Benchmark #50998 - pibenchmarks.com

Brand: GUGDA M.2 SATA SSD
SSD (M.2 SATA)
#813 / 1,679
6
#256 / 1,679
#254 / 984
#7 / 115
14,208
	AliExpress

Overview
2021-10-05 15:43:33
#50,998
7,614
-6,594 (-86.60%)
MegaTron
GUDGA 512 SSD on Pi4 using Argon One M2

Storage Details
GUGDA M.2 SATA SSD
SSD (M.2 SATA)
512G
SSD
GUGDA
GN512
M.2
SATA
3.00
5,000
174c:1156
0x174c (ASMedia Technology Inc.)
0x1156
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
179 MB/s
278.03 MB/s
253.35 MB/s
9,729 IOPS
18,635 IOPS
38,916 KB/s
74,540 KB/s
30,835 KB/s
26,205 KB/s
16,820 KB/s
28,204 KB/s

inxi Results
System: Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=9439b5f7-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.79 GiB used: 555.8 MiB (7.0%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 30 size: 1600x900mm (63.0x35.4") diag: 1836mm (72.3") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 535.18 GiB used: 3.58 GiB (0.7%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SDU1 size: 58.24 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB model: GN512 size: 476.94 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 476.69 GiB size: 469.23 GiB (98.44%) used: 3.48 GiB (0.7%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7616-4FD8 ID-3: /media/pi/SD64GB raw-size: 58.24 GiB size: 57.08 GiB (98.00%) used: 53.9 MiB (0.1%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: SD64GB uuid: 070235ef-25a6-4d69-856c-658e451246a5 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: digital-X type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 0513:0318 class-ID: 0301 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:1156 class-ID: 0806 Sensors: System Temperatures: cpu: 37.5 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: apt: 1446 lib: 709 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 162 1: cpu: 2.4% command: xorg pid: 601 mem: 64.5 MiB (0.8%) 2: cpu: 1.8% command: init pid: 1 mem: 8.39 MiB (0.1%) 3: cpu: 1.2% command: lxpanel pid: 1483 mem: 30.7 MiB (0.3%) 4: cpu: 0.9% command: preload pid: 533 mem: 3.61 MiB (0.0%) 5: cpu: 0.8% command: glances started by: python3 pid: 539 mem: 35.7 MiB (0.4%) Memory top: 5 of 162 1: mem: 64.5 MiB (0.8%) command: xorg pid: 601 cpu: 2.4% 2: mem: 49.9 MiB (0.6%) command: lxterminal pid: 6619 cpu: 0.7% 3: mem: 35.7 MiB (0.4%) command: glances started by: python3 pid: 539 cpu: 0.8% 4: mem: 30.7 MiB (0.3%) command: lxpanel pid: 1483 cpu: 1.2% 5: mem: 27.6 MiB (0.3%) command: applet.py started by: python3 pid: 1505 cpu: 0.1% Info: Processes: 162 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=9439b5f7-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 7.79 GiB used: 555.8 MiB (7.0%) gpu: 76 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 30 size: 1600x900mm (63.0x35.4") 
           diag: 1836mm (72.3") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: 
           hardware: no software: yes address:  
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 535.18 GiB used: 3.58 GiB (0.7%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 model: SDU1 size: 58.24 GiB block-size: 
           physical: 512 B logical: 512 B type: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB model: GN512 size: 476.94 GiB block-size: 
           physical: 512 B logical: 512 B type: SSD scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 476.69 GiB size: 469.23 GiB (98.44%) used: 3.48 GiB (0.7%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7616-4FD8 
           ID-3: /media/pi/SD64GB raw-size: 58.24 GiB size: 57.08 GiB (98.00%) 
           used: 53.9 MiB (0.1%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p1 maj-min: 179:1 
           label: SD64GB uuid: 070235ef-25a6-4d69-856c-658e451246a5 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.4:3 info: digital-X type: Keyboard,Mouse driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 0513:0318 class-ID: 0301 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip-ID: 174c:1156 class-ID: 0806 Sensors:   System Temperatures: cpu: 37.5 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: apt: 1446 lib: 709 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 162 
           1: cpu: 2.4% command: xorg pid: 601 mem: 64.5 MiB (0.8%) 
           2: cpu: 1.8% command: init pid: 1 mem: 8.39 MiB (0.1%) 
           3: cpu: 1.2% command: lxpanel pid: 1483 mem: 30.7 MiB (0.3%) 
           4: cpu: 0.9% command: preload pid: 533 mem: 3.61 MiB (0.0%) 
           5: cpu: 0.8% command: glances started by: python3 pid: 539 mem: 35.7 MiB (0.4%) 
           Memory top: 5 of 162 
           1: mem: 64.5 MiB (0.8%) command: xorg pid: 601 cpu: 2.4% 
           2: mem: 49.9 MiB (0.6%) command: lxterminal pid: 6619 cpu: 0.7% 
           3: mem: 35.7 MiB (0.4%) command: glances started by: python3 pid: 539 cpu: 0.8% 
           4: mem: 30.7 MiB (0.3%) command: lxpanel pid: 1483 cpu: 1.2% 
           5: mem: 27.6 MiB (0.3%) command: applet.py started by: python3 pid: 1505 cpu: 0.1% 
Info:      Processes: 162 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.06

Benchmark #50998 - Brand: GUGDA M.2 SATA SSD