Benchmark #50376 - pibenchmarks.com

Brand: Pioneer APS-SE20Q M.2 NVMe SSD
SSD (M.2 NVMe)
#1,163 / 1,679
2
#261 / 1,679
#259 / 984
#234 / 281
13,311
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.se

Overview
2021-09-16 11:08:35
#50,376
15,410
+2,099 (+13.62%)
andynugent

Storage Details
Pioneer APS-SE20Q M.2 NVMe SSD
SSD (M.2 NVMe)
465.8G
SSD
Pioneer
APS-SE20Q-500
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 4 1.0
Raspberry Pi Compute Module 4 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
171 MB/s
345.9 MB/s
335.82 MB/s
10,529 IOPS
28,926 IOPS
42,118 KB/s
115,706 KB/s
86,563 KB/s
49,890 KB/s
39,580 KB/s
85,019 KB/s

inxi Results
System: Kernel: 5.10.60-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1200M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=254868dc-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quie$ Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2711 rev: c03140 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 483.6 MiB (12.4%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x317mm (20.0x12.5") s-diag: 599mm (23.6") Monitor-1: HDMI-1 res: 1920x1200 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.60-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 494.88 GiB used: 30.09 GiB (6.1%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: BJTD4R size: 29.12 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 0x8 scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Apacer model: APS-SE20Q-500 size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD rev: ECFM52.2 temp: 28 C scheme: MBR SMART: yes health: PASSED cycles: 6 read-units: 1,706 [873 MB] written-units: 35,791 [18.3 GB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.76 GiB size: 457.45 GiB (98.22%) used: 15.31 GiB (3.3%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: NVMe uuid: 7e8d67dc-b212-488e-9c3c-dc44f2441190 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 61.8 MiB (24.5%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: B05C-D0C4 ID-3: /media/pi/rootfs raw-size: 28.87 GiB size: 28.36 GiB (98.24%) used: 14.72 GiB (51.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 075b0d0c-7b1e-4855-9547-125591698723 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2068 lib: 952 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 181 1: cpu: 6.0% command: xorg pid: 573 mem: 74.4 MiB (1.9%) 2: cpu: 5.5% command: init pid: 1 mem: 8.05 MiB (0.2%) 3: cpu: 2.6% command: vncserver-x11-core pid: 559 mem: 34.7 MiB (0.9%) 4: cpu: 2.4% command: gpartedbin pid: 1056 mem: 28.4 MiB (0.7%) 5: cpu: 2.2% command: lxterminal pid: 973 mem: 48.3 MiB (1.2%) Memory top: 5 of 181 1: mem: 74.4 MiB (1.9%) command: xorg pid: 573 cpu: 6.0% 2: mem: 48.3 MiB (1.2%) command: lxterminal pid: 973 cpu: 2.2% 3: mem: 34.7 MiB (0.9%) command: vncserver-x11-core pid: 559 cpu: 2.6% 4: mem: 29.9 MiB (0.7%) command: lxpanel pid: 694 cpu: 1.9% 5: mem: 28.6 MiB (0.7%) command: applet.py started by: python3 pid: 719 cpu: 0.9% Info: Processes: 181 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.60-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1200M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=254868dc-01 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quie$ 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2711 
           rev: c03140 Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.82 GiB used: 483.6 MiB (12.4%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x317mm (20.0x12.5") 
           s-diag: 599mm (23.6") 
           Monitor-1: HDMI-1 res: 1920x1200 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.60-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: down mac:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6119 hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 494.88 GiB used: 30.09 GiB (6.1%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: BJTD4R size: 29.12 GiB 
           block-size: physical: 512 B logical: 512 B type: SSD rev: 0x8 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Apacer model: APS-SE20Q-500 size: 465.76 GiB 
           block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD 
           rev: ECFM52.2 temp: 28 C scheme: MBR 
           SMART: yes health: PASSED cycles: 6 read-units: 1,706 [873 MB] 
           written-units: 35,791 [18.3 GB] 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 465.76 GiB size: 457.45 GiB (98.22%) used: 15.31 GiB (3.3%) fs: ext4 
           block-size: 4096 B dev: /dev/nvme0n1p1 maj-min: 259:1 label: NVMe 
           uuid: 7e8d67dc-b212-488e-9c3c-dc44f2441190 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 61.8 MiB (24.5%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: B05C-D0C4 
           ID-3: /media/pi/rootfs raw-size: 28.87 GiB size: 28.36 GiB (98.24%) 
           used: 14.72 GiB (51.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 
           label: rootfs uuid: 075b0d0c-7b1e-4855-9547-125591698723 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 0424:2514 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2068 lib: 952 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 181 
           1: cpu: 6.0% command: xorg pid: 573 mem: 74.4 MiB (1.9%) 
           2: cpu: 5.5% command: init pid: 1 mem: 8.05 MiB (0.2%) 
           3: cpu: 2.6% command: vncserver-x11-core pid: 559 mem: 34.7 MiB (0.9%) 
           4: cpu: 2.4% command: gpartedbin pid: 1056 mem: 28.4 MiB (0.7%) 
           5: cpu: 2.2% command: lxterminal pid: 973 mem: 48.3 MiB (1.2%) 
           Memory top: 5 of 181 
           1: mem: 74.4 MiB (1.9%) command: xorg pid: 573 cpu: 6.0% 
           2: mem: 48.3 MiB (1.2%) command: lxterminal pid: 973 cpu: 2.2% 
           3: mem: 34.7 MiB (0.9%) command: vncserver-x11-core pid: 559 cpu: 2.6% 
           4: mem: 29.9 MiB (0.7%) command: lxpanel pid: 694 cpu: 1.9% 
           5: mem: 28.6 MiB (0.7%) command: applet.py started by: python3 pid: 719 cpu: 0.9% 
Info:      Processes: 181 Uptime: 1m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.06

Benchmark #50376 - Brand: Pioneer APS-SE20Q M.2 NVMe SSD