Benchmark #50764 - pibenchmarks.com

Brand: SanDisk Cruzer Blade
USB Flash
#357 / 1,679
34
#1,500 / 1,679
#69 / 94
#64 / 89
718
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-09-28 14:01:36
#50,764
587
-131 (-22.32%)
kiwimonk
Sandisk 32Gb USB on Pi2

Storage Details
SanDisk Cruzer Blade
USB Flash
28.4G
USB Flash
SanDisk
CruzerBlade
2.00
480
0781:5567
0x0781 (SanDisk Corp.)
0x5567
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
900
250
450 (+50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
4 MB/s
21.94 MB/s
16.05 MB/s
386 IOPS
986 IOPS
1,546 KB/s
3,945 KB/s
8,626 KB/s
2,195 KB/s
4,057 KB/s
1,984 KB/s

inxi Results
System: Kernel: 5.10.52-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=da3e9818-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 988.8 MiB used: 294.6 MiB (29.8%) gpu: 16 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 5 bogomips: 230 Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: N/A Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Network: Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-32f7efb7b795 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-a4acb9c6376f state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: br-b7e8fa14680a state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: br-be30c2beba49 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-5: br-c0391bfc88a1 state: down mac: IP v4: scope: global broadcast: IF-ID-6: br-c2925509024e state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-7: br-eaf830fdc523 state: down mac: IP v4: scope: global broadcast: IF-ID-8: br-ee02acb9864e state: down mac: IP v4: scope: global broadcast: IF-ID-9: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-10: veth3990313 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth51057e2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: veth6892295 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: veth94a3f2c state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vetheda9f7d state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 31.09 GiB used: 4.4 GiB (14.2%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Toshiba model: SA02G size: 1.84 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Cruzer Blade size: 29.25 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.39 GiB size: 27.92 GiB (98.35%) used: 4.31 GiB (15.4%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 2887d26c-6ae7-449d-9701-c5a4018755b0 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 96 MiB (38.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 4AD7-B4D5 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 33.8 MiB (33.8%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 256 MiB fs: vfat label: boot uuid: 4AD7-B4D5 USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Device-2: 1-1.4:4 info: SanDisk Cruzer Blade type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA chip-ID: 0781:5567 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 633 lib: 298 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 151 1: cpu: 25.8% command: adguardhome pid: 20950 mem: 29.9 MiB (3.0%) 2: cpu: 1.9% command: telegraf pid: 2218 mem: 74.3 MiB (7.6%) 3: cpu: 0.8% command: dockerd pid: 526 mem: 59.7 MiB (6.1%) 4: cpu: 0.6% command: [kworker/1:3-mm_percpu_wq] pid: 1639 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: containerd pid: 409 mem: 17.6 MiB (1.8%) Memory top: 5 of 151 1: mem: 74.3 MiB (7.6%) command: telegraf pid: 2218 cpu: 1.9% 2: mem: 59.7 MiB (6.1%) command: dockerd pid: 526 cpu: 0.8% 3: mem: 29.9 MiB (3.0%) command: adguardhome pid: 20950 cpu: 25.8% 4: mem: 29.6 MiB (3.0%) command: coredns pid: 863 cpu: 0.1% 5: mem: 17.6 MiB (1.8%) command: containerd pid: 409 cpu: 0.5% Info: Processes: 151 Uptime: 16d 11h 15m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.52-v7+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 
           console=ttyAMA0,115200 console=tty1 root=PARTUUID=da3e9818-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a01041 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 988.8 MiB used: 294.6 MiB (29.8%) gpu: 16 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 5 bogomips: 230 
           Speed: 900 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 900 2: 900 3: 900 4: 900 
           Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 
           vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc 
           class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: N/A 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
Network:   Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc 
           class-ID: mmcnr 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: br-32f7efb7b795 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: br-a4acb9c6376f state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: br-b7e8fa14680a state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: br-be30c2beba49 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-5: br-c0391bfc88a1 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-6: br-c2925509024e state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-7: br-eaf830fdc523 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-8: br-ee02acb9864e state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-9: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-10: veth3990313 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: veth51057e2 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: veth6892295 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-13: veth94a3f2c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-14: vetheda9f7d state: up speed: 10000 Mbps duplex: full mac:  
           WAN IP:  
Bluetooth: Message: No bluetooth data found. 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 31.09 GiB used: 4.4 GiB (14.2%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Toshiba model: SA02G size: 1.84 GiB 
           block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Cruzer Blade 
           size: 29.25 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 28.39 GiB size: 27.92 GiB (98.35%) used: 4.31 GiB (15.4%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 2887d26c-6ae7-449d-9701-c5a4018755b0 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 96 MiB (38.1%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 4AD7-B4D5 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 33.8 MiB (33.8%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 256 MiB fs: vfat label: boot uuid: 4AD7-B4D5 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           power: 2mA chip-ID: 0424:9514 class-ID: 0900 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 0424:ec00 class-ID: ff00 
           Device-2: 1-1.4:4 info: SanDisk Cruzer Blade type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA chip-ID: 0781:5567 class-ID: 0806 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 633 lib: 298 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 151 
           1: cpu: 25.8% command: adguardhome pid: 20950 mem: 29.9 MiB (3.0%) 
           2: cpu: 1.9% command: telegraf pid: 2218 mem: 74.3 MiB (7.6%) 
           3: cpu: 0.8% command: dockerd pid: 526 mem: 59.7 MiB (6.1%) 
           4: cpu: 0.6% command: [kworker/1:3-mm_percpu_wq] pid: 1639 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.5% command: containerd pid: 409 mem: 17.6 MiB (1.8%) 
           Memory top: 5 of 151 
           1: mem: 74.3 MiB (7.6%) command: telegraf pid: 2218 cpu: 1.9% 
           2: mem: 59.7 MiB (6.1%) command: dockerd pid: 526 cpu: 0.8% 
           3: mem: 29.9 MiB (3.0%) command: adguardhome pid: 20950 cpu: 25.8% 
           4: mem: 29.6 MiB (3.0%) command: coredns pid: 863 cpu: 0.1% 
           5: mem: 17.6 MiB (1.8%) command: containerd pid: 409 cpu: 0.5% 
Info:      Processes: 151 Uptime: 16d 11h 15m Init: systemd v: 241 runlevel: 5 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

Benchmark #50764 - Brand: SanDisk Cruzer Blade