Benchmark #50560 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,539
1,343
#569 / 1,539
#548 / 875
#171 / 363
5,919
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-09-22 15:34:06
#50,560
5,556
-363 (-6.53%)
Anonymous
p400--ssd

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
480G
SSD
SanDisk
SSDPLUS480GB
2.5 inch
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 400 1.0
Raspberry Pi 400 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,800
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
196 MB/s
290.73 MB/s
213.15 MB/s
8,759 IOPS
1,521 IOPS
35,038 KB/s
6,087 KB/s
14,316 KB/s
14,494 KB/s
13,956 KB/s
17,663 KB/s

inxi Results
System: Kernel: 5.10.60-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=3e37d356-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 758.5 MiB (19.4%) gpu: 256 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-4: Microdia type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-1.1:3 chip-ID: 0c45:636b class-ID: 0102 Display: server: X.org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev tty: 240x67 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-4: Microdia type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-1.1:3 chip-ID: 0c45:636b class-ID: 0102 Server-1: ALSA v: k5.10.60-v7l+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6606 hci-v: 5.0 rev: 36 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 447.13 GiB used: 42.7 GiB (9.5%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SSD PLUS 480GB size: 447.13 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s type: SSD rev: UG4304RL temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 5d 2h cycles: 17 read: 3 KiB written: 21 KiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 446.88 GiB size: 438.86 GiB (98.21%) used: 42.65 GiB (9.7%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 05c2c54d-f13e-4442-bf69-70e99c3d748d ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 997C-A34A Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: Microdia type: Video,Audio driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0c45:636b class-ID: 0102 Device-2: 1-1.3:4 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 Device-3: 1-1.4:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2213 lib: 1206 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_14.x buster main 2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_14.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 182 1: cpu: 1.3% command: [kworker/u8:3-events_unbound] pid: 5208 mem: 0.00 MiB (0.0%) 2: cpu: 1.1% command: lxpanel pid: 1129 mem: 40.9 MiB (1.1%) 3: cpu: 0.6% command: smartd pid: 5742 mem: 3.17 MiB (0.0%) 4: cpu: 0.4% command: [irq/49-mmc0] pid: 87 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: python3 pid: 1080 mem: 112.6 MiB (3.0%) Memory top: 5 of 182 1: mem: 112.6 MiB (3.0%) command: python3 pid: 1080 cpu: 0.3% 2: mem: 64.3 MiB (1.7%) command: xorg pid: 591 cpu: 0.2% 3: mem: 50.8 MiB (1.3%) command: dockerd pid: 627 cpu: 0.0% 4: mem: 40.9 MiB (1.1%) command: lxpanel pid: 1129 cpu: 1.1% 5: mem: 33.7 MiB (0.9%) command: containerd pid: 563 cpu: 0.1% Info: Processes: 182 Uptime: 1d 1h 37m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi3+deb10u2 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.60-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=3e37d356-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.82 GiB used: 758.5 MiB (19.4%) gpu: 256 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-4: Microdia type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-1.1:3 
           chip-ID: 0c45:636b class-ID: 0102 Display: server: X.org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev tty: 240x67 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-4: Microdia type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-1.1:3 
           chip-ID: 0c45:636b class-ID: 0102 Server-1: ALSA v: k5.10.60-v7l+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: down mac:  
           IF-ID-1: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6606 hci-v: 5.0 rev: 36 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: capturing, telephony 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 447.13 GiB used: 42.7 GiB (9.5%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SSD PLUS 480GB 
           size: 447.13 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           type: SSD rev: UG4304RL temp: 32 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 5d 2h cycles: 17 read: 3 KiB 
           written: 21 KiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 446.88 GiB size: 438.86 GiB (98.21%) used: 42.65 GiB (9.7%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 05c2c54d-f13e-4442-bf69-70e99c3d748d 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 997C-A34A 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.1:3 info: Microdia type: Video,Audio driver: snd-usb-audio,uvcvideo 
           interfaces: 4 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0c45:636b class-ID: 0102 
           Device-2: 1-1.3:4 info: Pixart Imaging Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s power: 100mA 
           chip-ID: 093a:2510 class-ID: 0301 
           Device-3: 1-1.4:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2213 lib: 1206 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_14.x buster main
           2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_14.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 182 
           1: cpu: 1.3% command: [kworker/u8:3-events_unbound] pid: 5208 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.1% command: lxpanel pid: 1129 mem: 40.9 MiB (1.1%) 
           3: cpu: 0.6% command: smartd pid: 5742 mem: 3.17 MiB (0.0%) 
           4: cpu: 0.4% command: [irq/49-mmc0] pid: 87 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: python3 pid: 1080 mem: 112.6 MiB (3.0%) 
           Memory top: 5 of 182 
           1: mem: 112.6 MiB (3.0%) command: python3 pid: 1080 cpu: 0.3% 
           2: mem: 64.3 MiB (1.7%) command: xorg pid: 591 cpu: 0.2% 
           3: mem: 50.8 MiB (1.3%) command: dockerd pid: 627 cpu: 0.0% 
           4: mem: 40.9 MiB (1.1%) command: lxpanel pid: 1129 cpu: 1.1% 
           5: mem: 33.7 MiB (0.9%) command: containerd pid: 563 cpu: 0.1% 
Info:      Processes: 182 Uptime: 1d 1h 37m Init: systemd v: 241 runlevel: 5 
           target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
           clang: 7.0.1-8+rpi3+deb10u2 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

Benchmark #50560 - Brand: SanDisk SSD Plus