Benchmark #50922 - pibenchmarks.com

Brand: PNY SD High Performance (SD64G)
C10 U1
#313 / 1,665
36
#1,350 / 1,665
#227 / 389
1,084
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-10-03 03:50:44
#50,922
1,107
+23 (+2.08%)
Anonymous

Secure Digital (SD) Card Details
PNY SD High Performance (SD64G)
C10 U1
59.7G
SD
PNY
SD64G
SDXC
3.00
0x27
PH
3.0
10/2019
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,800 (+300)
500
4 GB
1,600
50

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
25.2 MB/s
41.92 MB/s
42.54 MB/s
417 IOPS
2,250 IOPS
1,670 KB/s
9,002 KB/s
10,336 KB/s
2,848 KB/s
8,390 KB/s
2,519 KB/s

inxi Results
System: Host: raspberrypi Kernel: 5.10.17-v8+ aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=7a95c019-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty pts/1 DM: LightDM 1.26.0 Distro: Raspberry Pi OS base: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 482.9 MiB (12.5%) gpu: 124 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev tty: 84x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.17-v8+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: 240d:1e:2f9:4e00:cb52:8816:6381:dbf1/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::6c74:eae4:c2da:d670/64 scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 133.114.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 88.33 GiB used: 2.83 GiB (3.2%) ID-1: /dev/mmcblk0 maj-min: 179:32 vendor: SanDisk model: SD64G size: 59.68 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Ultra Fit size: 28.65 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.4 GiB size: 27.89 GiB (98.22%) used: 2.8 GiB (10.0%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 92abde04-8c54-4279-a544-8b7f61131e2e ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.3 MiB (11.6%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 8697-34C2 ID-3: /media/pi/0123-4567 raw-size: 59.66 GiB size: 59.64 GiB (99.97%) used: 1.8 MiB (0.0%) fs: exfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:33 label: N/A uuid: 0123-4567 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0781:5583 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1409 lib: 709 Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian buster main contrib non-free 2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http://deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 178 1: cpu: 0.9% command: [kworker/0:1h-kblockd] pid: 62 mem: 0.00 MiB (0.0%) 2: cpu: 0.5% command: [kworker/2:1h-kblockd] pid: 92 mem: 0.00 MiB (0.0%) 3: cpu: 0.5% command: packagekitd pid: 14124 mem: 14.4 MiB (0.3%) 4: cpu: 0.3% command: [kworker/1:0h-kblockd] pid: 7501 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: [kworker/3:1h-kblockd] pid: 89 mem: 0.00 MiB (0.0%) Memory top: 5 of 178 1: mem: 75.8 MiB (2.0%) command: zenity pid: 679 cpu: 0.0% 2: mem: 65.4 MiB (1.7%) command: xorg pid: 560 cpu: 0.0% 3: mem: 38.4 MiB (1.0%) command: pcmanfm pid: 659 cpu: 0.0% 4: mem: 36.4 MiB (0.9%) command: lxpanel pid: 658 cpu: 0.0% 5: mem: 35.8 MiB (0.9%) command: applet.py started by: python3 pid: 681 cpu: 0.0% Info: Processes: 178 Uptime: 1h 54m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: tty pts/1 (SSH) inxi: 3.3.06

