Benchmark #51027 - pibenchmarks.com

Brand: KingDian RGB 2.5" SSD
SSD (2.5" SATA)
#1,341 / 1,679
1
#482 / 1,679
#465 / 984
#71 / 370
7,150
	AliExpress

Overview
2021-10-06 16:19:48
#51,027
7,150
0 (0.00%)
Anonymous
king dian ssd 128G

Storage Details
KingDian RGB 2.5" SSD
SSD (2.5" SATA)
120G
SSD
KingDian
RGB120GBPSSD
SATA
3.00
5,000
2109:0715
0x2109
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,750 (+250)
600 (+100)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
193 MB/s
324.9 MB/s
278.25 MB/s
2,637 IOPS
20,770 IOPS
10,551 KB/s
83,083 KB/s
31,949 KB/s
25,535 KB/s
18,289 KB/s
27,737 KB/s

inxi Results
System: Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=45d60680-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: c03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 689 MiB (17.6%) gpu: 256 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: IF-ID-1: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 5.11 GiB (4.6%) ID-1: /dev/sda maj-min: 8:0 type: USB model: RGB 120G B PSSD size: 111.79 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: S123 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.54 GiB size: 109.28 GiB (97.98%) used: 5.06 GiB (4.6%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7616-4FD8 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 2109:0715 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1661 lib: 888 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/dicaffeine.list 1: deb https: //dicaffeine.com/repository/ buster main non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 183 1: cpu: 1.9% command: stats.py started by: python3 pid: 364 mem: 11.0 MiB (0.2%) 2: cpu: 1.4% command: init pid: 1 mem: 8.25 MiB (0.2%) 3: cpu: 1.4% command: xorg pid: 598 mem: 56.4 MiB (1.5%) 4: cpu: 1.3% command: [kworker/u8:2-events_unbound] pid: 6029 mem: 0.00 MiB (0.0%) 5: cpu: 1.1% command: lxpanel pid: 775 mem: 31.4 MiB (0.8%) Memory top: 5 of 183 1: mem: 56.4 MiB (1.5%) command: xorg pid: 598 cpu: 1.4% 2: mem: 47.5 MiB (1.2%) command: ibus-ui-gtk3 pid: 757 cpu: 0.2% 3: mem: 41.3 MiB (1.1%) command: ibus-extension-gtk3 pid: 758 cpu: 0.7% 4: mem: 36.6 MiB (0.9%) command: ibus-x11 pid: 762 cpu: 0.1% 5: mem: 31.8 MiB (0.8%) command: lxterminal pid: 2040 cpu: 0.5% Info: Processes: 183 Uptime: 7m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.06

inxi Results

System:    Kernel: 5.10.63-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=45d60680-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: c03114 
           Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 3.82 GiB used: 689 MiB (17.6%) gpu: 256 MiB 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: 0 stepping: 3 bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.63-v7l+ running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: down mac:  
           IF-ID-1: wg0 state: unknown speed: N/A duplex: N/A mac: N/A 
           IP v4:  scope: global 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0 
           sub-v: 6119 hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 111.79 GiB used: 5.11 GiB (4.6%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB model: RGB 120G B PSSD size: 111.79 GiB 
           block-size: physical: 512 B logical: 512 B type: SSD rev: S123 
           scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 111.54 GiB size: 109.28 GiB (97.98%) used: 5.06 GiB (4.6%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: 87b585d1-84c3-486a-8f3d-77cf16f84f30 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7616-4FD8 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s power: 896mA chip-ID: 2109:0715 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 1661 lib: 888 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/dicaffeine.list 
           1: deb https: //dicaffeine.com/repository/ buster main non-free
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 183 
           1: cpu: 1.9% command: stats.py started by: python3 pid: 364 mem: 11.0 MiB (0.2%) 
           2: cpu: 1.4% command: init pid: 1 mem: 8.25 MiB (0.2%) 
           3: cpu: 1.4% command: xorg pid: 598 mem: 56.4 MiB (1.5%) 
           4: cpu: 1.3% command: [kworker/u8:2-events_unbound] pid: 6029 mem: 0.00 MiB (0.0%) 
           5: cpu: 1.1% command: lxpanel pid: 775 mem: 31.4 MiB (0.8%) 
           Memory top: 5 of 183 
           1: mem: 56.4 MiB (1.5%) command: xorg pid: 598 cpu: 1.4% 
           2: mem: 47.5 MiB (1.2%) command: ibus-ui-gtk3 pid: 757 cpu: 0.2% 
           3: mem: 41.3 MiB (1.1%) command: ibus-extension-gtk3 pid: 758 cpu: 0.7% 
           4: mem: 36.6 MiB (0.9%) command: ibus-x11 pid: 762 cpu: 0.1% 
           5: mem: 31.8 MiB (0.8%) command: lxterminal pid: 2040 cpu: 0.5% 
Info:      Processes: 183 Uptime: 7m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release 
           inxi: 3.3.06

Benchmark #51027 - Brand: KingDian RGB 2.5" SSD