Benchmark #50823 - pibenchmarks.com

Brand: Samsung PM853T Data Center Series
SSD (2.5" SATA)
#1,347 / 1,680
1
#1,040 / 1,680
#932 / 984
#334 / 370
2,576
	Amazon.com Amazon.ca Amazon.de

Overview
2021-09-30 02:25:07
#50,823
2,576
0 (0.00%)
Anonymous

Storage Details
Samsung PM853T Data Center Series
SSD (2.5" SATA)
240G
SSD
Samsung
MZ7GE240HMGR-00005
SATA
2.10
480
0424:55aa
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
ARMv7 v7l
4
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
34.7 MB/s
28.92 MB/s
31.29 MB/s
2,949 IOPS
2,290 IOPS
11,797 KB/s
9,161 KB/s
12,421 KB/s
9,938 KB/s
8,907 KB/s
12,622 KB/s

inxi Results
System: Host: raspberrypi Kernel: 5.10.60-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=01e8ae4a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles usbhid.mousepoll=0 cgroup_memory=1 cgroup_enable=memory Console: tty pts/1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 999.2 MiB used: 628.7 MiB (62.9%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 237x63 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.60-v7+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fda4:7174:7523:c900:20da:6680:7dac:4a13/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::ce97:519:b975:b709/64 scope: link Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:4 chip-ID: 0424:7800 class-ID: ff00 IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X WAN IP: 211.27.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: XX:XX:XX:XX:XX:XX Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 283.05 GiB used: 20.15 GiB (7.1%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: MZ7GE240HMGR-00005 size: 223.57 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: SSD rev: EXT1303Q temp: 41 C scheme: GPT SMART: yes state: enabled health: PASSED on: 4y 321d 18h cycles: 243 written: 2.28 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.22 GiB size: 58.23 GiB (98.33%) used: 20.05 GiB (34.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.9 MiB (19.4%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: A764-6923 ID-3: /mnt raw-size: 223.57 GiB size: 219.06 GiB (97.98%) used: 60.1 MiB (0.0%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: e3e8d765-58b9-4aa7-8055-c9a52f8c128d Swap: Kernel: swappiness: 100 (default 60) cache-pressure: 500 (default 100) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap ID-2: swap-2 type: zram size: 1.35 GiB used: 699.3 MiB (50.5%) priority: 5 dev: /dev/zram0 Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 Device-2: 1-1.3:5 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2113 lib: 969 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/raspotify.list 1: deb https://dtcooper.github.io/raspotify raspotify main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 195 1: cpu: 37.4% command: webcord pid: 4009 mem: 89.4 MiB (9.6%) 2: cpu: 18.9% command: webcord pid: 4039 mem: 18.7 MiB (2.0%) 3: cpu: 4.6% command: gpartedbin pid: 6754 mem: 19.0 MiB (2.0%) 4: cpu: 2.1% command: [kworker/0:0h-mmc_complete] pid: 6437 mem: 0.00 MiB (0.0%) 5: cpu: 1.5% command: python3 pid: 1493 mem: 25.9 MiB (2.8%) Memory top: 5 of 195 1: mem: 89.4 MiB (9.6%) command: webcord pid: 4009 cpu: 37.4% 2: mem: 36.5 MiB (3.9%) command: xorg pid: 507 cpu: 0.5% 3: mem: 34.3 MiB (3.7%) command: webcord pid: 6841 cpu: 0.6% 4: mem: 25.9 MiB (2.8%) command: python3 pid: 1493 cpu: 1.5% 5: mem: 22.7 MiB (2.4%) command: webcord pid: 3967 cpu: 0.2% Info: Processes: 195 Uptime: 2d 9h 44m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: tty pts/1 (SSH) inxi: 3.3.06

inxi Results

System:    Host: raspberrypi Kernel: 5.10.60-v7+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=01e8ae4a-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles usbhid.mousepoll=0 
           cgroup_memory=1 cgroup_enable=memory 
           Console: tty pts/1 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 
Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 999.2 MiB used: 628.7 MiB (62.9%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 
           bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 237x63 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.60-v7+ running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr 
           IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fda4:7174:7523:c900:20da:6680:7dac:4a13/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::ce97:519:b975:b709/64 scope: link 
           Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:4 chip-ID: 0424:7800 class-ID: ff00 
           IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
           WAN IP: 211.27.X.X 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes 
           address: XX:XX:XX:XX:XX:XX 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 283.05 GiB used: 20.15 GiB (7.1%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL64G size: 59.48 GiB block-size: physical: 512 B 
           logical: 512 B type: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: MZ7GE240HMGR-00005 size: 223.57 GiB block-size: 
           physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: SSD rev: EXT1303Q temp: 41 C 
           scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 4y 321d 18h cycles: 243 written: 2.28 TiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 59.22 GiB size: 58.23 GiB (98.33%) used: 20.05 GiB (34.4%) fs: ext4 block-size: 4096 B 
           dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 2f4adfbf-32e5-44ec-9323-1d08cbe8c29e 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.9 MiB (19.4%) fs: vfat block-size: 512 B 
           dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: A764-6923 
           ID-3: /mnt raw-size: 223.57 GiB size: 219.06 GiB (97.98%) used: 60.1 MiB (0.0%) fs: ext4 block-size: 4096 B 
           dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: e3e8d765-58b9-4aa7-8055-c9a52f8c128d 
Swap:      Kernel: swappiness: 100 (default 60) cache-pressure: 500 (default 100) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
           ID-2: swap-2 type: zram size: 1.35 GiB used: 699.3 MiB (50.5%) priority: 5 dev: /dev/zram0 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 0424:2514 class-ID: 0900 
           Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 2mA 
           chip-ID: 0424:2514 class-ID: 0900 
           Device-1: 1-1.1.1:4 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 
           speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 
           Device-2: 1-1.3:5 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s 
           bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip-ID: 174c:55aa class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2113 lib: 969 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspotify.list 
           1: deb https://dtcooper.github.io/raspotify raspotify main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 195 
           1: cpu: 37.4% command: webcord pid: 4009 mem: 89.4 MiB (9.6%) 
           2: cpu: 18.9% command: webcord pid: 4039 mem: 18.7 MiB (2.0%) 
           3: cpu: 4.6% command: gpartedbin pid: 6754 mem: 19.0 MiB (2.0%) 
           4: cpu: 2.1% command: [kworker/0:0h-mmc_complete] pid: 6437 mem: 0.00 MiB (0.0%) 
           5: cpu: 1.5% command: python3 pid: 1493 mem: 25.9 MiB (2.8%) 
           Memory top: 5 of 195 
           1: mem: 89.4 MiB (9.6%) command: webcord pid: 4009 cpu: 37.4% 
           2: mem: 36.5 MiB (3.9%) command: xorg pid: 507 cpu: 0.5% 
           3: mem: 34.3 MiB (3.7%) command: webcord pid: 6841 cpu: 0.6% 
           4: mem: 25.9 MiB (2.8%) command: python3 pid: 1493 cpu: 1.5% 
           5: mem: 22.7 MiB (2.4%) command: webcord pid: 3967 cpu: 0.2% 
Info:      Processes: 195 Uptime: 2d 9h 44m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: tty pts/1 (SSH) 
           inxi: 3.3.06

Benchmark #50823 - Brand: Samsung PM853T Data Center Series