inxi Results

System:
  Host: raspberrypi Kernel: 5.10.17-v8+ aarch64 bits: 64 compiler: N/A 
  parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
  snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
  vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 
  console=tty1 root=PARTUUID=7a95c019-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
  Console: tty pts/1 DM: LightDM 1.26.0 Distro: Raspberry Pi OS 
  base: Debian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 
  rev: c03112 
Battery:
  Message: No system battery data found. Is one present? 
Memory:
  RAM: total: 3.78 GiB used: 482.9 MiB (12.5%) gpu: 124 MiB 
  RAM Report: no-data: dmidecode is not allowed to read /dev/mem 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
  family: 8 model-id: 0 stepping: 3 bogomips: 432 
  Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 
  3: 1800 4: 1800 
  Features: asimd cpuid crc32 evtstrm fp 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass status: Vulnerable 
  Type: spectre_v1 mitigation: __user pointer sanitization 
  Type: spectre_v2 status: Vulnerable 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A 
  chip-ID: brcm:fef00700 class-ID: hdmi 
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A 
  chip-ID: brcm:fef05700 class-ID: hdmi 
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
  class-ID: gpu 
  Display: server: X.org 1.20.4 driver: loaded: modesetting unloaded: fbdev 
  tty: 84x24 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 
  class-ID: hdmi 
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 
  class-ID: hdmi 
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A 
  chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio 
  Sound Server-1: ALSA v: k5.10.17-v8+ running: yes 
  Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
  chip-ID: brcm:fe300000 class-ID: mmcnr 
  IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: 240d:1e:2f9:4e00:cb52:8816:6381:dbf1/64 
  type: dynamic mngtmpaddr noprefixroute scope: global 
  IP v6: fe80::6c74:eae4:c2da:d670/64 scope: link 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
  chip-ID: brcm:fd580000 class-ID: ethernet 
  IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
  WAN IP: 133.114.X.X 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 
  class-ID: serial 
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX 
  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff 
  link-mode: slave accept service-classes: rendering, capturing 
Logical:
  Message: No logical block device data found. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 88.33 GiB used: 2.83 GiB (3.2%) 
  ID-1: /dev/mmcblk0 maj-min: 179:32 vendor: SanDisk model: SD64G 
  size: 59.68 GiB block-size: physical: 512 B logical: 512 B type: SSD 
  scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to generate data. 
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Ultra Fit 
  size: 28.65 GiB block-size: physical: 512 B logical: 512 B type: N/A   rev: 1.00 scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No optical or floppy data found. 
Partition:
  ID-1: / raw-size: 28.4 GiB size: 27.89 GiB (98.22%) used: 2.8 GiB (10.0%) 
  fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
  uuid: 92abde04-8c54-4279-a544-8b7f61131e2e 
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 29.3 MiB (11.6%) 
  fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot 
  uuid: 8697-34C2 
  ID-3: /media/pi/0123-4567 raw-size: 59.66 GiB size: 59.64 GiB (99.97%) 
  used: 1.8 MiB (0.0%) fs: exfat block-size: 512 B dev: /dev/mmcblk0p1 
  maj-min: 179:33 label: N/A uuid: 0123-4567 
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 
  file: /var/swap 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
  chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
  chip-ID: 2109:3431 class-ID: 0900 
  Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Device-1: 2-2:2 info: SanDisk Ultra Fit type: Mass Storage driver: usb-storage 
  interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0781:5583 
  class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Packages: apt: 1409 lib: 709 
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://deb.debian.org/debian buster main contrib non-free
  2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
  3: deb http://deb.debian.org/debian buster-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 of 178 
  1: cpu: 0.9% command: [kworker/0:1h-kblockd] pid: 62 mem: 0.00 MiB (0.0%) 
  2: cpu: 0.5% command: [kworker/2:1h-kblockd] pid: 92 mem: 0.00 MiB (0.0%) 
  3: cpu: 0.5% command: packagekitd pid: 14124 mem: 14.4 MiB (0.3%) 
  4: cpu: 0.3% command: [kworker/1:0h-kblockd] pid: 7501 mem: 0.00 MiB (0.0%) 
  5: cpu: 0.2% command: [kworker/3:1h-kblockd] pid: 89 mem: 0.00 MiB (0.0%) 
  Memory top: 5 of 178 
  1: mem: 75.8 MiB (2.0%) command: zenity pid: 679 cpu: 0.0% 
  2: mem: 65.4 MiB (1.7%) command: xorg pid: 560 cpu: 0.0% 
  3: mem: 38.4 MiB (1.0%) command: pcmanfm pid: 659 cpu: 0.0% 
  4: mem: 36.4 MiB (0.9%) command: lxpanel pid: 658 cpu: 0.0% 
  5: mem: 35.8 MiB (0.9%) command: applet.py started by: python3 pid: 681 
  cpu: 0.0% 
Info:
  Processes: 178 Uptime: 1h 54m Init: systemd v: 241 runlevel: 5 
  target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: tty pts/1 (SSH) 
  inxi: 3.3.06

Benchmark #50922 - Brand: PNY SD High Performance (SD64G)