Benchmark #51393 - pibenchmarks.com

Brand: Kingston A400S Series
SSD (2.5" SATA)
#1 / 1,679
2,915
#647 / 1,679
#624 / 984
#159 / 370
6,241
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-10-18 02:58:43
#51,393
2,565
-3,676 (-143.31%)
Anonymous
Rpi3 + Kingston A400 120gb

Storage Details
Kingston A400S Series
SSD (2.5" SATA)
120G
SSD
Kingston
SA400S37120G
SATA
2.10
480
0080:a001
0x0080 (Unknown)
0xa001 (JMS578 based SATA bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
ARMv7 v7l
4
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
35 MB/s
33.24 MB/s
33.44 MB/s
1,615 IOPS
2,238 IOPS
6,461 KB/s
8,955 KB/s
10,561 KB/s
11,942 KB/s
9,440 KB/s
13,531 KB/s

inxi Results
System: Kernel: 5.10.60-v7+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 999.2 MiB used: 658.3 MiB (65.9%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 90x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.60-v7+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:5 chip-ID: 0424:7800 class-ID: ff00 IF: eth0 state: down mac: IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-3: veth19e359d state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth3391e14 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth65a6c82 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth6b50d2d state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth6e703e5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethaa5c543 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethb5b0883 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethe2cfab8 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethe338be1 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: vethe5addbd state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vethfa7fe90 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 33.39 GiB (29.9%) ID-1: /dev/sda maj-min: 8:0 type: USB model: TO Exter nal USB 3.0 size: 111.79 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 0203 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.54 GiB size: 109.73 GiB (98.38%) used: 33.34 GiB (30.4%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 9F2D-0578 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 1024 MiB used: 320.8 MiB (31.3%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00 Hub-4: 1-1.1.3:4 info: Unknown Manufacturer hub ports: 4 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 0a05:7211 class-ID: 0900 Device-1: 1-1.1.X.X:7 info: Texas Instruments type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 50mA chip-ID: 0451:16a8 class-ID: 0a00 Device-2: 1-1.3:6 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 0080:a001 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2144 lib: 976 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/mosquitto-buster.list 1: deb https: //repo.mosquitto.org/debian buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 266 1: cpu: 45.6% command: python3 pid: 15143 mem: 179.8 MiB (19.4%) 2: cpu: 9.5% command: pulseaudio pid: 3870 mem: 0.20 MiB (0.0%) 3: cpu: 5.0% command: [kworker/3:3-events] pid: 26241 mem: 0.00 MiB (0.0%) 4: cpu: 3.5% command: [kworker/1:2-events_power_efficient] pid: 20631 mem: 0.00 MiB (0.0%) 5: cpu: 3.1% command: [kworker/1:0-events_power_efficient] pid: 23903 mem: 0.00 MiB (0.0%) Memory top: 5 of 266 1: mem: 179.8 MiB (19.4%) command: python3 pid: 15143 cpu: 45.6% 2: mem: 45.9 MiB (4.9%) command: ./adguardhome pid: 6039 cpu: 0.4% 3: mem: 42.9 MiB (4.6%) command: node-red pid: 8309 cpu: 1.5% 4: mem: 27.7 MiB (2.9%) command: dockerd pid: 519 cpu: 2.4% 5: mem: 23.2 MiB (2.5%) command: python3 pid: 2139 cpu: 2.0% Info: Processes: 266 Uptime: 5d 19h 7m Init: systemd v: 241 runlevel: 3 target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.07

