.49 GiB (1.2%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: JMicron Tech model: N/A 
           drive vendor: Samsung drive model: SSD 870 EVO 500GB size: 465.76 GiB block-size: 
           physical: 512 B logical: 512 B sata: 3.3 speed: 6.0 Gb/s type: SSD rev: 0404 drive rev: SVT01B6Q temp: 37 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 76d 2h cycles: 92 written: 1.69 TiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 465.51 GiB size: 458.18 GiB (98.43%) used: 5.46 GiB (1.2%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 1d91ff59-94c1-4271-a4d5-fdf142647058 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.6 MiB (11.8%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 71DB-60DA 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA 
           chip-ID: 152d:0578 class-ID: 0806 Sensors:   System Temperatures: cpu: 42.4 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: apt: 1443 lib: 721 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/tailscale.list 
           1: deb https: //pkgs.tailscale.com/stable/ubuntu focal main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 201 
           1: cpu: 0.7% command: tailscaled pid: 674 mem: 18.6 MiB (0.2%) 
           2: cpu: 0.5% command: smartd pid: 13365 mem: 4.06 MiB (0.0%) 
           3: cpu: 0.4% command: [kworker/1:2-mm_percpu_wq] pid: 11017 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.4% command: [kworker/1:3+events_freezable] pid: 12301 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: [irq/51-mmc0] pid: 89 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 201 
           1: mem: 90.4 MiB (1.1%) command: node pid: 2965 cpu: 0.1% 
           2: mem: 80.8 MiB (1.0%) command: mariadbd pid: 2607 cpu: 0.0% 
           3: mem: 70.9 MiB (0.9%) command: dockerd pid: 666 cpu: 0.1% 
           4: mem: 66.9 MiB (0.8%) command: nginx: pid: 2947 cpu: 0.0% 
           5: mem: 65.3 MiB (0.8%) command: nginx: pid: 12356 cpu: 0.1% 
Info:      Processes: 201 Uptime: 18h 28m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

Benchmark #50332 - Brand: Samsung 870 EVO