Benchmark #50359 - pibenchmarks.com

Brand: Transcend MTE Series
SSD (M.2 NVMe)
#33 / 1,672
386
#142 / 1,672
#142 / 983
#133 / 280
34,070
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-09-15 23:16:05
#50,359
19,885
-14,185 (-71.34%)
wildestpixel
cm4 transcend 128gb nvme 64 bit

Storage Details
Transcend MTE Series
SSD (M.2 NVMe)
119G
SSD
Transcend
TS128GMTE110S
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 4 1.0
Raspberry Pi Compute Module 4 Rev 1.0
Raspberry Pi Foundation
N/A
4
2,147 (+647)
500
1,600

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
158 MB/s
362.91 MB/s
352.21 MB/s
17,762 IOPS
66,493 IOPS
71,049 KB/s
265,974 KB/s
121,296 KB/s
74,056 KB/s
42,830 KB/s
101,647 KB/s

inxi Results
System: Kernel: 5.10.60-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=70327ba6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspberry Pi OS base: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835 rev: c03140 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 490.4 MiB (12.7%) gpu: 76 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 2200 MHz min/max: 600/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200 4: 2200 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 240x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.60-v8+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 126.52 GiB used: 3.83 GiB (3.0%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: 8GTF4R size: 7.28 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 0x8 SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Transcend model: TS128GMTE110S size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD rev: T1102A0L temp: 41 C scheme: MBR SMART: yes health: PASSED on: 20d 18h cycles: 47 read-units: 243,072 [124 GB] written-units: 471,522 [241 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.99 GiB size: 116.62 GiB (98.01%) used: 3.8 GiB (3.3%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs uuid: 1d91ff59-94c1-4271-a4d5-fdf142647058 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 30.8 MiB (12.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: boot uuid: 71DB-60DA Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1462 lib: 717 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 168 1: cpu: 8.8% command: init pid: 1 mem: 9.45 MiB (0.2%) 2: cpu: 1.7% command: applet.py started by: python3 pid: 641 mem: 35.6 MiB (0.9%) 3: cpu: 1.6% command: lxpanel pid: 617 mem: 34.5 MiB (0.9%) 4: cpu: 1.0% command: systemd-journald pid: 134 mem: 7.46 MiB (0.1%) 5: cpu: 1.0% command: dbus-daemon pid: 421 mem: 4.12 MiB (0.1%) Memory top: 5 of 168 1: mem: 62.9 MiB (1.6%) command: xorg pid: 511 cpu: 1.0% 2: mem: 38.0 MiB (1.0%) command: pcmanfm pid: 619 cpu: 0.9% 3: mem: 35.6 MiB (0.9%) command: applet.py started by: python3 pid: 641 cpu: 1.7% 4: mem: 34.5 MiB (0.9%) command: lxpanel pid: 617 cpu: 1.6% 5: mem: 34.1 MiB (0.8%) command: vncserver-x11-core pid: 477 cpu: 0.9% Info: Processes: 168 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.60-v8+ aarch64 bits: 64 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=70327ba6-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspberry Pi OS 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835 
           rev: c03140 Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.78 GiB used: 490.4 MiB (12.7%) gpu: 76 MiB 
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 
           model-id: 0 stepping: 3 bogomips: 432 
           Speed: 2200 MHz min/max: 600/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200 
           4: 2200 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 240x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.60-v8+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6119 hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 126.52 GiB used: 3.83 GiB (3.0%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: 8GTF4R size: 7.28 GiB block-size: 
           physical: 512 B logical: 512 B type: SSD rev: 0x8 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Transcend model: TS128GMTE110S 
           size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 
           type: SSD rev: T1102A0L temp: 41 C scheme: MBR 
           SMART: yes health: PASSED on: 20d 18h cycles: 47 read-units: 243,072 [124 GB] 
           written-units: 471,522 [241 GB] 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 118.99 GiB size: 116.62 GiB (98.01%) used: 3.8 GiB (3.3%) fs: ext4 
           block-size: 4096 B dev: /dev/nvme0n1p2 maj-min: 259:2 label: rootfs 
           uuid: 1d91ff59-94c1-4271-a4d5-fdf142647058 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 30.8 MiB (12.2%) fs: vfat 
           block-size: 512 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: boot uuid: 71DB-60DA 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 0424:2514 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1462 lib: 717 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian buster main contrib non-free
           2: deb http: //deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http: //deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 168 
           1: cpu: 8.8% command: init pid: 1 mem: 9.45 MiB (0.2%) 
           2: cpu: 1.7% command: applet.py started by: python3 pid: 641 mem: 35.6 MiB (0.9%) 
           3: cpu: 1.6% command: lxpanel pid: 617 mem: 34.5 MiB (0.9%) 
           4: cpu: 1.0% command: systemd-journald pid: 134 mem: 7.46 MiB (0.1%) 
           5: cpu: 1.0% command: dbus-daemon pid: 421 mem: 4.12 MiB (0.1%) 
           Memory top: 5 of 168 
           1: mem: 62.9 MiB (1.6%) command: xorg pid: 511 cpu: 1.0% 
           2: mem: 38.0 MiB (1.0%) command: pcmanfm pid: 619 cpu: 0.9% 
           3: mem: 35.6 MiB (0.9%) command: applet.py started by: python3 pid: 641 cpu: 1.7% 
           4: mem: 34.5 MiB (0.9%) command: lxpanel pid: 617 cpu: 1.6% 
           5: mem: 34.1 MiB (0.8%) command: vncserver-x11-core pid: 477 cpu: 0.9% 
Info:      Processes: 168 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.06

Benchmark #50359 - Brand: Transcend MTE Series