inxi Results

System:    Kernel: 5.10.60-v7+ armv7l bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480
           bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
           console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
           Console: tty 1 Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835
           rev: a020d3 Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 999.2 MiB used: 658.3 MiB (65.9%) gpu: 76 MiB
           RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l
           family: 7 model-id: 0 stepping: 4 bogomips: 358
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400
           4: 1400
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32
           vfpv3 vfpv4
           Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc
           class-ID: fb
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.org 1.20.4 driver: loaded: fbturbo tty: 90x30
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.60-v7+ running: yes
           Sound Server-2: JACK v: 1.9.12 running: no
           Sound Server-3: PulseAudio v: 12.2 running: no
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:3f300000 class-ID: mmcnr
           IF: wlan0 state: up mac: 
           IP v4:  type: dynamic noprefixroute scope: global broadcast: 
           IP v6:  scope: link
           Device-2: Standard Microsystems type: USB driver: lan78xx bus-ID: 1-1.1.1:5
           chip-ID: 0424:7800 class-ID: ff00
           IF: eth0 state: down mac: 
           IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
           IP v4:  scope: global broadcast: 
           IP v6:  scope: link
           IF-ID-3: veth19e359d state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-4: veth3391e14 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-5: veth65a6c82 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-6: veth6b50d2d state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-7: veth6e703e5 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-8: vethaa5c543 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-9: vethb5b0883 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-10: vethe2cfab8 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-11: vethe338be1 state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-12: vethe5addbd state: up speed: 10000 Mbps duplex: full mac: 
           IF-ID-13: vethfa7fe90 state: up speed: 10000 Mbps duplex: full mac: 
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
           service-classes: rendering, capturing, telephony
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 111.79 GiB used: 33.39 GiB (29.9%)
           ID-1: /dev/sda maj-min: 8:0 type: USB model: TO Exter nal USB 3.0 size: 111.79 GiB
           block-size: physical: 512 B logical: 512 B type: N/A rev: 0203
           scheme: MBR
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 111.54 GiB size: 109.73 GiB (98.38%) used: 33.34 GiB (30.4%) fs: ext4
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 9F2D-0578
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 1024 MiB used: 320.8 MiB (31.3%) priority: -2
           file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s
           power: 2mA chip-ID: 0424:2514 class-ID: 0900
           Hub-3: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0
           speed: 480 Mb/s power: 2mA chip-ID: 0424:2514 class-ID: 0900
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx
           interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 0424:7800 class-ID: ff00
           Hub-4: 1-1.1.3:4 info: Unknown Manufacturer hub ports: 4 rev: 2.0 speed: 12 Mb/s
           power: 100mA chip-ID: 0a05:7211 class-ID: 0900
           Device-1: 1-1.1.X.X:7 info: Texas Instruments type: Abstract (modem),CDC-Data
           driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 50mA chip-ID: 0451:16a8
           class-ID: 0a00 Device-2: 1-1.3:6 info: N/A type: Mass Storage driver: usb-storage interfaces: 1
           rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 0080:a001 class-ID: 0806
           Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: apt: 2144 lib: 976
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/mosquitto-buster.list
           1: deb https: //repo.mosquitto.org/debian buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 266
           1: cpu: 45.6% command: python3 pid: 15143 mem: 179.8 MiB (19.4%)
           2: cpu: 9.5% command: pulseaudio pid: 3870 mem: 0.20 MiB (0.0%)
           3: cpu: 5.0% command: [kworker/3:3-events] pid: 26241 mem: 0.00 MiB (0.0%)
           4: cpu: 3.5% command: [kworker/1:2-events_power_efficient] pid: 20631
           mem: 0.00 MiB (0.0%)
           5: cpu: 3.1% command: [kworker/1:0-events_power_efficient] pid: 23903
           mem: 0.00 MiB (0.0%)
           Memory top: 5 of 266
           1: mem: 179.8 MiB (19.4%) command: python3 pid: 15143 cpu: 45.6%
           2: mem: 45.9 MiB (4.9%) command: ./adguardhome pid: 6039 cpu: 0.4%
           3: mem: 42.9 MiB (4.6%) command: node-red pid: 8309 cpu: 1.5%
           4: mem: 27.7 MiB (2.9%) command: dockerd pid: 519 cpu: 2.4%
           5: mem: 23.2 MiB (2.5%) command: python3 pid: 2139 cpu: 2.0%
Info:      Processes: 266 Uptime: 5d 19h 7m Init: systemd v: 241 runlevel: 3
           target: multi-user.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8
           Client: shell wrapper v: 5.0.3-release inxi: 3.3.07

Benchmark #51393 - Brand: Kingston A400S Series